@thecreativeone91 I connected the hard disk same port only but the RAID was not able to rebuild Why?

@scottalanmiller The server shows the error as SMART failure in the hard disk.I am having A and B which are old hard disk already connected in HP Proliant DL160 G5.I went to client place with the hard disk C.I went and inserted only C to the server and B in the server where the hard disk is already connected in the server.Then I booted the hard disk.Before going to array utility,it shows two hard disk C at 3.00Gb/s Data Rate and B at 1.5 Gb/s data rate.Then I went to array utility console and added the new hard disk from the Configure Disk option and went to manage array option and saw the two disk.The C hard disk is connected at 00 Port and B at 01 Port of the server.So the hard disk is not able to rebuild.So I deleted only the 00 Port that is new hard disk from the utility.And after that the user said he needs to take backup of data.So I connected A and B hard disk for taking backup.He took backup and after that I inserted C and B in their own places.But now the B hard disk shown as the hard disk to be added for building RAID1.But I didnot installed or rebuilded RAID 1 at new hard disk.So when I tried to boot the two hard disk,automatically Windows Server 2008 R2 installed in the server and after reboot of the server,there is no data present in the server?How this happened I cant understand why this happened?

I have faced one issue with the HP Proliant Server DL160G5.I have tried to change new hard disk in RAID1 server.The error shown in server is that SMART Failure in one of the hard disk.So I went to Client place and tried to change the hard disk in Array Utility console.When I connected the new hard disk it does not have the option to add as a hard spare.My aim is only to take 1 hard disk from the server.When I added the new hard disk it does not join into the array and the arrayed was destroyed without doing anything.How it was madde?

OK I will try that at my office on monday.

@thecreativeone91 I added NIC card from the VM settings and added new device as Network Adapter

I cannot access the Centos system from Windows XP with the above IP table.Why?

Whether the above IP table is correct to acces the Centos machine from other machine in Putty.

@thanksajdotcom Ok OK AJ

I need to know how to write iptable in Centos 6.5 and to open only ssh port and ping port to take the system only in putty to check the status

@thanksajdotcom This smoothwall seems to be ISO file.I need to do that only in CentOS 6.5

@thanksajdotcom OK I understood I am in sleepy mood.So forgot that

@thanksajdotcom Ok I will do in morning at office.Its around 1 AM

@thecreativeone91 how to download ?sudo apt-get install ????

When I tried to give the centos machine IP as 192.168.200.40/24 and gateway as 192.168.200.1/24.But the system in VM did not ping after giving gateway in the ifconfig of eth0

@scottalanmiller Ok OK.I need to install the smoothwall in the centos and after that I need to do that.Right

@scottalanmiller My manager said me to install firewall with IPtables only

@scottalanmiller Can you explain Scott

@scottalanmiller Yes Scott I got somewhat confused

@thecreativeone91 If this is possible to do?

@thanksajdotcom said:

nother way to do it.

Can you explain how to do it in Ceentos in minimal mode?