Nextcloud Running on Raspian



  • Following up on this but using (Raspberry Pi3) Raspian Jessie lite

    1. Update and Upgrade done using
    sudo apt-get update
    Sudo apt-get upgrade
    

    Rebooted

    Get NextCloud 11.0..0

    wget https://download.nextcloud.com/server/releases/nextcloud-11.0.0.tar.bz2
    

    Extract

    tar -jxvf nextcloud-11.0.0.tar.bz2
    

    Copy to /var/www/html

    sudo cp -Rv nextcloud/* /var/www/html/
    

    and received this error:

    cp: target ‘/var/www/html/’ is not a directory
    

    Is this a case of I need to insert a step to create that directory?

    ETA: enough difference that I have forked the topic.



  • @gjacobse said in Ubuntu 16.04 + NextCloud 10 Install Guide:

    Following up on this but using (Raspberry Pi3) Raspian Jessie lite

    1. Update and Upgrade done using
    sudo apt-get update
    Sudo apt-get upgrade
    

    Rebooted

    Get NextCloud 11.0..0

    wget https://download.nextcloud.com/server/releases/nextcloud-11.0.0.tar.bz2
    

    Extract

    tar -jxvf nextcloud-11.0.0.tar.bz2
    

    Copy to /var/www/html

    sudo cp -Rv nextcloud/* /var/www/html/
    

    and received this error:

    cp: target ‘/var/www/html/’ is not a directory
    

    Is this a case of I need to insert a step to create that directory?

    Most likely. I've not tested this against anything other than Ubuntu 16 yet.



  • @dafyre said in Nextcloud Running on Raspian:

    @gjacobse said in Ubuntu 16.04 + NextCloud 10 Install Guide:

    Following up on this but using (Raspberry Pi3) Raspian Jessie lite

    1. Update and Upgrade done using
    sudo apt-get update
    Sudo apt-get upgrade
    

    Rebooted

    Get NextCloud 11.0..0

    wget https://download.nextcloud.com/server/releases/nextcloud-11.0.0.tar.bz2
    

    Extract

    tar -jxvf nextcloud-11.0.0.tar.bz2
    

    Copy to /var/www/html

    sudo cp -Rv nextcloud/* /var/www/html/
    

    and received this error:

    cp: target ‘/var/www/html/’ is not a directory
    

    Is this a case of I need to insert a step to create that directory?

    Most likely. I've not tested this against anything other than Ubuntu 16 yet.

    Yes. That copy command won't create a directory that doesn't exist.



  • @gjacobse Did you get the prerequisites installed? apache2, php, mariadb, etc?



  • @travisdh1 said in Nextcloud Running on Raspian:

    @gjacobse Did you get the prerequisites installed? apache2, php, mariadb, etc?

    This is likely the issue.



  • @dafyre said in Nextcloud Running on Raspian:

    @travisdh1 said in Nextcloud Running on Raspian:

    @gjacobse Did you get the prerequisites installed? apache2, php, mariadb, etc?

    This is likely the issue.

    That's another issue. The original was trying to copy files to a nonexistent directory. cp is like that.



  • You will probably have to create the directory first.



  • I started with this: Manual Install

    and since this was a new SD card, started with the PHP - which didn't install. Which is why I dropped back to that thread on installing,...


    Example Installation on Ubuntu 16.04 LTS Server
    On a machine running a pristine Ubuntu 16.04 LTS server, install the required and recommended modules for a typical Nextcloud installation, using Apache and MariaDB, by issuing the following commands in a terminal:

    apt-get install apache2 mariadb-server libapache2-mod-php7.0
    apt-get install php7.0-gd php7.0-json php7.0-mysql php7.0-curl php7.0-mbstring
    apt-get install php7.0-intl php7.0-mcrypt php-imagick php7.0-xml php7.0-zip
    

    This installs the packages for the Nextcloud core system. libapache2-mod-php7.0 provides the following PHP extensions: bcmath bz2 calendar Core ctype date dba dom ereg exif fileinfo filter ftp gettext hash iconv libxml mhash openssl pcre Phar posix Reflection session shmop SimpleXML soap sockets SPL standard sysvmsg sysvsem sysvshm tokenizer wddx xmlreader xmlwriter zlib. If you are planning on running additional apps, keep in mind that they might require additional packages. See Prerequisites for details.

    At the installation of the MySQL/MariaDB server, you will be prompted to create a root password. Be sure to remember your password as you will need it during Nextcloud database setup.


    sudo apt-get install apache2 mariadb-server libapache2-mod-php7.0
    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    E: Unable to locate package libapache2-mod-php7.0
    E: Couldn't find any package by regex 'libapache2-mod-php7.0'
    
    


  • @gjacobse said in Nextcloud Running on Raspian:

    I started with this: Manual Install

    and since this was a new SD card, started with the PHP - which didn't install. Which is why I dropped back to that thread on installing,...


