Never Let the Vendor Set Up a Server
-
@Carnival-Boy said:
We're not talking about advice.
Sort of, we are. Because the ongoing IT support, unless it is insanely basic and you are directing every little bit of it (which would defeat any value) is a form of advice. It is micro advice rather than macro (advice on RAID setup or whatever rather than architecture or risk mitigation) but still a form of advice. Unless the roles are completely scripted.
Which you could do with a guy doing a rack and stack, but the effort to guide him would easily be ten times or more the effort of doing it yourself.
-
Unless you have hundreds of servers going in by the same guy over and over again. Then having someone do that stuff with a well tested script would be different. But Dell, as an example, doesn't do deployments that big. In 2005 I ran Dells largest server migration ever which was only 69 servers. And that justified script development, but it was three months of planning for a twelve month project. The overhead of the planning was still very high.
-
@scottalanmiller said:
@Carnival-Boy said:
No, I'm mixing the people who sell me things with the people who install things. We're not talking about advice.
Oh, you calling the reseller the MSP? That's REALLY confusing.
Am I? I'm saying that I have a vendor and I buy the server from them and I get them to install and configure it.
-
@Carnival-Boy said:
Am I? I'm saying that I have a vendor and I buy the server from them and I get them to install and configure it.
That's the reseller. If they sold something other than a service, they are a reseller.
So the reseller is making your RAID decisions and hypervisor decisions? Do you have detailed installation instructions for them? How many servers are you installing? This is so little work, what's the value proposition in having them do that? What do you do for reconfigs and updates? I assume that you do those yourself?
-
@scottalanmiller said:
So the reseller is making your RAID decisions and hypervisor decisions? Do you have detailed installation instructions for them?
The answer to all those questions is no. I generally only buy one server every couple of years. It's not a big deal.
I don't see why just because a company also sells hardware as well as services, they have to be a reseller. What if I get the server from elsewhere but get them to do the install? It's the same vendor doing the install. What difference does it make?
-
@Carnival-Boy said:
I don't see why just because a company also sells hardware as well as services, they have to be a reseller.
Because that's what the word means. This is just basic English and has nothing to do with IT or the industry or vendor relationships. The word reseller is simply the term for someone who resells stuff.
-
@Carnival-Boy said:
What if I get the server from elsewhere but get them to do the install? It's the same vendor doing the install. What difference does it make?
They are still a reseller, just not your reseller.
The difference is whether or not you have expertise and ongoing support for IT work being done or if you have someone who isn't your IT staff (internal or external) doing a one off trivial IT setup job that isn't part of your normal oversight.
-
Let's switch it around.... instead of trying to say why it isn't bad, why is it good? A RAID setup is faster to do than to double check and a hypervisor install is a couple of minutes and is often faster to do new than to take the time to look up what someone else did. Where is the value in having someone that isn't an integral part of the IT support network doing those very critical, but entry level, tasks? Is it saving time, money, effort somewhere?
-
Well my clients pay a premium to tack a server because they pay my rate for anything server. The only other rate we have is for the Helpdesk person.
For us though, we are the entire IT department for the clients. So it is just considered part of IT.
-
Advocatus Diaboli: if a vendor/reseller can't setup a server to my (exceptionally basic) specs I will no longer need their services.
Set RAID level
Install OS
Update OS
Install driversBeyond that, completely agree with you Scott.
-
@MattSpeller said:
Advocatus Diaboli: if a vendor/reseller can't setup a server to my (exceptionally basic) specs I will no longer need their services.
That seems a weird reason to not use them. While those things are incredibly basic, the more basic they are the less reason to make them a selection criteria for a vendor that does not understand their nuances and their applicability to your environment. Yes, not following directions reliably is bad, but this is not in their wheelhouse and is in yours. Why select them based on their ability to do your job rather than on the value of their own?
-
@MattSpeller said:
Set RAID level
Install OS
Update OS
Install driversThese are all tasks that you must be competent in and must verify to reliably run servers. Even if a reseller can do this reliably and does it for free, I don't feel that you should ever allow them to do so in order to find out if they can or not. These are standard operational tasks. That the server is being freshly delivered is a very odd break in standard process to have that one special case where a third party does a one time, highly critical engineering setup on your behalf.
-
@scottalanmiller it's common to have that basic stuff included for cheaper than I could do it, or often free. Why would I use a vendor/reseller who wouldn't offer such a basic service? I mean it's not a make or break thing by any means, but certainly saves me a few hours of poke & wait.
-
@MattSpeller said:
@scottalanmiller it's common to have that basic stuff included for cheaper than I could do it, or often free. Why would I use a vendor/reseller who wouldn't offer such a basic service? I mean it's not a make or break thing by any means, but certainly saves me a few hours of poke & wait.
Because it is absolutely critical and needs to be double checked which is just as costly and time consuming as doing it yourself and does not provide the additional benefit of double checking that you have all necessary skills, documentation and resources in order to repeatably do this over and over again.
If you read the original article, I cover why you need to do this yourself and why it isn't connected to the vendor's ability to do this but to having them do it not being a good idea.
This is from first hand watching many companies get burned because they had servers delivered and just enough work done on them and then later, once the workloads are in production, find out that they don't know how to maintain them and are stuck with unsupportable systems (beyond the knowledge of their IT, lacking tools, etc.) in production.
-
@MattSpeller said:
@scottalanmiller it's common to have that basic stuff included for cheaper than I could do it, or often free.
Since it costs just as much (or more) to double check and is a less reliable process. Even free is too costly, right?
-
@MattSpeller said:
I mean it's not a make or break thing by any means, but certainly saves me a few hours of poke & wait.
How is this taking a few hours? A new server build in my experience is normally just a few minutes. If it takes any longer than that, what is happening and what's happening that you would want someone outside of IT doing it without IT insight?
-
At a larger scale I can see how you'd have a solid argument but for basic stuff, sure I check it but it's pretty trivial.
When was the last time you installed a bare metal OS? The updates alone, good grief. Granted you can do other stuff while it grinds, but.... ughh wasted time.
-
@MattSpeller said:
At a larger scale I can see how you'd have a solid argument but for basic stuff, sure I check it but it's pretty trivial.
But how trivial would it have been to do it yourself rather than checking? What are you gaining?
I think a normal server setup that I see is about fifteen minutes and saves time looking things up since you are setting it up in situ rather than elsewhere and reconfiguring the network once it is in place.
-
@scottalanmiller said:
But how trivial would it have been to do it yourself rather than checking? What are you gaining?
Several hours of company time that could be better used for surfing the web and chatting on ML
-
@MattSpeller said:
When was the last time you installed a bare metal OS? The updates alone, good grief. Granted you can do other stuff while it grinds, but.... ughh wasted time.
Long time, since that's a no no. Why are you installing a bare metal OS? I think this is one of those "one lack of best practice cascades to another" situations. Fix the bare metal install, suddenly the best practice of never let someone outside IT set up the server makes sense. Best practices in a vacuum rarely make sense.
