RAID 5 URE Clarity Question
-
@tim_g said in RAID 5 URE Clarity Question:
I still don't understand. The only thing a hard drive can read, is the data on itself. A 1TB hard drive can only hold 1 TB of possible data. If I have 6x 1TB drives in a RAID 5, and a drive dies, how/why would another single drive read more than 1 TB of data?
Each drive has to read 1TB. There are five drives. That's 5x 1TB. So 5TB of data in that example. URE rate is once ever 12TB of reads. That's nearly 50% of 12TB.
-
@tim_g said in RAID 5 URE Clarity Question:
When a drive is being rebuilt, the 1TB of data on a working drive is only read once isn't it?... to help rebuild the data that should be on the new drive being rebuilt... Maybe this is where my thinking is wrong.
1TB is being written, and then read. But if a URE occurs during the write/read portion, it can be corrected as we have the source data for that moment. So this is not a risk.
It's the 5TB that have to be read to restore that data that is where the risk is, not in the 1TB of writing.
-
That's why we refer to the 5TB size, in that example, as the risk domain. The parity overhead is not within the risk domain, nor is the "read back" from immediate write because that is protected by a redundant in-memory block. Only the exposed, remaining 5TB is at risk. But all of the data that you need is in that 5TB.
-
@scottalanmiller said in RAID 5 URE Clarity Question:
@tim_g said in RAID 5 URE Clarity Question:
I still don't understand. The only thing a hard drive can read, is the data on itself. A 1TB hard drive can only hold 1 TB of possible data. If I have 6x 1TB drives in a RAID 5, and a drive dies, how/why would another single drive read more than 1 TB of data?
Each drive has to read 1TB. There are five drives. That's 5x 1TB. So 5TB of data in that example. URE rate is once ever 12TB of reads. That's nearly 50% of 12TB.
You said the URE of a single drive is 12TB... or did you mean of a 12TB RAID 5 array as a whole, regardless of drive size and quantity?
-
@tim_g said in RAID 5 URE Clarity Question:
@scottalanmiller said in RAID 5 URE Clarity Question:
@tim_g said in RAID 5 URE Clarity Question:
I still don't understand. The only thing a hard drive can read, is the data on itself. A 1TB hard drive can only hold 1 TB of possible data. If I have 6x 1TB drives in a RAID 5, and a drive dies, how/why would another single drive read more than 1 TB of data?
Each drive has to read 1TB. There are five drives. That's 5x 1TB. So 5TB of data in that example. URE rate is once ever 12TB of reads. That's nearly 50% of 12TB.
You said the URE of a single drive is 12TB... or did you mean of a 12TB RAID 5 array as a whole, regardless of drive size and quantity?
URE rate is 12TB (10^14.) A rate is the same for a drive or an array. Because it is a rate. But the rate is based on the drives that you buy, because that's what sets the failure rate. Obviously it is physical drives that fail, so it is the quality of the drives you select that determine the rate of the UREs. But UREs are at risk on all of the drives, and they all have to be read, so the risk is cumulative.
-
@tim_g said in RAID 5 URE Clarity Question:
...or did you mean of a 12TB RAID 5 array as a whole, regardless of drive size and quantity?
A URE rate is the same regardless of what you are looking at. So both.
It's like your shoes fail, on average, every 100 miles that you walk. If you want 100 miles in one mile a day increments, or a 100 miles all at once, doesn't change the rate. On average, at 100 miles, your shoes will fail regardless of how you segment the increments under the hood.
-
Okay, let's use 6x 2TB drives to avoid confusion, and so the RAID 5 array = 12TB to match your math of a 12 TB RAID 5 being near a 100% to experience a URE.
Let's say drive E needs to be rebuilt.
You said each drive has a URE of 10^14.
How much data that matters needs to be read from drive D in order to help rebuild drive E? I would think a maximum of 400GB needs to be read from drive D. The data that was on drive E, is spread throughout the other 5 drives. So there is ~400GB of data on drive D that needs to be read so it can help rebuild the data that was on drive E. And each other drive will do the same thing.
Being that drive Ds URE is 10^14, which you said comes out to equal about 12TB of reads, I would think that a chance of a URE happening on drive D would be 3%. So isn't drive D only needed for the 400GB it contains of drive E to help rebuild it? That's 3% of the drives URE rate.
-
@tim_g said in RAID 5 URE Clarity Question:
How much data that matters needs to be read from drive D in order to help rebuild drive E?
That you are asking this means you don't understand the issue. URE is a rate of failure. That alone, I think, should explain everything.
Or to state in another way, 400% of D has to be read to rebuild E.
-
@tim_g said in RAID 5 URE Clarity Question:
I would think a maximum of 400GB needs to be read from drive A.
No, 2TB from EACH drive. Every drive has to be read 100% to recreate the data with all parity is lost. With RAID 6 it is more complex to explain if only one drive has failed, but the 400% number remains the same, it is just split over five drives instead of four. But the URE rate never changes. But only when two drives are lost do you have URE exposure.
So the only scenario that matters is 400% of one drive for 8TB of risk domain.
