Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD
-
How about the physical port on the switch? change where the VM host is plugged in, test, then change the PC and test.
-
@dafyre said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
Also check that VMQ is disabled on your NICS.
Check out the Disable-NetAdapterVMQ powershell commands.
So much this. Check all pieces. The above command can disable it on the host, but the guest also has a setting that should be disabled.
-
@JaredBusch said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
Disable-NetAdapterVMQ
Yeah I was aware of the VMQ issues so that was disabled.
Once the office had closed for the day and after an hour of toying with everything I could find, I decided to completely uninstall the network drivers and reinstall from scratch. Deleted the vswitch and recreated it. Also uninstalled network drivers from workstation and reinstalled. Rebooted everything including the switch and it looks like everything is back to normal...for now. Not sure why this changed anything since none of the settings have changed. Just bizarre.
Thanks for your help everyone.
-
@NashBrydges said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
@JaredBusch said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
Disable-NetAdapterVMQ
Yeah I was aware of the VMQ issues so that was disabled.
Once the office had closed for the day and after an hour of toying with everything I could find, I decided to completely uninstall the network drivers and reinstall from scratch. Deleted the vswitch and recreated it. Also uninstalled network drivers from workstation and reinstalled. Rebooted everything including the switch and it looks like everything is back to normal...for now. Not sure why this changed anything since none of the settings have changed. Just bizarre.
Thanks for your help everyone.
You do not want to disable VMQ on 10Gb NICs. That's what it is meant for. The issue was that VMQ was being enabled by default for 1Gb adapters, and that was causing the problems.
-
@Tim_G said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
@NashBrydges said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
@JaredBusch said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
Disable-NetAdapterVMQ
Yeah I was aware of the VMQ issues so that was disabled.
Once the office had closed for the day and after an hour of toying with everything I could find, I decided to completely uninstall the network drivers and reinstall from scratch. Deleted the vswitch and recreated it. Also uninstalled network drivers from workstation and reinstalled. Rebooted everything including the switch and it looks like everything is back to normal...for now. Not sure why this changed anything since none of the settings have changed. Just bizarre.
Thanks for your help everyone.
You do not want to disable VMQ on 10Gb NICs. That's what it is meant for. The issue was that VMQ was being enabled by default for 1Gb adapters, and that was causing the problems.
You disable VMQ on anything that is Intel or Broadcomm period. Their drivers are seriously bugged for that. I've got 4 Server 2012 R2 bare metal machines with Intel and Broadcomm 10 gig NICs in them. Network performance absolutely sucks until I disable VMQ.
-
@dafyre said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
@Tim_G said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
@NashBrydges said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
@JaredBusch said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
Disable-NetAdapterVMQ
Yeah I was aware of the VMQ issues so that was disabled.
Once the office had closed for the day and after an hour of toying with everything I could find, I decided to completely uninstall the network drivers and reinstall from scratch. Deleted the vswitch and recreated it. Also uninstalled network drivers from workstation and reinstalled. Rebooted everything including the switch and it looks like everything is back to normal...for now. Not sure why this changed anything since none of the settings have changed. Just bizarre.
Thanks for your help everyone.
You do not want to disable VMQ on 10Gb NICs. That's what it is meant for. The issue was that VMQ was being enabled by default for 1Gb adapters, and that was causing the problems.
You disable VMQ on anything that is Intel or Broadcomm period. Their drivers are seriously bugged for that. I've got 4 Server 2012 R2 bare metal machines with Intel and Broadcomm 10 gig NICs in them. Network performance absolutely sucks until I disable VMQ.
Up to date firmware on the NICs?
My experience has been the opposite, as well as my research on the subject.
VMQ on 10Gb NICs is fine, that's what it was designed for. VMQ on 1Gb NICs is not fine.
When I disable VMQ on a busy 10Gb NIC on a Hyper-V host, performance goes down.
-
@Tim_G said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
@dafyre said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
@Tim_G said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
@NashBrydges said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
@JaredBusch said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
Disable-NetAdapterVMQ
Yeah I was aware of the VMQ issues so that was disabled.
Once the office had closed for the day and after an hour of toying with everything I could find, I decided to completely uninstall the network drivers and reinstall from scratch. Deleted the vswitch and recreated it. Also uninstalled network drivers from workstation and reinstalled. Rebooted everything including the switch and it looks like everything is back to normal...for now. Not sure why this changed anything since none of the settings have changed. Just bizarre.
Thanks for your help everyone.
You do not want to disable VMQ on 10Gb NICs. That's what it is meant for. The issue was that VMQ was being enabled by default for 1Gb adapters, and that was causing the problems.
You disable VMQ on anything that is Intel or Broadcomm period. Their drivers are seriously bugged for that. I've got 4 Server 2012 R2 bare metal machines with Intel and Broadcomm 10 gig NICs in them. Network performance absolutely sucks until I disable VMQ.
Up to date firmware on the NICs?
My experience has been the opposite, as well as my research on the subject.
VMQ on 10Gb NICs is fine, that's what it was designed for. VMQ on 1Gb NICs is not fine.
When I disable VMQ on a busy 10Gb NIC on a Hyper-V host, performance goes down.
Yepp. Firmware is up to date (did an update about 2 months ago, I think). The systems have been operational for a year or better.
It's all Cisco gear on the networking side. I've read the same thing that you have that says 10gig is fine to enable VMQ, but on Intel & Broadcomm NICs, it is not.
