ZeroTier + Active Directory Authentication
-
@Dashrender said:
I really like the idea of ZT over traditional VPN, because both JB and I are accustomed to VPN clients that won't load before a user logs on, and therefore can't get GPOs, or passwords that were changed on a different device, etc, etc, etc.
But that's not traditional VPN. You are having an issue with having either had a problem with configuring a VPN or choosing a really poor one (Cisco is garbage in my experience.) I've been working with VPNs since 1999 extensively and the issues you face are ones that I've never had until one job that used a Cisco client just recently and that's when I found out for the first time that anyone was having this as an issue!
I think you are associated something with non-mesh VPNs that simply isn't true and associating something with mesh VPNs that is also not true (ZT can be designed to start later or only with user intervention just like Cisco) and confusing that you want a VPN that connects automatically with the concept of full mesh software defined networking. Leading you to feel like you need one tool but refusing to embrace it and use it as intended. You are really looking for a traditional VPN in every way.
-
@Dashrender said:
I really like the idea of ZT over traditional VPN....
I don't understand this statement. The thing that makes this unique is the full mesh aspect, the one part you don't like. What about ZT do you like if not the part that sets it apart?
-
@Dashrender said:
At this point, due to my very small mobile workforce compared to non mobile - I know I need to consider if this solution, as good as it maybe, might not be what I need.
Or just accept that the minor problem of deploying everywhere isn't really a problem worth actually considering. What does a full environment roll out take? Some effort, sure. But a lot? I doubt that it takes enough to really be worried about it. I have been rolling it out with servers recently and the big effort is just logging into the console.
-
@scottalanmiller said:
@Dashrender said:
Well shortly after ZT came on the scene here on ML you, Scott, told me I was looking at ZT and Pertino all wrong. It's an all or nothing type of solution - that's how it was designed. Which is fine - But.....
Read your lead up and then.... but...
Are you sure you want a but there? I mean, you understand that you are looking at it wrong and not embracing it, but you are going to come up with a reason why you are an exception. Which maybe you are, but are you really both an exception to the deployment design and right for this tool?
No I'm sure I'm not both - I'm sure I should be on something else. I guess that was what I was meaning to say.
-
@Dashrender said:
No I'm sure I'm not both - I'm sure I should be on something else. I guess that was what I was meaning to say.
While I think that ZT on everything is likely the best choice, if all you want is a hub and spoke... you really want to have a hub and spoke. OpenVPN and IPSec work great for this, it's really what they are architected to do.
-
@scottalanmiller You could also bridge it to a physical network if you have old boxes, printers, fax machines, etc. A Raspberry Pi makes a great bridge for $30.
-
@scottalanmiller said:
@Dashrender said:
At this point, due to my very small mobile workforce compared to non mobile - I know I need to consider if this solution, as good as it maybe, might not be what I need.
Or just accept that the minor problem of deploying everywhere isn't really a problem worth actually considering. What does a full environment roll out take? Some effort, sure. But a lot? I doubt that it takes enough to really be worried about it. I have been rolling it out with servers recently and the big effort is just logging into the console.
It's not the effort itself, as I said, I could walk around and get it done in two days. At this point, considering you're telling me that if I use a different VPN solution I'll probably get what I want ( pre logon VPN connections).
A concern is if the complexity is worth it considering my end goal.
-
Something to consider is that the effort to learn and deploy a solution like OpenVPN will likely be several times more time consuming and difficult than rolling ZT out to nodes that don't absolutely require a VPN connection. It's a trade off... do you care about your time, effort and flexibility or do you care about deploying the software to more nodes? Depends on your total network, of course, it's not that simple. But we moved to this model because deploying to every node was a fraction of the effort of OpenVPN to some nodes.
-
@Dashrender said:
A concern is if the complexity is worth it considering my end goal.
In this case, it's hard to know which is more complex. Setting up a VPN solution that does what you need might be more complex to you than ZT. We have ZT running and it is super simple.
-
@adam.ierymenko said:
@scottalanmiller You could also bridge it to a physical network if you have old boxes, printers, fax machines, etc. A Raspberry Pi makes a great bridge for $30.
I know this is a huge topic - one that I've even participated in. But how realistic is it that you'll want printer access while not onsite? At that point won't the local IP scheme solve the issue?
I suppose if the goal is to never worry about a local network, live purely in the ZT LAN, then this is worthwhile.
-
@Dashrender said:
I know this is a huge topic - one that I've even participated in. But how realistic is it that you'll want printer access while not onsite? At that point won't the local IP scheme solve the issue?
Right, in most cases, the ZT model does not get complex. Things that can't talk on ZT generally don't need ZT.
-
@scottalanmiller said:
@Dashrender said:
A concern is if the complexity is worth it considering my end goal.
In this case, it's hard to know which is more complex. Setting up a VPN solution that does what you need might be more complex to you than ZT. We have ZT running and it is super simple.
Are you using ZT in a Windows based network with AD, DNS etc? How's that working for you if you are? Though in a full on mesh network, I would expect it to work OK or even better than OK.
it's only the half installed situation that it becomes a problem with ZT IP's showing up in DNS for clients that aren't on the ZT network.
-
@Dashrender said:
Are you using ZT in a Windows based network with AD, DNS etc? How's that working for you if you are? Though in a full on mesh network, I would expect it to work OK or even better than OK.
No AD right now on ZT, although that is in the works. No Windows on it right now, just Linux. But in full mesh experience, no issues with AD at all.
-
@Dashrender said:
it's only the half installed situation that it becomes a problem with ZT IP's showing up in DNS for clients that aren't on the ZT network.
Right, the only scenario I would pretty much not entertain is this one. A partial deployment means all of the complexity of the SDN with all of the complexity of managing a VPN in the traditional way along with quite a few additional complications from the lack of intention in design. This introduces problems that neither full mesh nor hub and spoke face.
-
@scottalanmiller If you try AD feel free to update this thread and/or https://www.zerotier.com/community/topic/22/the-big-zerotier-active-directory-lan-virtualization-thread-retitled/2 -- would be helpful
-
LOL - the problem is - that thread is JB's. Where he's trying to deploy ZT but not to every endpoint.
-
Yeah, my tests would not be useful there. He already knows that it works in the modes that we would use it in.
-
@adam.ierymenko said:
@scottalanmiller You could also bridge it to a physical network if you have old boxes, printers, fax machines, etc. A Raspberry Pi makes a great bridge for $30.
Where is this bridge everyone keeps talking about?
-
@FATeknollogee said:
@adam.ierymenko said:
@scottalanmiller You could also bridge it to a physical network if you have old boxes, printers, fax machines, etc. A Raspberry Pi makes a great bridge for $30.
Where is this bridge everyone keeps talking about?
It's just software. install it on whatever you want to install it on.
-
@Dashrender You have a "how to" instruction set?
