Xen Orchestra on Ubuntu 15.10 - Complete installation instructions

DustinB3403

Brandon it looks like you're trying to run the manual installation. Which I haven't updated those instructions in some time.

Use the installation script at the very top of the first post.

brandon

@DustinB3403 Hi DustinB3403, I am copy and pasting from the installation script?
wget https://raw.githubusercontent.com/scottalanmiller/xenorchestra_installer/master/xo_install.sh

DustinB3403

@brandon said in Xen Orchestra on Ubuntu 15.10 - Complete installation instructions:

@DustinB3403 Hi DustinB3403, I am copy and pasting from the installation script?
wget https://raw.githubusercontent.com/scottalanmiller/xenorchestra_installer/master/xo_install.sh

And are you running the script by chmod +x xo_install.sh and then running ./xo_install.sh ?

brandon

@DustinB3403 At first I did "sudo su" then chmod 777 xo_install.sh and then sudo ./xo_install.sh script ran and bugged out so I tried copied and paste everything into the terminal

brandon

@DustinB3403 Debian 7.8 has gotten the closes to installing, Debian 8, Ubuntu 15 and 16 didn't get this far before giving errors

DustinB3403

@brandon Assuming you still have the Ubuntu 16.10 VM you were working on before.

Did you install curl and bash?

If so did you try this exact command?

sudo curl https://raw.githubusercontent.com/scottalanmiller/xenorchestra_installer/master/xo_install.sh | bash

brandon

@DustinB3403 Yes I did I can run it again if you like but it will fail

DustinB3403

I'm troubleshooting some other things for work at the moment. Please create a new post, list what OS you're using and we can proceed from there.

if you connect to the vm with SSH can you log everything into a text file and post it so we can investigate from there.

brandon

@DustinB3403 Okay I have two VM's Debian 7.8 and Ubuntu 16.10 both are clean installs the only thing I did before running the scripts were apt-get update and upgrade... I removed Ubuntu 15 and Debian 8

The previous error was from Debian 7.8...

I just ran sudo curl https://raw.githubusercontent.com/scottalanmiller/xenorchestra_installer/master/xo_install.sh | bash as the root user on Ubuntu will copy and paste the output as soon as it is done, it looks like the script is at npm install & rebuild part in the xo-server dir

DustinB3403

@brandon Using putty on windows you can have it output everything into a log file so you don't have to try and scroll for the info.

brandon

@DustinB3403 Haha sorry I don't use Windows... but will log the output

DustinB3403

@brandon Well, any output tool works.

That was just the first tool to pop to mind.

brandon

Okay after running the script this is what happened:

root@xenorc:/opt# sudo curl https://raw.githubusercontent.com/scottalanmiller/xenorchestra_installer/master/xo_install.sh | bash
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 1146 100 1146 0 0 604 0 0:00:01 0:00:01 --:--:-- 604
Reading package lists... Done
Building dependency tree
Reading state information... Done
nfs-common is already the newest version (1:1.2.8-9.2ubuntu1).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

Installing the NodeSource Node.js v6.x repo...

Populating apt-get cache...

apt-get update
Get:1 http://security.ubuntu.com/ubuntu yakkety-security InRelease [102 kB]
Hit:2 http://za.archive.ubuntu.com/ubuntu yakkety InRelease
Get:3 http://za.archive.ubuntu.com/ubuntu yakkety-updates InRelease [102 kB]
Hit:4 https://deb.nodesource.com/node_6.x yakkety InRelease
Get:5 http://za.archive.ubuntu.com/ubuntu yakkety-backports InRelease [102 kB]
Get:6 http://za.archive.ubuntu.com/ubuntu yakkety-updates/main amd64 Packages [146 kB]
Get:7 http://za.archive.ubuntu.com/ubuntu yakkety-updates/main i386 Packages [144 kB]
Get:8 http://za.archive.ubuntu.com/ubuntu yakkety-updates/universe i386 Packages [76.0 kB]
Get:9 http://za.archive.ubuntu.com/ubuntu yakkety-updates/universe amd64 Packages [78.4 kB]
Fetched 752 kB in 1s (392 kB/s)
Reading package lists... Done

