VoIP One-way Audio and Voice drops
-
@Dashrender said:
Try your phone again directly to the SIP trunk.
I will tomorrow when the issues start up again. Right now everything is working as expected.
-
@coliver said:
It is obviously a load issue. After ~3-4 pm I no longer see any issues. During the weekend I also saw no issues.
A network load issue. Maybe on the ISP's end? It could be, while unlikely, that RTP traffic is being completely dropped under saturation, kind of like inverted QoS.
-
@coliver said:
@Dashrender said:
Try your phone again directly to the SIP trunk.
I will tomorrow when the issues start up again. Right now everything is working as expected.
I thought that I read that that was tested already?
-
@scottalanmiller said:
@coliver said:
@Dashrender said:
Try your phone again directly to the SIP trunk.
I will tomorrow when the issues start up again. Right now everything is working as expected.
I thought that I read that that was tested already?
I tested a third party SIP Trunk. Haven't done that with the ISP trunk yet.
-
Ah, okay. Thanks.
-
@scottalanmiller said:
@coliver said:
It is obviously a load issue. After ~3-4 pm I no longer see any issues. During the weekend I also saw no issues.
A network load issue. Maybe on the ISP's end? It could be, while unlikely, that RTP traffic is being completely dropped under saturation, kind of like inverted QoS.
Came in this morning to the same issues. I'm in early before most people. The only difference between now and last night is that the manufacturing facility is here and working. Generally they shutdown ~3:30-4:30pm.
-
Do you have good traffic monitoring to get a history on the network saturation and compare it to phone issues?
-
@scottalanmiller said:
Do you have good traffic monitoring to get a history on the network saturation and compare it to phone issues?
No.
-
Might be worth looking into that. There are some free options for that. Ubiquiti and Meraki both have some built in options that are better than nothing. But you can use free tools to collect total traffic from them (at least from the Ubiquiti) that will provide you some historical numbers which should help a lot for correlating that. I would start by tracking when the phones are good and bad in a manual "log".
My guess is that Solarwinds has something free and easy to use for this scale.
-
@scottalanmiller said:
Might be worth looking into that. There are some free options for that. Ubiquiti and Meraki both have some built in options that are better than nothing. But you can use free tools to collect total traffic from them (at least from the Ubiquiti) that will provide you some historical numbers which should help a lot for correlating that. I would start by tracking when the phones are good and bad in a manual "log".
My guess is that Solarwinds has something free and easy to use for this scale.
The problem is that they are always bad. Seems to be every 5-10 seconds that they cut out.
-
@scottalanmiller said:
Might be worth looking into that. There are some free options for that. Ubiquiti and Meraki both have some built in options that are better than nothing. But you can use free tools to collect total traffic from them (at least from the Ubiquiti) that will provide you some historical numbers which should help a lot for correlating that. I would start by tracking when the phones are good and bad in a manual "log".
My guess is that Solarwinds has something free and easy to use for this scale.
Thanks, I grabbed a SolarWinds Real-Time monitor (under their free section) lets see if that will help.
-
Just an update to what I worked on last night.
- PBX is now on its own dedicated host, no other VMs are running
- PBX is running on an SSD array with a dedicated ethernet port on the host
- PBX has a dedicated line to the firewall
- Desk phone is wired directly to the firewall
My testing this morning has shown that we still have intermittent audio problem on both SIP Trunks during any call. Either if the SIP trunk is registered directly to the phone or if it is registered to the PBX.
Just from the last 10 minutes of real-time logging it looks like every switch port is seeing under 1% utilization. I've got a few more to check out still though.
-
@coliver said:
@scottalanmiller said:
Might be worth looking into that. There are some free options for that. Ubiquiti and Meraki both have some built in options that are better than nothing. But you can use free tools to collect total traffic from them (at least from the Ubiquiti) that will provide you some historical numbers which should help a lot for correlating that. I would start by tracking when the phones are good and bad in a manual "log".
My guess is that Solarwinds has something free and easy to use for this scale.
Thanks, I grabbed a SolarWinds Real-Time monitor (under their free section) lets see if that will help.
That's the one that I was thinking of.
-
@coliver said:
@scottalanmiller said:
Might be worth looking into that. There are some free options for that. Ubiquiti and Meraki both have some built in options that are better than nothing. But you can use free tools to collect total traffic from them (at least from the Ubiquiti) that will provide you some historical numbers which should help a lot for correlating that. I would start by tracking when the phones are good and bad in a manual "log".
My guess is that Solarwinds has something free and easy to use for this scale.
The problem is that they are always bad. Seems to be every 5-10 seconds that they cut out.
Wait, they drop from time to time or it drops after five seconds and never comes back?
-
@coliver said:
Just from the last 10 minutes of real-time logging it looks like every switch port is seeing under 1% utilization. I've got a few more to check out still though.