-
@tim_g said in RAID 5 URE Clarity Question:
So isn't drive D only needed for the 400GB it contains of drive E to help rebuild it?
No, D doesn't contain ANYTHING of drive E. That's likely the root of confusion. At no point in parity RAID does any drive contain the contents of any other drive. That's mirroring, and mirroring doesn't have this risk at all.
-
I wanted to change drive D to drive A so they don't get confused... but changed it back.... for anyone else wondering.
-
@scottalanmiller said in RAID 5 URE Clarity Question:
@tim_g said in RAID 5 URE Clarity Question:
So isn't drive D only needed for the 400GB it contains of drive E to help rebuild it?
No, D doesn't contain ANYTHING of drive E. That's likely the root of confusion. At no point in parity RAID does any drive contain the contents of any other drive. That's mirroring, and mirroring doesn't have this risk at all.
That's not how I mean it... it contains 400GB of parity data that is used to help reconstruct the data in drive E, doesn't it?
-
But not matter what, there's a good 400GB of crap on drive D that is needed to help rebuild the data that was on drive E...
-
@tim_g said in RAID 5 URE Clarity Question:
@scottalanmiller said in RAID 5 URE Clarity Question:
@tim_g said in RAID 5 URE Clarity Question:
So isn't drive D only needed for the 400GB it contains of drive E to help rebuild it?
No, D doesn't contain ANYTHING of drive E. That's likely the root of confusion. At no point in parity RAID does any drive contain the contents of any other drive. That's mirroring, and mirroring doesn't have this risk at all.
That's not how I mean it... it contains 400GB of parity data that is used to help reconstruct the data in drive E, doesn't it?
No, it contains 2TB of parity data, every block of which is necessary for reconstructing the lost drive(s).
-
@scottalanmiller said in RAID 5 URE Clarity Question:
@tim_g said in RAID 5 URE Clarity Question:
@scottalanmiller said in RAID 5 URE Clarity Question:
@tim_g said in RAID 5 URE Clarity Question:
So isn't drive D only needed for the 400GB it contains of drive E to help rebuild it?
No, D doesn't contain ANYTHING of drive E. That's likely the root of confusion. At no point in parity RAID does any drive contain the contents of any other drive. That's mirroring, and mirroring doesn't have this risk at all.
That's not how I mean it... it contains 400GB of parity data that is used to help reconstruct the data in drive E, doesn't it?
No, it contains 2TB of parity data, every block of which is necessary for reconstructing the lost drive(s).
Oh I see... I had it wrong the whole time.
-
@tim_g said in RAID 5 URE Clarity Question:
But not matter what, there's a good 400GB of crap on drive D that is needed to help rebuild the data that was on drive E...
No, parity RAID is like a single file, when it corrupts, it is lost. Doesn't matter how many good blocks there are.
-
@scottalanmiller said in RAID 5 URE Clarity Question:
@tim_g said in RAID 5 URE Clarity Question:
But not matter what, there's a good 400GB of crap on drive D that is needed to help rebuild the data that was on drive E...
No, parity RAID is like a single file, when it corrupts, it is lost. Doesn't matter how many good blocks there are.
So then it means the entire 2TB of EVERY drive needs to be READ to reconstruct the 2TB that was on the bad drive.
-
@tim_g said in RAID 5 URE Clarity Question:
@scottalanmiller said in RAID 5 URE Clarity Question:
@tim_g said in RAID 5 URE Clarity Question:
@scottalanmiller said in RAID 5 URE Clarity Question:
@tim_g said in RAID 5 URE Clarity Question:
So isn't drive D only needed for the 400GB it contains of drive E to help rebuild it?
No, D doesn't contain ANYTHING of drive E. That's likely the root of confusion. At no point in parity RAID does any drive contain the contents of any other drive. That's mirroring, and mirroring doesn't have this risk at all.
That's not how I mean it... it contains 400GB of parity data that is used to help reconstruct the data in drive E, doesn't it?
No, it contains 2TB of parity data, every block of which is necessary for reconstructing the lost drive(s).
Oh I see... I had it wrong the whole time.
I figured that out
So it is 2TB, from every working drive in the array (4), for 8TB total. Which gives us somewhere around a 60% chance of hitting a URE. That's because 12T is an average, not a guarantee. If it was exactly every 12TB, it would be 67% chance of loss. -
@tim_g said in RAID 5 URE Clarity Question:
@scottalanmiller said in RAID 5 URE Clarity Question:
@tim_g said in RAID 5 URE Clarity Question:
But not matter what, there's a good 400GB of crap on drive D that is needed to help rebuild the data that was on drive E...
No, parity RAID is like a single file, when it corrupts, it is lost. Doesn't matter how many good blocks there are.
So then it means the entire 2TB of EVERY drive needs to be READ to reconstruct the 2TB that was on the bad drive.
Correct
-
@scottalanmiller said in RAID 5 URE Clarity Question:
So it is 2TB, from every working drive in the array (4), for 8TB total,
to avoid confusion, do you mean (5), for 10TB total? Because there's 6 total, one went bad, 5 working ones left?
