Small Business Server 2003 to 2012 R2 Migration and Virtualized Domain Controller Questions
-
That picture didn't seem to upload.
-
Looks like picture didn't attach well...basically showing 25 minutes to copy just 82 meg from my PC to the drive on VM2, that will eventually be our main file server drive. In addition, task manager shows 89% memory usage (of the 4GB allocated and on dynamic)...about to reboot the VM2 and see what happens but this is scary.
-
@garak0410 look at the tcp offload settings. I am not at a place to look at the client where I had the same problem. but there is a setting in hyper-v manager that I had to change then reboot everything in order get get the network to perform correctly.
-
@garak0410 said:
Looks like picture didn't attach well...
image button uploads images to imgur. If you know the link you can edit the post to do it manually.
remove the extra whitespace I added to make it show
! [image.jpg] ( http : //domain.com/image.jpg ) -
@JaredBusch said:
@garak0410 look at the tcp offload settings. I am not at a place to look at the client where I had the same problem. but there is a setting in hyper-v manager that I had to change then reboot everything in order get get the network to perform correctly.
So I should turn off the TCP Checksum offload for IPv4 on both virtual adapters?
-
@scottalanmiller said:
This is where installing to USB is recommended. Just have a spare USB copy laying around.
Except you cannot install Server 2012 + Hyper-V to a USB.
-
@garak0410 said:
@JaredBusch said:
@garak0410 look at the tcp offload settings. I am not at a place to look at the client where I had the same problem. but there is a setting in hyper-v manager that I had to change then reboot everything in order get get the network to perform correctly.
So I should turn off the TCP Checksum offload for IPv4 on both virtual adapters?
Just logged into that server. It was VMQ that I had to disable. I think it was on by default and I never checked if it was supported or not. The users were screaming down my back so I just disabled it.
-
@JaredBusch said:
@garak0410 said:
@JaredBusch said:
@garak0410 look at the tcp offload settings. I am not at a place to look at the client where I had the same problem. but there is a setting in hyper-v manager that I had to change then reboot everything in order get get the network to perform correctly.
So I should turn off the TCP Checksum offload for IPv4 on both virtual adapters?
Just logged into that server. It was VMQ that I had to disable. I think it was on by default and I never checked if it was supported or not. The users were screaming down my back so I just disabled it.
OK I'll check that because turning off TCP Checksum offload for IPv4 has no effect and was even show to delete files from that drive...took 3 minutes to delete 10 meg...
-
@garak0410 said:
@JaredBusch said:
@garak0410 said:
@JaredBusch said:
@garak0410 look at the tcp offload settings. I am not at a place to look at the client where I had the same problem. but there is a setting in hyper-v manager that I had to change then reboot everything in order get get the network to perform correctly.
So I should turn off the TCP Checksum offload for IPv4 on both virtual adapters?
Just logged into that server. It was VMQ that I had to disable. I think it was on by default and I never checked if it was supported or not. The users were screaming down my back so I just disabled it.
OK I'll check that because turning off TCP Checksum offload for IPv4 has no effect and was even show to delete files from that drive...took 3 minutes to delete 10 meg...
Is turning off VMQ a command line or a GUI option? Not seeing it.
-
@JaredBusch said:
@scottalanmiller said:
This is where installing to USB is recommended. Just have a spare USB copy laying around.
Except you cannot install Server 2012 + Hyper-V to a USB.
Are you sure? Microsoft just recommended that two weeks ago on SW.
-
@scottalanmiller said:
@JaredBusch said:
@scottalanmiller said:
This is where installing to USB is recommended. Just have a spare USB copy laying around.
Except you cannot install Server 2012 + Hyper-V to a USB.
Are you sure? Microsoft just recommended that two weeks ago on SW.
Well, something is causing extreme slowness just copying a file from my PC to the drive on my VM2 (services01). Horrendous. Is it network or VDISK related? I have a week now but got to get this resolved right away.
-
Honestly just install ESXi or XenServer. They aren't all weird and picky like HyperV.
-
@scottalanmiller said:
Honestly just install ESXi or XenServer. They aren't all weird and picky like HyperV.
You may be right...and may be crazy! LOL...I had a network engineer tell me last night to just say physical in my environment...love the varied opinions I get.
-
A network engineer isn't a discipline that would know anything about this nor understand the ramifications.
-
HyperV is the hardest to use and biggest learning curve. Install XenServer and see if that just fixes everything for you.
-
@scottalanmiller said:
A network engineer isn't a discipline that would know anything about this nor understand the ramifications.
OH, I know...just enjoyed his perspective. At least I don't have to pull his long hours and sometimes crazy on-call schedules.
-
@garak0410 said:
@scottalanmiller said:
@JaredBusch said:
@scottalanmiller said:
This is where installing to USB is recommended. Just have a spare USB copy laying around.
Except you cannot install Server 2012 + Hyper-V to a USB.
Are you sure? Microsoft just recommended that two weeks ago on SW.
Well, something is causing extreme slowness just copying a file from my PC to the drive on my VM2 (services01). Horrendous. Is it network or VDISK related? I have a week now but got to get this resolved right away.
I did turn off VMQ on the Physical Adapters and bam! Normal Speeds!
In fact, then testing one of our apps, making it's work directory a folder on the VM, I got a 3 second increase compared to physical drives on our current server and the hypervisor...finally, some success! LOL -
@scottalanmiller said:
@JaredBusch said:
@scottalanmiller said:
This is where installing to USB is recommended. Just have a spare USB copy laying around.
Except you cannot install Server 2012 + Hyper-V to a USB.
Are you sure? Microsoft just recommended that two weeks ago on SW.
When I rolled out a server in November, yes this was the case. I have not read up about any changes as I have no Hyper-V installs pending. I will state, that I did attempt to install to the built in RAID1 SD in the Dell server then and that failed. That led to my searching which stated that it was not possible except for a limited OEM version that was not published.
-
@garak0410 said:
@garak0410 said:
@scottalanmiller said:
@JaredBusch said:
@scottalanmiller said:
This is where installing to USB is recommended. Just have a spare USB copy laying around.
Except you cannot install Server 2012 + Hyper-V to a USB.
Are you sure? Microsoft just recommended that two weeks ago on SW.
Well, something is causing extreme slowness just copying a file from my PC to the drive on my VM2 (services01). Horrendous. Is it network or VDISK related? I have a week now but got to get this resolved right away.
I did turn off VMQ on the Physical Adapters and bam! Normal Speeds!
In fact, then testing one of our apps, making it's work directory a folder on the VM, I got a 3 second increase compared to physical drives on our current server and the hypervisor...finally, some success! LOLOh good Whoo hoo. HyperV should perform extremely well. Windows is built to run on it.
-
Okay. So now for backups.
In what way is Unitrends appearing to not be the right solution? What is it lacking in the free version?