Don't really care about switch ports. It's the WAN link that matters.
-
@scottalanmiller said:
@coliver said:
@scottalanmiller said:
Might be worth looking into that. There are some free options for that. Ubiquiti and Meraki both have some built in options that are better than nothing. But you can use free tools to collect total traffic from them (at least from the Ubiquiti) that will provide you some historical numbers which should help a lot for correlating that. I would start by tracking when the phones are good and bad in a manual "log".
My guess is that Solarwinds has something free and easy to use for this scale.
The problem is that they are always bad. Seems to be every 5-10 seconds that they cut out.
Wait, they drop from time to time or it drops after five seconds and never comes back?
Drops for a few seconds every 10-15 seconds then picks back up again.
-
@scottalanmiller said:
@coliver said:
Just from the last 10 minutes of real-time logging it looks like every switch port is seeing under 1% utilization. I've got a few more to check out still though.
Don't really care about switch ports. It's the WAN link that matters.
That one isn't as easy as the switch ports... Meraki doesn't really support SNMP, it says it does but I've never really found anything that can correctly read it.
-
@coliver said:
@scottalanmiller said:
@coliver said:
@scottalanmiller said:
Might be worth looking into that. There are some free options for that. Ubiquiti and Meraki both have some built in options that are better than nothing. But you can use free tools to collect total traffic from them (at least from the Ubiquiti) that will provide you some historical numbers which should help a lot for correlating that. I would start by tracking when the phones are good and bad in a manual "log".
My guess is that Solarwinds has something free and easy to use for this scale.
The problem is that they are always bad. Seems to be every 5-10 seconds that they cut out.
Wait, they drop from time to time or it drops after five seconds and never comes back?
Drops for a few seconds every 10-15 seconds then picks back up again.
OH! That is very different from what we've been thinking. Or at least what I've been thinking. That's a dropping issue, not one way audio. One way audio, or what is often called that, is that just one way gets audio. This is one way has audio cutting out. Not the same. Not sure how to term them, but I was thinking you were referring to a set up issue. This is definitely unrelated to STUN or NAT or anything like that, those don't "come back".
This is almost certainly a WAN saturation issue and or packet loss issue. You are losing RTP packets or they are so late that they are thrown away. Pretty much this is your WAN or your SIP trunk provider. Nothing that you can fix yourself.
-
@coliver said:
That one isn't as easy as the switch ports... Meraki doesn't really support SNMP, it says it does but I've never really found anything that can correctly read it.
Yeah, go to Ubiquiti for better testing. Meraki falls above the home use category, but below the enterprise category. It's pretty low end SMB in a lot of its capabilities and features and performance (and support.)
I have a tough time with Meraki. In some ways it's a solid SMB piece of gear. In other ways, their failure to keep pace with the industry because of products like Ubiquiti makes it, in many ways, fall solidly below the home line and actually become a level of gear that, even if it was dirt cheap, I wouldn't use anymore. Meraki started strong, but these days I'd list it pretty much as consumer gear. It's not "bad", it just isn't "good enough" to meet a minimum standard.
-
@scottalanmiller said:
@coliver said:
@scottalanmiller said:
@coliver said:
@scottalanmiller said:
Might be worth looking into that. There are some free options for that. Ubiquiti and Meraki both have some built in options that are better than nothing. But you can use free tools to collect total traffic from them (at least from the Ubiquiti) that will provide you some historical numbers which should help a lot for correlating that. I would start by tracking when the phones are good and bad in a manual "log".
My guess is that Solarwinds has something free and easy to use for this scale.
The problem is that they are always bad. Seems to be every 5-10 seconds that they cut out.
Wait, they drop from time to time or it drops after five seconds and never comes back?
Drops for a few seconds every 10-15 seconds then picks back up again.
OH! That is very different from what we've been thinking. Or at least what I've been thinking. That's a dropping issue, not one way audio. One way audio, or what is often called that, is that just one way gets audio. This is one way has audio cutting out. Not the same. Not sure how to term them, but I was thinking you were referring to a set up issue. This is definitely unrelated to STUN or NAT or anything like that, those don't "come back".
This is almost certainly a WAN saturation issue and or packet loss issue. You are losing RTP packets or they are so late that they are thrown away. Pretty much this is your WAN or your SIP trunk provider. Nothing that you can fix yourself.
I'm getting packet loss on the PBX which didn't exist on Friday when these issues started, it was just insane latency at that point, now I am getting 10-30% (depending on the ping) packet loss on the PBX. Oddly I don't get any of that on my desktop. Both are plugged directly into the firewall, the phone I used to test the 3rd party SIP trunk was also directly attached to the firewall.
PBX
Desktop
Both had been running for about the same amount of time and both had been started at the same time.