SSDs are obsolete
-
@thecreativeone91 said:
Space. If it's a daughter card with access that would be fine. But on the actual motherboard wouldn't be.
I guess the confusing thing is.... why did you feel the need to mention it, then? Since PCIe can do anything SAS or SATA can, and SAS or SATA could be just on the motherboard but isn't, why did you feel that pointing out that putting large numbers of PCIe drives directly onto the motherboard would be cumbersome? Of course it would, that's why there are cables, daughter cards, external chassis and other options to use. Once drives are routinely on PCIe there will be all kinds of handy physical options. It's only the physicality of the mobo that seems to be an issue, and even that could be solved.
It's like of like saying "this will be fine as long as they don't start selling only trapezoid shaped cases"... was that really a concern?
-
@scottalanmiller said:
@thecreativeone91 said:
Space. If it's a daughter card with access that would be fine. But on the actual motherboard wouldn't be.
I guess the confusing thing is.... why did you feel the need to mention it, then?
Because it was making it sound like it would take the form factor of the current PCIE bus. with no other solutions.
-
@coliver said:
@thecreativeone91 said:
@coliver said:
@thecreativeone91 said:
@coliver said:
@thecreativeone91 said:
I think there may be a change of interface however I don't think putting them directly on the motherboard is a good solution for anything besides laptops/portables. and low end desktops.
Do you mean soldering them into the motherboard? Or you don't think having them communicate over the PCIe (or replacement) connections is a good idea?
I see no problem with using the PCiE bus as long as you put it in a cable form. Putting them directly on the motherboard is very limiting as far as customization whether soldered or not.
I'm not sure I agree with that. (The solder thing totally) How is this any different then current backplanes for SAS or SATA?
Space. If it's a daughter card with access that would be fine. But on the actual motherboard wouldn't be.
With the size of some of the PCIe SSDs out there I don't think space or accessibility will be an issue, at the server level probably but not at the workstation level, They are making some of those SSDs half height cards now. Wasn't there a post about the new PCIe spec having cables which are keyed for different uses?
Desktops. No. But workstations likely would. They are two different things.
-
@thecreativeone91 said:
Because it was making it sound like it would take the form factor of the current PCIE bus. with no other solutions.
But the current bus already has other options, like external cables.
-
Using only what exists today, you could completely replicate the form factors and flexibility of SAS and SATA options. Including hot swap bays.