I have this problem with the Dlink DVX-8000 IPPBX
-
am using cross cable
OW O GW B BW G MW M - this is the cable type am using. -
Any one suggest any IP scanner that can find any IP
-
@sadiq said in I have this problem with the Dlink DVX-8000 IPPBX:
Any one suggest any IP scanner that can find any IP
You need to set your laptop to use the same scope that this device is configured with.
What operating system is your laptop installed with, something in the Windows 10 family?
-
The laptop IP setting is same match for the 192.168.100.3
-
Win 7 am using
-
@sadiq said in I have this problem with the Dlink DVX-8000 IPPBX:
The laptop IP setting is same match for the 192.168.100.3
OK so open up a command prompt and attempt to ping the device at 192.168.100.100
If it doesn't respond either ICMP is disabled or it isn't using that address.
-
@sadiq said in I have this problem with the Dlink DVX-8000 IPPBX:
Any one suggest any IP scanner that can find any IP
AngryIP. It's free and works really well.
-
it is not pinging
-
@sadiq said in I have this problem with the Dlink DVX-8000 IPPBX:
it is not pinging
The device may not be working. These are not very reliable pieces of hardware.
-
@scottalanmiller Angry IP range i gave 192.168.100.1 192.168.100.255
No IP find
-
@sadiq said in I have this problem with the Dlink DVX-8000 IPPBX:
@scottalanmiller Angry IP range i gave 192.168.100.1 192.168.100.255
No IP find
You have both connected to the switch still, right? With cables that you know work otherwise?
-
Even I try to use Putty - ssl - to open the 192.168.100.100 - It is not going inside
-
Am trying the PBX directly with my laptop and trying with switch also
The same result -
@sadiq said in I have this problem with the Dlink DVX-8000 IPPBX:
Even I try to use Putty - ssl - to open the 192.168.100.100 - It is not going inside
If you can't ping it, PuTTY isn't going to work. No need to try that.
-
@sadiq open a command prompt and show us the result of running:
ipconfig /all -
@sadiq said in I have this problem with the Dlink DVX-8000 IPPBX:
Am trying the PBX directly with my laptop and trying with switch also
The same resultSounds like the unit is not working.
-
Is there a console port on the back? Might be easiest to connect to that and figure out what the IP address is.
I couldn't find anything about the DVX-8000, but here is a manual for a DVX-1000.
ftp://ftp2.dlink.com/PRODUCTS/DVX-1000/REVA/DVX-1000_MANUAL_1.01_EN.PDF