-
@dafyre said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
@Tim_G said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
@dafyre said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
@Tim_G said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
@NashBrydges said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
@JaredBusch said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
Disable-NetAdapterVMQ
Yeah I was aware of the VMQ issues so that was disabled.
Once the office had closed for the day and after an hour of toying with everything I could find, I decided to completely uninstall the network drivers and reinstall from scratch. Deleted the vswitch and recreated it. Also uninstalled network drivers from workstation and reinstalled. Rebooted everything including the switch and it looks like everything is back to normal...for now. Not sure why this changed anything since none of the settings have changed. Just bizarre.
Thanks for your help everyone.
You do not want to disable VMQ on 10Gb NICs. That's what it is meant for. The issue was that VMQ was being enabled by default for 1Gb adapters, and that was causing the problems.
You disable VMQ on anything that is Intel or Broadcomm period. Their drivers are seriously bugged for that. I've got 4 Server 2012 R2 bare metal machines with Intel and Broadcomm 10 gig NICs in them. Network performance absolutely sucks until I disable VMQ.
Up to date firmware on the NICs?
My experience has been the opposite, as well as my research on the subject.
VMQ on 10Gb NICs is fine, that's what it was designed for. VMQ on 1Gb NICs is not fine.
When I disable VMQ on a busy 10Gb NIC on a Hyper-V host, performance goes down.
Yepp. Firmware is up to date (did an update about 2 months ago, I think). The systems have been operational for a year or better.
It's all Cisco gear on the networking side. I've read the same thing that you have that says 10gig is fine to enable VMQ, but on Intel & Broadcomm NICs, it is not.
Those are the NICs I'm talking about, Intel & Broadcom. Maybe I just have un-effected models in all of the servers I've dealt with.
-
@Tim_G said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
@dafyre said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
@Tim_G said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
@dafyre said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
@Tim_G said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
@NashBrydges said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
@JaredBusch said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
Disable-NetAdapterVMQ
Yeah I was aware of the VMQ issues so that was disabled.
Once the office had closed for the day and after an hour of toying with everything I could find, I decided to completely uninstall the network drivers and reinstall from scratch. Deleted the vswitch and recreated it. Also uninstalled network drivers from workstation and reinstalled. Rebooted everything including the switch and it looks like everything is back to normal...for now. Not sure why this changed anything since none of the settings have changed. Just bizarre.
Thanks for your help everyone.
You do not want to disable VMQ on 10Gb NICs. That's what it is meant for. The issue was that VMQ was being enabled by default for 1Gb adapters, and that was causing the problems.
You disable VMQ on anything that is Intel or Broadcomm period. Their drivers are seriously bugged for that. I've got 4 Server 2012 R2 bare metal machines with Intel and Broadcomm 10 gig NICs in them. Network performance absolutely sucks until I disable VMQ.
Up to date firmware on the NICs?
My experience has been the opposite, as well as my research on the subject.
VMQ on 10Gb NICs is fine, that's what it was designed for. VMQ on 1Gb NICs is not fine.
When I disable VMQ on a busy 10Gb NIC on a Hyper-V host, performance goes down.
Yepp. Firmware is up to date (did an update about 2 months ago, I think). The systems have been operational for a year or better.
It's all Cisco gear on the networking side. I've read the same thing that you have that says 10gig is fine to enable VMQ, but on Intel & Broadcomm NICs, it is not.
Those are the NICs I'm talking about, Intel & Broadcom. Maybe I just have un-effected models in all of the servers I've dealt with.
I hope so, lol. But if you start having problems with Intel or Broadcomm NICs, that' the first place I'd start.
-
@dafyre said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
@Tim_G said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
@dafyre said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
@Tim_G said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
@dafyre said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
@Tim_G said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
@NashBrydges said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
@JaredBusch said in Transfer Large File To Host = GOOD Transfer Large File To VM File Server On Same Host = BAD:
Disable-NetAdapterVMQ
Yeah I was aware of the VMQ issues so that was disabled.
Once the office had closed for the day and after an hour of toying with everything I could find, I decided to completely uninstall the network drivers and reinstall from scratch. Deleted the vswitch and recreated it. Also uninstalled network drivers from workstation and reinstalled. Rebooted everything including the switch and it looks like everything is back to normal...for now. Not sure why this changed anything since none of the settings have changed. Just bizarre.
Thanks for your help everyone.
You do not want to disable VMQ on 10Gb NICs. That's what it is meant for. The issue was that VMQ was being enabled by default for 1Gb adapters, and that was causing the problems.
You disable VMQ on anything that is Intel or Broadcomm period. Their drivers are seriously bugged for that. I've got 4 Server 2012 R2 bare metal machines with Intel and Broadcomm 10 gig NICs in them. Network performance absolutely sucks until I disable VMQ.
Up to date firmware on the NICs?
My experience has been the opposite, as well as my research on the subject.
VMQ on 10Gb NICs is fine, that's what it was designed for. VMQ on 1Gb NICs is not fine.
When I disable VMQ on a busy 10Gb NIC on a Hyper-V host, performance goes down.
Yepp. Firmware is up to date (did an update about 2 months ago, I think). The systems have been operational for a year or better.
It's all Cisco gear on the networking side. I've read the same thing that you have that says 10gig is fine to enable VMQ, but on Intel & Broadcomm NICs, it is not.
Those are the NICs I'm talking about, Intel & Broadcom. Maybe I just have un-effected models in all of the servers I've dealt with.
I hope so, lol. But if you start having problems with Intel or Broadcomm NICs, that' the first place I'd start.
I have. And it was always with old-firmware'd 1Gb broadcoms. Never 10Gb.
