Meraki Replacement Plan
-
@ubiquiti-user while I highly suspect the ERL could handle the workload, I would get the ER8 for a site with 100+ users.
-
@jaredbusch said in Meraki Replacement Plan:
@ubiquiti-user while I highly suspect the ERL could handle the workload, I would get the ER8 for a site with 100+ users.
Not the infinity to have a full 10gbe backbone (as well as to avoid having to daisy chain the switches)?
-
@ubiquiti-user said in Meraki Replacement Plan:
@jaredbusch said in Meraki Replacement Plan:
@ubiquiti-user while I highly suspect the ERL could handle the workload, I would get the ER8 for a site with 100+ users.
Not the infinity to have a full 10gbe backbone (as well as to avoid having to daisy chain the switches)?
You are buying a router, you really only need 1 LAN port. I recommend the ER8 only because I see the ERL and ERPoE in heavy use scenarios with 50-100 users pushing 50% CPU or more. But these are burst environments, not all day use.
The ER8 would give you more processing power. If you want SFP, the ERPro is the ER8 + SFP.
If you think you need 10GB, then sure, the Infinity is a nice looking unit, but I do not believe it is out yet.
-
@ubiquiti-user said in Meraki Replacement Plan:
(as well as to avoid having to daisy chain the switches)
You always have to have one switch be the one connected to the router. That is why it is a router and not a switch.
After that, you trunk your switches.
-
@jaredbusch hrm...
I was thinking 10bge would be nice for future proofing (as much as I know you shouldn't build for what you may or may not need).
The backbone and servers we're looking at could use the 10gbe . .
-
@ubiquiti-user said in Meraki Replacement Plan:
@jaredbusch hrm...
I was thinking 10bge would be nice for future proofing (as much as I know you shouldn't build for what you may or may not need).
The backbone and servers we're looking at could use the 10gbe . .
This is switch level not your router. You need 10gbe switching not routing.
-
@jaredbusch Right, getting items confused.
Ignore me.
-
@ubiquiti-user said in Meraki Replacement Plan:
@jaredbusch Right, getting items confused.
Ignore me.
I only flat ignore one use on here (so far). The rest I help or mock as appropriate.
-
Offline I recommended this to aggregate switching, if 10Gbe was something that was desired/required in this instance. I believe it is only ~500$.
https://www.ubnt.com/edgemax/edgeswitch-16-xg/
The diagram on that page would be what you'd be looking for specifically.
-
@coliver said in Meraki Replacement Plan:
Offline I recommended this to aggregate switching, if 10Gbe was something that was desired/required in this instance. I believe it is only ~500$.
https://www.ubnt.com/edgemax/edgeswitch-16-xg/
The diagram on that page would be what you'd be looking for specifically.
exactly this.
-
@jaredbusch said in Meraki Replacement Plan:
@coliver said in Meraki Replacement Plan:
Offline I recommended this to aggregate switching, if 10Gbe was something that was desired/required in this instance. I believe it is only ~500$.
https://www.ubnt.com/edgemax/edgeswitch-16-xg/
The diagram on that page would be what you'd be looking for specifically.
exactly this.
So get the edgerouter pro, the the edge switch (full sfp) and then gbe edge switches from there for the endpoints. Right?
-
@ubiquiti-user said in Meraki Replacement Plan:
Currently I have a lot of Cisco Meraki equipment with several years left on the licensing so while I can't replace it today, just doesn't make sense,
I've not read the loads of replies, but how does having the licensing still cause it to not make sense to replace? That's a sunk cost that you just have to ignore and go on with normal evaluations. It would be pretty easy for replacing it to end up cheaper than keeping it, even when it is already paid in advance. Not always, but pretty commonly.
-
@scottalanmiller said in Meraki Replacement Plan:
@ubiquiti-user said in Meraki Replacement Plan:
Currently I have a lot of Cisco Meraki equipment with several years left on the licensing so while I can't replace it today, just doesn't make sense,
I've not read the loads of replies, but how does having the licensing still cause it to not make sense to replace? That's a sunk cost that you just have to ignore and go on with normal evaluations. It would be pretty easy for replacing it to end up cheaper than keeping it, even when it is already paid in advance. Not always, but pretty commonly.
Because we don't have any continued cost of licensing, unless we wanted to add AP's or hardware. So, while it was expensive, it was a one time cost for the term of the license, which still has several years left.
-
Would you guys opt for an onsite controller or a hosted one on vultr for $6/month?
-
Now @scottalanmiller this doesn't mean we wouldn't add new AP's of ubiquiti's in place of any AP requirements we might have.
But doing a complete gut, just doesn't make sense. (I totally understand the sunk-cost fallacy).
-
@jaredbusch said in Meraki Replacement Plan:
@ubiquiti-user while I highly suspect the ERL could handle the workload, I would get the ER8 for a site with 100+ users.
And once you factor in not needing a rack mount, it's not as expensive as it might be.
-
@ubiquiti-user said in Meraki Replacement Plan:
Would you guys opt for an onsite controller or a hosted one on vultr for $6/month?
If you ONLY have one site, go on site. If you have more than one, probably go with Vultr.
-
@scottalanmiller said in Meraki Replacement Plan:
@ubiquiti-user said in Meraki Replacement Plan:
Would you guys opt for an onsite controller or a hosted one on vultr for $6/month?
If you ONLY have one site, go on site. If you have more than one, probably go with Vultr.
It is trivial to move later.
-
@scottalanmiller said in Meraki Replacement Plan:
@ubiquiti-user said in Meraki Replacement Plan:
Would you guys opt for an onsite controller or a hosted one on vultr for $6/month?
If you ONLY have one site, go on site. If you have more than one, probably go with Vultr.
One site in one building, but there are a few walls in the way. . .
-
The physical device would be the USG, correct?
