H61MXP Board Issue



  • The H61MXP board is being used in one desktop.The system is not booting.
    The BIOS is going fine.
    The RAM is being changed,the CMOS is changed and then the Jumper is also changed.
    Power Drain done in the machine after that the error coming is "Input not supported "
    What may be the issue with the board?
    The motherboard is new board which is ordered and placed newly.
    Can anyone help on it??



  • You should include vendor names. The H61MXP seems to be a Foxconn/Digilite board.

    Need to guess a bit:

    1. The machine is getting past BIOS (UEFI?) POST?
    2. Storage detected?
    3. BIOS/UEFI configured to boot from storage?

    In case of 1+2+3, this would point to a problem with the bootloader of the OS as the next possible error source.



  • @thwr The vendor is Foxconn.The storage is detected in the bios.The OS start page is showing but after a minute while the Input not supported error coming.
    Whether UEFI needs to be done for the machine ???
    There is no speaker present in the board so unable to hear sound when the RAM is taken out from the board.



  • That almost sounds like corrupt boot and/or system files. Do you have a repair disc handy?



  • @Lakshmana said in H61MXP Board Issue:

    The H61MXP board is being used in one desktop.The system is not booting.
    The BIOS is going fine.
    The RAM is being changed,the CMOS is changed and then the Jumper is also changed.
    Power Drain done in the machine after that the error coming is "Input not supported "
    What may be the issue with the board?
    The motherboard is new board which is ordered and placed newly.
    Can anyone help on it??

    This can occur if the motherboard is even slightly touching the metal frame of the computer case that you screw it into. I know it's unlikely but I'd unscrew it and then make sure everything is lined up 100% correctly.



  • @Lakshmana said in H61MXP Board Issue:

    @thwr The vendor is Foxconn.The storage is detected in the bios.The OS start page is showing but after a minute while the Input not supported error coming.
    Whether UEFI needs to be done for the machine ???
    There is no speaker present in the board so unable to hear sound when the RAM is taken out from the board.

    Whar exactly? And which OS are you using? You need to supply as much information as possible, we can't help otherwise.