4K vs UHD
-
@coliver Call me when you can emulate a Holodeck and I'll come visit.
-
-
Then I could hire Wil Wheaton to mop the holodeck
-
So we should get this topic back on track... Is it 4k, 2160p, 1080p, or 1080i, or less? lol.
-
$0.02
2160P = 3840x2160
4K = whatever the other one was, 4096xsomething?
-
@MattSpeller 4096 x 2160 as well, lol. Just to make it even more confusing!
-
@dafyre sigh
Thread TL;DR - some bastard marketing wanks have made things confusing that should be straight forward.
-
@MattSpeller said:
@dafyre sigh
Thread TL;DR - some bastard marketing wanks have made things confusing that should be straight forward.
Hence Scott's suggestion of dumping the names and just moving to pure resolution markers...
the problem with that.. the public will ask - uh.. are these different resolutions all compatible?
-
@Dashrender Well that depends on how the signal is encoded... What happens if you try to play a 4096x2160 video on a 1920 x 1080 TV? If it his hooked up to a PC, then the PC handles the scaling of the video to the right resolution...
The trick will be getting older TVs that understand say... 720p and give them the ability to downscale the video to their size... Some DVD players can Up / Downscale video nowdays... Getting it onto older TVs would be a bit tricker.
-
I see a huge potential problem in the coming months/years as there are more and more options. TVs will need to be flash updatable so they can be upgraded to support the ability to convert signals on the fly, or else we'll have people with tv sets that just aren't workable.
-
@Dashrender said:
I see a huge potential problem in the coming months/years as there are more and more options. TVs will need to be flash updatable so they can be upgraded to support the ability to convert signals on the fly, or else we'll have people with tv sets that just aren't workable.
I think it would be a good idea for TVs to be flashable, and many of the newere "smart" TVs are. However, I think it may make more sense to use set top boxes like folks do now for the HD Antennae, except instead of doing HDTV over the air, it will scale the video to fit the resolution of the TV it is connected to.
-
@Dashrender said:
I see a huge potential problem in the coming months/years as there are more and more options. TVs will need to be flash updatable so they can be upgraded to support the ability to convert signals on the fly, or else we'll have people with tv sets that just aren't workable.
Unlikely. all these encoders are hardware specific encoders for the type (ASIC) rather than generic Processing. It would also cut into their sales of newer TVs.
-
@Dashrender said:
....TVs will need to be flash updatable so they can be upgraded to support ....
Yesssss make them updatable... I can't think of anything evil I could possibly do with a wifi connected device with speakers and soon microphones in your livingroom....Excuse me I need to go find a hairless cat and some henchmen.
-
@dafyre said:
@Dashrender Well that depends on how the signal is encoded... What happens if you try to play a 4096x2160 video on a 1920 x 1080 TV? If it his hooked up to a PC, then the PC handles the scaling of the video to the right resolution...
Depends on If the TV supports higher res inputs or not.
-
@dafyre said:
@Dashrender said:
I see a huge potential problem in the coming months/years as there are more and more options. TVs will need to be flash updatable so they can be upgraded to support the ability to convert signals on the fly, or else we'll have people with tv sets that just aren't workable.
I think it would be a good idea for TVs to be flashable, and many of the newere "smart" TVs are. However, I think it may make more sense to use set top boxes like folks do now for the HD Antennae, except instead of doing HDTV over the air, it will scale the video to fit the resolution of the TV it is connected to.
It's not just scaling it's codecs too. OTA with UHD will be H.265 where is it's currently MPEG2. A Setup box will be required for OTA. I don't think will see many upgradable ones, not unless they were designed with something specific in mind but the specs where still loosely defined.
-
@thecreativeone91 said:
@dafyre said:
@Dashrender Well that depends on how the signal is encoded... What happens if you try to play a 4096x2160 video on a 1920 x 1080 TV? If it his hooked up to a PC, then the PC handles the scaling of the video to the right resolution...
Depends on If the TV supports higher res inputs or not.
In the case of hooking a PC up to the TV, the PC determines the TV's resolution and sets it appropriately, and the PC handles the decoding / displaying of the video.
-
@thecreativeone91 said:
It's not just scaling it's codecs too. OTA with UHD will be H.265 where is it's currently MPEG2. A Setup box will be required for OTA. I don't think will see many upgradable ones, not unless they were designed with something specific in mind but the specs where still loosely defined.
Good point... More and more, though, I see us going backwards a bit... back to requiring the STBs (Set Top Boxes) to handle the decoding / scaling of the video, and the TV just being a TV again.
-
@dafyre said:
In the case of hooking a PC up to the TV, the PC determines the TV's resolution and sets it appropriately, and the PC handles the decoding / displaying of the video.
Kinda. It's based on EDID. If the TV allows higher resolution than the panel actually is there's nothing stopping you from sending it a higher resolution. Nor is the native resolution necessarily the normal input resolution.
For example some early HDTVs had a panel resolution of 1366x768, yet they would default to 1280x720 for PC input.
This is really common on projectors having a native resolution of say 800x600, 1024x768 but making the default resolution 1366x768 or higher.
There's also some HDTVs (1920x1080) that will want a 1024x768 signal over the VGA/DVI ports for some reason. -
@thecreativeone91 said:
(snip)
There's also some HDTVs (1920x1080) that will want a 1024x768 signal over the VGA/DVI ports for some reason.Right. I wasn't thinking about the early HDTV's or projectors. But generally it doesn't matter what resolution is negotiated between the PC and the device... the PC is the one responsible for sending the video output and scaling it to the current resolution.
Edit: Sometimes it works well, and others, it totally sucks.
-
OMG! You just said "HDTV" and "1366x768" in the same sentence!?!?!?!