Confirming "yakkety" is supported...

curl -sLf -o /dev/null 'https://deb.nodesource.com/node_6.x/dists/yakkety/Release'

Adding the NodeSource signing key to your keyring...

curl -s https://deb.nodesource.com/gpgkey/nodesource.gpg.key | apt-key add -
OK

Creating apt sources list file for the NodeSource Node.js v6.x repo...

echo 'deb https://deb.nodesource.com/node_6.x yakkety main' > /etc/apt/sources.list.d/nodesource.list
echo 'deb-src https://deb.nodesource.com/node_6.x yakkety main' >> /etc/apt/sources.list.d/nodesource.list

Running `apt-get update` for you...

apt-get update
Hit:1 http://za.archive.ubuntu.com/ubuntu yakkety InRelease
Hit:2 http://za.archive.ubuntu.com/ubuntu yakkety-updates InRelease
Hit:3 http://za.archive.ubuntu.com/ubuntu yakkety-backports InRelease
Hit:4 http://security.ubuntu.com/ubuntu yakkety-security InRelease
Hit:5 https://deb.nodesource.com/node_6.x yakkety InRelease
Reading package lists... Done

Run `apt-get install nodejs` (as root) to install Node.js v6.x and npm

Reading package lists... Done
Building dependency tree
Reading state information... Done
nodejs is already the newest version (6.9.4-1nodesource1~yakkety1).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 15245 100 15245 0 0 7949 0 0:00:01 0:00:01 --:--:-- 7948
Reading package lists... Done
Building dependency tree
Reading state information... Done
build-essential is already the newest version (12.1ubuntu2).
git is already the newest version (1:2.9.3-1).
libpng-dev is already the newest version (1.6.25-1).
python-minimal is already the newest version (2.7.11-2).
redis-server is already the newest version (2:3.2.1-1).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Cloning into 'xo-server'...
remote: Counting objects: 10478, done.
remote: Compressing objects: 100% (59/59), done.
remote: Total 10478 (delta 31), reused 0 (delta 0), pack-reused 10419
Receiving objects: 100% (10478/10478), 2.71 MiB | 1.11 MiB/s, done.
Resolving deltas: 100% (7503/7503), done.
Checking connectivity... done.
Cloning into 'xo-web'...
remote: Counting objects: 26050, done.
remote: Compressing objects: 100% (11/11), done.
error: RPC failed; curl 56 GnuTLS recv error (-54): Error in the pull function.
fatal: The remote end hung up unexpectedly
fatal: early EOF
fatal: index-pack failed
npm WARN prefer global [email protected] should be installed with -g
npm WARN prefer global [email protected] should be installed with -g
npm WARN prefer global [email protected] should be installed with -g
npm WARN prefer global [email protected] should be installed with -g

[email protected] install /opt/xo-server/node_modules/argon2
node-gyp rebuild

make: Entering directory '/opt/xo-server/node_modules/argon2/build'
CC(target) Release/obj.target/libargon2/argon2/src/opt.o
CC(target) Release/obj.target/libargon2/argon2/src/argon2.o
CC(target) Release/obj.target/libargon2/argon2/src/core.o
CC(target) Release/obj.target/libargon2/argon2/src/blake2/blake2b.o
CC(target) Release/obj.target/libargon2/argon2/src/thread.o
CC(target) Release/obj.target/libargon2/argon2/src/encoding.o
AR(target) Release/obj.target/argon2.a
COPY Release/argon2.a
CXX(target) Release/obj.target/argon2/src/argon2_node.o
SOLINK_MODULE(target) Release/obj.target/argon2.node
COPY Release/argon2.node
make: Leaving directory '/opt/xo-server/node_modules/argon2/build'

