Posts made by triple9

VirtualBox 5.1.18 on Win 7, installed Tumbleweed, no problems at all.
Used both NET-x86_64-Snapshot20170320 and DVD-x86_64-Snapshot20170320, bridge and NAT mode.

@scottalanmiller maybe this can help https://forums.opensuse.org/showthread.php/517325-Opensuse-Tumbleweed-won-t-start-on-Virtualbox

One more trouble? Or epic fail?
I've had one with FreeNAS, and it was enough for me. It was RAID10, complete data loss. It was only backup target, luckily for me and my client. Moved to pure Samba.

@hobbit666 glad to hear it works

you did restart openvpn server?

Last thing that comes to my mind is to disable firewall on server (for test only) or to add

iptables -A INPUT -i tun+ -j ACCEPT

to allow all traffic coming to tun interface.

For further troubleshooting I would need log files.

@hobbit666 said in OpenVPN issues:

;comp-lzo

you have different settings for compression in server (disabled) and client (enabled) conf. I believe this could be your problem.

you can't ping 10.8.0.1 or 10.0.1.165?
There are few things to check:
On server, check if ip forwarding is on: cat /proc/sys/net/ipv4/ip_forward
On Windows 10, try to disable firewall and check if OpenVPN GUI is run as administrator.

@scottalanmiller exactly. However, if I remember correctly, I did use other IP address. It was clear to me that I need NEW IP address for DC.

@alefattorini what's more funny, I could update system, and perform other tasks. But AD DC installation was stuck at nearly 50% and would not move from that point

@alefattorini the problems started when I tried to add bridge. Server lost connectivity, and I had to remove bridge manually to get it back online. I'll try with fresh install and see if it happens again.

@alefattorini I tried NethServer, it seems really nice, very polished. I liked OpenVPN part a lot, though I would like to see self-service portal for end users, where they could download ovpn file (or have I missed it?)
I had one problem, not sure if I'm to blame. I wanted to setup server as AD DC, and things went really bad. Installation was stuck in the middle, and I could not stop it or do anything with it. I didn't have time to investigate what happened, but I plan to do it later.

Is there any filtering in postfix, like amavis, spamassassin?

Maybe your firewall is blocking connection. Try to stop firewall and check if it works. Maybe you or somebody else changed some rules.

I used Grandstream GXV3240 and Cisco SPA525G2. It was ok, but not really great. It all depends on quality of wireless network. Interference can be problem. Had better results with DECT phones (base unit on IP)

I would, to start with, check if your DHCP pool has available addresses. Next time you have this situation, check IP settings on computer with problem. If your adapter has IP from 169.x.x.x range you can be pretty sure DHCP is to blame.

Next, I would check if you have another DHCP server in network, eg some WiFi router or something like that. Maybe it hands out IP from another pool or with wrong IP settings.

Also, I would test if I can ping some internal IP - your default gateway and if that works, try to ping 8.8.8.8. This way you can test if you have connectivity at all or DNS server doesn't work.

@thwr said in 10G Edge Router/Firewall:

@triple9 said in 10G Edge Router/Firewall:

@thwr said in 10G Edge Router/Firewall:

@triple9 said in 10G Edge Router/Firewall:

@thwr said in 10G Edge Router/Firewall:

@triple9 said in 10G Edge Router/Firewall:

https://routerboard.com/CCR1072-1G-8Splus 3050 USD
https://routerboard.com/CCR1036-8G-2SplusEM 1295 USD

Thanks. Isn't that Mikrotik hardware?

yes, Routerboard if their hw brand, as RouterOS is for software

Heard some bad things about it. Will take another look, thanks again

like what?

like poor software, bugs, failing hardware and what not

for these particular models or in general? I use routerboards a lot (from smallest up to CCR1009) and it never failed. I don't know for 1036 and 1072.

@thwr said in 10G Edge Router/Firewall:

@triple9 said in 10G Edge Router/Firewall:

@thwr said in 10G Edge Router/Firewall:

@triple9 said in 10G Edge Router/Firewall:

https://routerboard.com/CCR1072-1G-8Splus 3050 USD
https://routerboard.com/CCR1036-8G-2SplusEM 1295 USD

Thanks. Isn't that Mikrotik hardware?

yes, Routerboard if their hw brand, as RouterOS is for software

Heard some bad things about it. Will take another look, thanks again

like what?

@thwr said in 10G Edge Router/Firewall:

@triple9 said in 10G Edge Router/Firewall:

https://routerboard.com/CCR1072-1G-8Splus 3050 USD
https://routerboard.com/CCR1036-8G-2SplusEM 1295 USD

Thanks. Isn't that Mikrotik hardware?

yes, Routerboard if their hw brand, as RouterOS is for software

https://routerboard.com/CCR1072-1G-8Splus 3050 USD
https://routerboard.com/CCR1036-8G-2SplusEM 1295 USD

@scottalanmiller said in Did you ever try NethServer ?:

@alefattorini said in Did you ever try NethServer ?:

@triple9 we're working on Asterisk 13 and Freepbx 14. They are going to be available by the summer

A full integration so that the system can be used as a complete PBX? Or just for faxing?

as stated on referenced URL:

*We are working very proudly to have Asterisk 13 and FreePBX 14 on NethServer 7!

They are useful to turn your NethServer 7 into a phone switchboard!*