Headless Raspberry Pi 4



  • Got a new Raspberry Pi 4 with 4GB RAM and thought I'd give it a spin. Unfortunately the new model has micro hdmi outputs and that I don't have. So had to research how to get it up and running without any monitor which isn't too difficult.

    DOWNLOAD IMAGE
    Go to https://www.raspberrypi.org/downloads/raspbian/
    Here I'm going with Raspbian Buster Lite which is a Debian 10 minimal install for the RPi - more or less.

    BURN IMAGE
    Burn the image to a microSD card with your favorite tool. I used etcher. https://www.balena.io/etcher/

    MAKE SSH START
    After having burned the image to the microSD card, mount the card and add an empty file called ssh in the root directory. This will make Raspian start the ssh service on boot up.

    BOOT UP
    Put the microSD card in the RPi, a network cable and boot it up. Boot will take about 20 seconds and it will automatically resize the partition to the full size of your microSD card. Network setup is with dhcp.

    SSH
    After you find the ip address of the RPi ssh login is:
    user: pi
    password: raspberry

    CONFIGURATION
    For some configuration options run:
    sudo raspi-config

    Also to update the repository do
    sudo apt update
    And if need be upgrade any packages to newer versions:
    sudo apt upgrade



  • @Pete-S They dropped the full size hdmi. . . boo.



  • It's running kernel 4.19.
    Dmesg shows that boot takes about 12 seconds.

    It's using EXT4.

    Model: SD SC16G (sd/mmc)
    Disk /dev/mmcblk0: 15.9GB
    Sector size (logical/physical): 512B/512B
    Partition Table: msdos
    Disk Flags:
    
    Number  Start   End     Size    Type     File system  Flags
     1      4194kB  273MB   268MB   primary  fat32        lba
     2      277MB   15.9GB  15.7GB  primary  ext4
    

    With a 16GB card:

    [email protected]:~# df -h
    Filesystem      Size  Used Avail Use% Mounted on
    /dev/root        15G  1.2G   13G   9% /
    devtmpfs        1.8G     0  1.8G   0% /dev
    tmpfs           2.0G     0  2.0G   0% /dev/shm
    tmpfs           2.0G  8.4M  1.9G   1% /run
    tmpfs           5.0M  4.0K  5.0M   1% /run/lock
    tmpfs           2.0G     0  2.0G   0% /sys/fs/cgroup
    /dev/mmcblk0p1  253M   40M  213M  16% /boot
    tmpfs           391M     0  391M   0% /run/user/1000
    

    Memory used:

    [email protected]:~# free
                  total        used        free      shared  buff/cache   available
    Mem:        3999792       91920     3826840        8584       81032     3788900
    Swap:        102396           0      102396
    


  • @DustinB3403 said in Headless Raspberry Pi 4:

    @Pete-S They dropped the full size hdmi. . . boo.

    I agree!



  • iperf with RPi as server

    [email protected]:~# iperf -s
    ------------------------------------------------------------
    Server listening on TCP port 5001
    TCP window size: 85.3 KByte (default)
    ------------------------------------------------------------
    [  4] local xxx.xxx.xxx.xxx port 5001 connected with xxx.xxx.xxx.xxx port 57083
    [ ID] Interval       Transfer     Bandwidth
    [  4]  0.0-10.0 sec   901 MBytes   754 Mbits/sec
    

    iperf with RPi as client

    [email protected]:~# iperf -c xxx.xxx.xxx.xxx
    ------------------------------------------------------------
    Client connecting to xxx.xxx.xxx.xxx, TCP port 5001
    TCP window size:  149 KByte (default)
    ------------------------------------------------------------
    [  3] local xxx.xxx.xxx.xxx port 48180 connected with xxx.xxx.xxx.xxx port 5001
    [ ID] Interval       Transfer     Bandwidth
    [  3]  0.0-10.0 sec   972 MBytes   815 Mbits/sec
    


  • This version 4 feels snappy, like you are running on a "real" computer.
    But storage speed is more like an old harddrive compared to a modern server with SSD drives. To bad they didn't put a SATA or something on it.

    Serving up some pages on apache or nginx is no problem. Ansible installs fine. Packages in Raspbian seems to be just about the entire Debian repository for whatever odd thing you want.

    It's for sure the best Raspberry Pi so far. Can be used for a lot more things than the old version 3.


Log in to reply