Xen Orchestra Backup, Single VM Failing
-
Is Terminated a good thing in this case?
-
-
When it is green, yes. That means the backup finished, I think.
Edit: Dustin beat me to it.
-
@DustinB3403 said:
@coliver said:
Is Terminated a good thing in this case?
If it's red, no.
Green yes.
Ah, that is a bit confusing (I understand the lights.) I saw that when I did my first backup and assumed terminated means something failed.
-
We'll have to bug @oliver if it doesn't change after they get the new UI in place, lol.
-
@olivier -- the xo-server-logs and xo-server are only outputting generic information and don't display anything useful for me to debug this on the screen. Is this written to a file anywhere?
-
You should see something in the
xo-serveroutput right when you trigger the backup job.I'm removing the word "Terminated" by "Finished" ASAP.
-
@olivier said:
You should see something in the
xo-serveroutput right when you trigger the backup job.I'm removing the word "Terminated" by "Finished" ASAP.
Perfect thank you. I don't know why when I see terminated I think "this is bad"... especially when it basically means finished.
-
Yea, terminated has a bad connotation to it... i know i immediately equate it to "fired"
-
There is maybe a notion of "unexpected finish" for "terminated" word. In French, "Terminé" means "finished". That explains why one of the dev use this word
-
-
@olivier said:
Done: https://github.com/vatesfr/xo-web/commit/f9028cb366e6a102a5a0fd54755c7c0163e62a3c
Re job 9: Personally, I would not say finished here. Simply state error or Failure or something.
I know it IS finished. but say you eventually setup an email on job status. how will I route it with rules if both success and failure say finished?
This is how I handle my veeam backup stuff now.
So, all my notices are filtered away unless it has some other status.
https://i.imgur.com/MPZJ1hR.jpg
https://i.imgur.com/D1whu9s.jpg
Well except this warning. These are success too. The damned HP recovery partition always fires a warning on space.
-
I'll need to hire 50 lads to release all those ideas/features
-
I'm having a similar issue, but different, lol. I am unable to backup any of my XenServer VMs. I am using an XO Machine built with @DustinB3403 's instructions. I am connecting to my XenServer using it's inside IP address (192.168.15.1/24) from my XO Server (192.168.15.2/24).
When the backup jobs try to run, my XO Server tires to connect to the PUBLIC IP address of my XenServer.
This poses a problem this is a hosted XenServer instance with a single public IP address... I am using ports 80 and 443 to run an Nginx proxy as a VM.
Is this a bug in XO, by any chance? @olivier ?
If the answer to that question is "NO", then what can I do to fix XenServer so that it only listens on my inside IP addresses?
-
@dafyre How does it even know what the public IP is?
-
@dafyre said:
I'm having a similar issue, but different, lol. I am unable to backup any of my XenServer VMs. I am using an XO Machine built with @DustinB3403 's instructions. I am connecting to my XenServer using it's inside IP address (192.168.15.1/24) from my XO Server (192.168.15.2/24).
When the backup jobs try to run, my XO Server tires to connect to the PUBLIC IP address of my XenServer.
This poses a problem this is a hosted XenServer instance with a single public IP address... I am using ports 80 and 443 to run an Nginx proxy as a VM.
Is this a bug in XO, by any chance? @olivier ?
If the answer to that question is "NO", then what can I do to fix XenServer so that it only listens on my inside IP addresses?
You're running XO in a vm on the XenServer?
-
@johnhooks said:
@dafyre said:
I'm having a similar issue, but different, lol. I am unable to backup any of my XenServer VMs. I am using an XO Machine built with @DustinB3403 's instructions. I am connecting to my XenServer using it's inside IP address (192.168.15.1/24) from my XO Server (192.168.15.2/24).
When the backup jobs try to run, my XO Server tires to connect to the PUBLIC IP address of my XenServer.
This poses a problem this is a hosted XenServer instance with a single public IP address... I am using ports 80 and 443 to run an Nginx proxy as a VM.
Is this a bug in XO, by any chance? @olivier ?
If the answer to that question is "NO", then what can I do to fix XenServer so that it only listens on my inside IP addresses?
You're running XO in a vm on the XenServer?
Yes.
That is normal.
-
@DustinB3403 said:
@johnhooks said:
@dafyre said:
I'm having a similar issue, but different, lol. I am unable to backup any of my XenServer VMs. I am using an XO Machine built with @DustinB3403 's instructions. I am connecting to my XenServer using it's inside IP address (192.168.15.1/24) from my XO Server (192.168.15.2/24).
When the backup jobs try to run, my XO Server tires to connect to the PUBLIC IP address of my XenServer.
This poses a problem this is a hosted XenServer instance with a single public IP address... I am using ports 80 and 443 to run an Nginx proxy as a VM.
Is this a bug in XO, by any chance? @olivier ?
If the answer to that question is "NO", then what can I do to fix XenServer so that it only listens on my inside IP addresses?
You're running XO in a vm on the XenServer?
Yes.
That is normal.
I just wanted to make sure I understood how he set it up.
-
Now it wouldn't hurt to have a separate host, but on the primary host is also normal.
-
@dafyre said:
I'm having a similar issue, but different, lol. I am unable to backup any of my XenServer VMs. I am using an XO Machine built with @DustinB3403 's instructions. I am connecting to my XenServer using it's inside IP address (192.168.15.1/24) from my XO Server (192.168.15.2/24).
When the backup jobs try to run, my XO Server tires to connect to the PUBLIC IP address of my XenServer.
This poses a problem this is a hosted XenServer instance with a single public IP address... I am using ports 80 and 443 to run an Nginx proxy as a VM.
Is this a bug in XO, by any chance? @olivier ?
If the answer to that question is "NO", then what can I do to fix XenServer so that it only listens on my inside IP addresses?
Another question, is this a bridge for an internal network? Or did they give you a local network for your server?
