@scottalanmiller said in How to select right router for 100 users or more?:

Thank you friends and scottaland. That is very clear info & I know what should I get (Edgerouter).

Hello everyone. I am very excited to join this IT home. I am not an expert in the IT field, however, I have practiced this for certain period of times. I am curious to learn and explore more knowledge of modern IT

Can anyone assist me?

I have an account which could make outbound call on X-Lite, however, when I registered on PBX server. It doesn't work even I have created the Outbound call.

Here is what I have seen:

== Using SIP RTP CoS mark 5 
-- Called SIP/PQT/254202020 
[2016-07-01 18:06:35] WARNING[18785][C-00000008]: chan_sip.c:23220 handle_response_invite: Received response: "Forbidden" from '<sip:[email protected]>;tag=as0d753417' 
== Everyone is busy/congested at this time (1:0/0/1) 
-- Executing [s@macro-dialout-trunk:23] NoOp("SIP/132-00000000", "Dial failed for some reason with DIALSTATUS = CHANUNAVAIL and HANGUPCAUSE = 21") in new stack 
-- Executing [s@macro-dialout-trunk:24] GotoIf("SIP/132-00000000", "0?continue,1:s-CHANUNAVAIL,1") in new stack 
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1) 
-- Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] Set("SIP/132-00000000", "RC=21") in new stack 
-- Executing [s-CHANUNAVAIL@macro-dialout-trunk:2] Goto("SIP/132-00000000", "21,1") in new stack 
-- Goto (macro-dialout-trunk,21,1) 
-- Executing [21@macro-dialout-trunk:1] Goto("SIP/132-00000000", "continue,1") in new stack 
-- Goto (macro-dialout-trunk,continue,1) 
-- Executing [continue@macro-dialout-trunk:1] NoOp("SIP/132-00000000", "TRUNK Dial failed due to CHANUNAVAIL HANGUPCAUSE: 21 - failing through to other trunks") in new stack 
-- Executing [continue@macro-dialout-trunk:2] Set("SIP/132-00000000", "CALLERID(number)=132") in new stack 
-- Executing [9000254202020@from-internal:8] Macro("SIP/132-00000000", "outisbusy,") in new stack 
-- Executing [s@macro-outisbusy:1] Progress("SIP/132-00000000", "") in new stack 
-- Executing [s@macro-outisbusy:2] GotoIf("SIP/132-00000000", "0?emergency,1") in new stack 
-- Executing [s@macro-outisbusy:3] GotoIf("SIP/132-00000000", "0?intracompany,1") in new stack
-- Executing [s@macro-outisbusy:4] Playback("SIP/132-00000000", "all-circuits-busy-now&pls-try-call-later, noanswer") in new stack 
-- <SIP/132-00000000> Playing 'all-circuits-busy-now.gsm' (language 'en') 
-- <SIP/132-00000000> Playing 'pls-try-call-later.gsm' (language 'en') 
-- Executing [s@macro-outisbusy:5] Congestion("SIP/132-00000000", "20") in new stack 
[2016-07-01 18:06:39] WARNING[19416][C-00000008]: channel.c:4861 ast_prod: Prodding channel 'SIP/132-00000000' failed 
== Spawn extension (macro-outisbusy, s, 5) exited non-zero on 'SIP/132-00000000' in macro 'outisbusy'

• The TRUNK has the unique port as 5065

@thwr - Drink ? what Drink do you want? Pepsi, soda, coke,... or mango juice?

Dear All,

I have 2 PBX (asterisk) terminal and still wondering of how to transfer extension with extension each other from two different location

Kindly assist

@kelly Thank you Kelly

@scottalanmiller Yes. This port has been designed by them so it is unique

The route I am using which has unique port, not 5060. I think there can be issue here but the outbound call is running well so I am not sure about the incoming call

Dear All,

Thanks for the response. I am using Free PBX (Asterisk)

I can't check the log when the incoming doesn't run

How do I provide you the information?

Dear All,

I need assistance. I have a route which is able to make outbound call but the inbound call doesn't work. I have checked with provider and they say the inbound route is still ok. The call is ended at my site. I tried to configure but it doesn't work

I have done with few route and the incoming calls are OK but with this route I don't know how.

Is there any suggestion of which part should I check?

@scottalanmiller Probably, I have yet updated all them

Should I update all or just update the things i needed?

@smitherick Even I updated the framework. It is the same thing

@hobbit666 I opened on chrome and whenever I click to System Status the notification appears

Dear all,

This notification has appeared on my browser for a week, however I can't remove it.

Whoops\Exception\ErrorException
Call to undefined method Error::singleton()
File:/var/www/html/admin/modules/dashboard/classes/phpsysinfo/includes/output/class.Output.inc.php:40

Looking forward to have your assistance

@jimmy_k Well, I just fixed it
I modified etc/resolv.conf by putting this

nameserver same as DNS1
nameserver same as DNS2