[email protected] install /opt/xo-server/node_modules/bcrypt
node-pre-gyp install --fallback-to-build

bash: line 13: 3533 Killed sudo npm install
bash: line 16: cd: /opt/xo-web: No such file or directory
node-pre-gyp ERR! Tried to download(404): https://github.com/kelektiv/node.bcrypt.js/releases/download/v1.0.2/bcrypt_lib-v1.0.2-node-v51-linux-x64.tar.gz
node-pre-gyp ERR! Pre-built binaries not found for [email protected] and [email protected] (node-v51 ABI) (falling back to source compile with node-gyp)
make: Entering directory '/opt/xo-server/node_modules/bcrypt/build'shing
CXX(target) Release/obj.target/bcrypt_lib/src/blowfish.o
CXX(target) Release/obj.target/bcrypt_lib/src/bcrypt.o
CXX(target) Release/obj.target/bcrypt_lib/src/bcrypt_node.osIntoIdealTree
SOLINK_MODULE(target) Release/obj.target/bcrypt_lib.nodeDepsIntoIdealTree
COPY Release/bcrypt_lib.node
COPY /opt/xo-server/node_modules/bcrypt/lib/binding/bcrypt_lib.node
TOUCH Release/obj.target/action_after_build.stamp
make: Leaving directory '/opt/xo-server/node_modules/bcrypt/build'
npm WARN prepublish-on-install As of npm@5, prepublish scripts will run only for npm publish.
npm WARN prepublish-on-install (In npm@4 and previous versions, it also runs for npm install.)
npm WARN prepublish-on-install See the deprecation note in npm help scripts for more information.
npm WARN lifecycle [email protected]~prepublish: cannot run in wd %s %s (wd=%s) [email protected] npm run build /opt/xo-server
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@^1.0.0 (node_modules/chokidar/node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for [email protected]: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"x64"})

[email protected] prebuild /opt/xo-server
index-modules src/api src/xapi/mixins src/xo-mixins

index generated src/api/index.js
index generated src/xo-mixins/index.js
index generated src/xapi/mixins/index.js

[email protected] build /opt/xo-server
gulp build --production

[15:34:46] Using gulpfile /opt/xo-server/gulpfile.js
[15:34:46] Starting 'build'...
[15:34:46] Starting 'clean'...
[15:34:46] Finished 'clean' after 8.5 ms
[15:34:46] Starting 'buildCoffee'...
[15:34:46] Starting 'buildEs6'...
[15:34:53] Finished 'buildCoffee' after 6.68 s
[15:35:33] Finished 'buildEs6' after 47 s
[15:35:33] Finished 'build' after 47 s
root@xenorc:/opt#

DustinB3403

Warning aren't critical.

Go to the ip address of this server and see if you have XO running.

The default login is [email protected] and admin as the password if i remember correctly.

brandon

@DustinB3403 Nope, Nothing see it never even ran npm install & rebuild in xo-web?

If I try to start npm I get this

root@xenorc:/opt# npm start
npm ERR! Linux 4.8.0-22-generic
npm ERR! argv "/usr/local/bin/node" "/usr/local/bin/npm" "start"
npm ERR! node v7.4.0
npm ERR! npm v4.0.5
npm ERR! path /opt/package.json
npm ERR! code ENOENT
npm ERR! errno -2
npm ERR! syscall open

npm ERR! enoent ENOENT: no such file or directory, open '/opt/package.json'
npm ERR! enoent ENOENT: no such file or directory, open '/opt/package.json'
npm ERR! enoent This is most likely not a problem with npm itself
npm ERR! enoent and is related to npm not being able to find a file.
npm ERR! enoent

npm ERR! Please include the following file with any support request:
npm ERR! /opt/npm-debug.log

travisdh1

@brandon Is xo-web installed directly in /opt? Looks like you might be trying to start it from the wrong place to me.

brandon

@travisdh1 Cant go to xo-web...

root@xenorc:/opt# ls
node_modules npm-debug.log xo-server

DustinB3403

@travisdh1 the installer script should create the directories and install into them without any user intervention.

@brandon are the folders xo-web and xo-server under /opt/ ?

brandon

@DustinB3403 No it didnt clone from git... Should we try to fix the Debian one since it is 90 % done?

travisdh1

@brandon said in Xen Orchestra on Ubuntu 15.10 - Complete installation instructions:

@travisdh1 Cant go to xo-web...

root@xenorc:/opt# ls
node_modules npm-debug.log xo-server

Ah, well, something didn't work right in the script then. You should have an xo-web directory as well.