Hyper-V Was working, now it isnt
-
No matter what I do I keep getting the same issue. When trying to connect from my management server to the headless HOST I get the following.
This is the Host Machine.
This is the management machine which is a VM.
I keep going around in circles from everything I have googled. I did enable a virtual nic card which knocked me out and then i could not connect anymore. I was able to remove the vitual interface which caused the box to go back to the physical NIC. I reestablished connectivity to the box and can RDP into it. I can ping each box from one to the other. This tells me I am back on the network and everything is talking except I keep getting the WinRM cannot complete the operation. I am fully prepared to take the lumps due if it is something simple like "have you rebooted". (I have) I have really tried to get this one figured out but lack of experience is eating my lunch. Any pointers would greatly be appreciated.
Manager pinging host:
Host pinging Manager:
Apologies if this format is bad. Pointers on that would be good too. Thank you.
-
Have you attempted to connect to this server using it's IP address rather than its FQDN?
-
Also have you confirmed the settings in the firewall.
-
@dustinb3403 said in Hyper-V Was working, now it isnt:
Have you attempted to connect to this server using it's IP address rather than its FQDN?
Different error:
-
@dustinb3403 working on that now.
-
Based on the above information and the error code I called out, I'd take a look at the firewall settings and see if there is something off there.
IE: Due to what the error is saying, you aren't being allowed access purely due to being on a different sub
-
@dustinb3403 said in Hyper-V Was working, now it isnt:
Based on the above information and the error code I called out, I'd take a look at the firewall settings and see if there is something off there.
IE: Due to what the error is saying, you aren't being allowed access purely due to being on a different sub
Thats a great point. They are, on different subnets. Gotta get better at reading the error message. Thanks man!! Will follow up if i get is working.
-
@popester I hope it works out.
Keep us informed.
-
I have a domain joined Hyper-V setup that the Win 10 desktop running Hyper-V manager has to have the firewall turned off to connect.
No issues on the Hyper-V Server 2012 R2 side.
Have not had time to troubleshoot yet. Just discovered it the other weekend when I was on site at a client.
-
@jaredbusch Are the server and workstation on the same subnet?
-
@dustinb3403 said in Hyper-V Was working, now it isnt:
@jaredbusch Are the server and workstation on the same subnet?
In my case? Yes. Both domain joined also. Issue started within the last month or so.
-
@jaredbusch So likely not the same issue.
-
Another tech I know found that he could not manage non domain joined Hyper-V hosts from a different subnet. Not sure he ever got around that issue.
-
I ended up starting over from bare metal. Second attempt was A LOT better. Thank you everyone for all of your help.