    Example Installation on Ubuntu 16.04 LTS Server
    On a machine running a pristine Ubuntu 16.04 LTS server, install the required and recommended modules for a typical Nextcloud installation, using Apache and MariaDB, by issuing the following commands in a terminal:

    apt-get install apache2 mariadb-server libapache2-mod-php7.0
    apt-get install php7.0-gd php7.0-json php7.0-mysql php7.0-curl php7.0-mbstring
    apt-get install php7.0-intl php7.0-mcrypt php-imagick php7.0-xml php7.0-zip
    

    This installs the packages for the Nextcloud core system. libapache2-mod-php7.0 provides the following PHP extensions: bcmath bz2 calendar Core ctype date dba dom ereg exif fileinfo filter ftp gettext hash iconv libxml mhash openssl pcre Phar posix Reflection session shmop SimpleXML soap sockets SPL standard sysvmsg sysvsem sysvshm tokenizer wddx xmlreader xmlwriter zlib. If you are planning on running additional apps, keep in mind that they might require additional packages. See Prerequisites for details.

    At the installation of the MySQL/MariaDB server, you will be prompted to create a root password. Be sure to remember your password as you will need it during Nextcloud database setup.


    sudo apt-get install apache2 mariadb-server libapache2-mod-php7.0
    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    E: Unable to locate package libapache2-mod-php7.0
    E: Couldn't find any package by regex 'libapache2-mod-php7.0'
    
    

    Do apt-cache search libapache2. That should get you everything like that. You may have to add the php7 repo to apt on Raspian.

    https://www.stewright.me/2016/03/turn-raspberry-pi-3-php-7-powered-web-server/



  • @coliver

    This is the output from that:

     apt-cache search libapache2
    libapache-mod-jk-doc - Documentation of libapache2-mod-jk package
    libapache2-authcassimple-perl - Apache2 module to authenticate trough a CAS server
    libapache2-authcookie-perl - Perl Authentication and Authorization via cookies
    libapache2-authenntlm-perl - module for Microsoft NTLM and Basic User Authentication
    libapache2-mod-apparmor - changehat AppArmor library as an Apache module
    libapache2-mod-apreq2 - generic Apache request library - Apache module
    libapache2-mod-auth-cas - CAS authentication module for Apache2
    libapache2-mod-auth-gssapi - GSSAPI Authentication module for Apache2
    libapache2-mod-auth-kerb - apache2 module for Kerberos authentication
    libapache2-mod-auth-mellon - SAML 2.0 authentication module for Apache
    libapache2-mod-auth-memcookie - Apache2 authentication and authorization module.
    libapache2-mod-auth-ntlm-winbind - apache2 module for NTLM authentication against Winbind
    libapache2-mod-auth-openid - OpenID authentication module for Apache2
    libapache2-mod-auth-openidc - OpenID Connect authentication module for Apache
    libapache2-mod-auth-pgsql - Module for Apache2 which provides PostgreSQL authentication
    libapache2-mod-auth-plain - Module for Apache2 which provides plaintext authentication
    libapache2-mod-auth-pubtkt - key-based single-sign-on authentication module for Apache
    libapache2-mod-auth-radius - Apache 2.x module for RADIUS authentication
    libapache2-mod-auth-tkt - lightweight single-sign-on authentication module for Apache
    libapache2-mod-authn-sasl - SASL authentication backend provider for Apache
    libapache2-mod-authn-webid - WebID FOAF+SSL authentication module for Apache
    libapache2-mod-authn-yubikey - Yubikey authentication provider for Apache
    libapache2-mod-authnz-external - authenticate Apache against external authentication services
    libapache2-mod-authnz-pam - PAM authorization checker and PAM Basic Authentication provider
    libapache2-mod-authnz-persona - Apache module implementing Persona authentication
    libapache2-mod-authz-securepass - Apache2 module for authorizing SecurePass users
    libapache2-mod-authz-unixgroup - access control based on on unix group membership for Apache
    libapache2-mod-axis2c - Apache web services engine - apache module
    libapache2-mod-bw - bandwidth limiting module for apache2
    libapache2-mod-dacs - Distributed Access Control System (DACS) - Apache Module
    libapache2-mod-defensible - module for Apache2 which provides DNSBL usage
    libapache2-mod-dnssd - Zeroconf support for Apache 2 via avahi
    libapache2-mod-encoding - Apache2 module for non-ascii filename interoperability
    libapache2-mod-evasive - evasive module to minimize HTTP DoS or brute force attacks
    libapache2-mod-fcgid - FastCGI interface module for Apache 2
    libapache2-mod-fcgid-dbg - debugging symbols for mod_fcgid
    libapache2-mod-form - Apache module to decode data submitted from Web forms
    libapache2-mod-form-dev - Apache module to decode data submitted from Web forms (development files)
    libapache2-mod-geoip - GeoIP support for apache2
    libapache2-mod-gnutls - Apache module for SSL and TLS encryption with GnuTLS
    libapache2-mod-intercept-form-submit - Apache module to intercept login form submission and run PAM authentication
    libapache2-mod-jk - Apache 2 connector for the Tomcat Java servlet engine
    libapache2-mod-ldap-userdir - Apache module that provides UserDir lookups via LDAP
    libapache2-mod-ldap-userdir-dbg - Debugging symbols for mod_ldap_userdir
    libapache2-mod-lisp - An Apache2 module that interfaces with Lisp environments
    libapache2-mod-log-slow - Apache module for logging of slow requests handling
    libapache2-mod-log-sql - Use SQL to store/write your Apache queries logs - Base
    libapache2-mod-log-sql-dbi - Use SQL to store/write your Apache queries logs - DBI interface
    libapache2-mod-log-sql-mysql - Use SQL to store/write your Apache queries logs - MySQL interface
    libapache2-mod-log-sql-ssl - Use SQL to store/write your Apache queries logs - SSL extension
    libapache2-mod-lookup-identity - Apache module to retrieve additional information about the authenticated user
    libapache2-mod-macro - Transitional package for apache2-bin
    libapache2-mod-mapcache - tile caching server - Apache module
    libapache2-mod-mime-xattr - Apache2 module to get MIME info from filesystem extended attributes
    libapache2-mod-mono - Apache module for running ASP.NET applications on Mono
    libapache2-mod-musicindex - Browse, stream, download and search through MP3/Ogg/FLAC/MP4 files
    libapache2-mod-neko - Apache module for running server-side Neko programs
    libapache2-mod-netcgi-apache - OCaml application-level Internet libraries - netcgi2 Apache2 connector
    libapache2-mod-nss - NSS-based SSL module for Apache2
    libapache2-mod-parser3 - Parser 3, HTML-embedded scripting language (Apache2 module)
    libapache2-mod-passenger - Rails and Rack support for Apache2
    libapache2-mod-perl2 - Integration of perl with the Apache2 web server
    libapache2-mod-perl2-dev - Integration of perl with the Apache2 web server - development files
    libapache2-mod-perl2-doc - Integration of perl with the Apache2 web server - documentation
    libapache2-mod-php5 - server-side, HTML-embedded scripting language (Apache 2 module)
    libapache2-mod-php5filter - server-side, HTML-embedded scripting language (apache 2 filter module)
    libapache2-mod-proxy-html - Transitional package for apache2-bin
    libapache2-mod-proxy-msrpc - Apache module for Outlook Anywhere support in reverse proxy setups
    libapache2-mod-proxy-uwsgi - uwsgi proxy module for Apache2 (mod_uwsgi)
    libapache2-mod-proxy-uwsgi-dbg - debugging symbols for Apache2 mod_proxy_uwsgi
    libapache2-mod-python - Python-embedding module for Apache 2
    libapache2-mod-python-doc - Python-embedding module for Apache 2 - documentation
    libapache2-mod-qos - quality of service module for the apache2
    libapache2-mod-removeip - Module to remove IP from apache2's logs
    libapache2-mod-rivet - Server-side Tcl programming system combining ease of use and power
    libapache2-mod-rivet-doc - Documentation for Rivet, a server-side Tcl programming system
    libapache2-mod-rpaf - module for Apache2 which takes the last IP from the 'X-Forwarded-For' header
    libapache2-mod-ruid2 - suexec module for Apache 2
    libapache2-mod-ruwsgi - uwsgi module for Apache2 (mod_Ruwsgi)
    libapache2-mod-ruwsgi-dbg - debugging symbols for Apache2 mod_Ruwsgi
    libapache2-mod-scgi - Apache module implementing the SCGI protocol
    libapache2-mod-security2 - Tighten web applications security for Apache
    libapache2-mod-shib2 - Federated web single sign-on system (Apache module)
    libapache2-mod-spamhaus - Apache DNSBL module that blocks listed IP addresses
    libapache2-mod-suphp - Apache2 module to run PHP scripts with the owner permissions
    libapache2-mod-svn - Apache Subversion server modules for Apache httpd
    libapache2-mod-upload-progress - upload progress support for the Apache web server
    libapache2-mod-uwsgi - uwsgi module for Apache2 (mod_uwsgi)
    libapache2-mod-uwsgi-dbg - debugging symbols for Apache2 mod_uwsgi
    libapache2-mod-vhost-ldap - Apache 2 module for Virtual Hosting from LDAP
    libapache2-mod-watchcat - Process monitoring Apache module
    libapache2-mod-webauth - Apache module for WebAuth authentication
    libapache2-mod-webauthldap - Apache module for WebAuth LDAP lookup and authorization
    libapache2-mod-webkdc - Apache modules for a WebAuth authentication KDC
    libapache2-mod-wsgi - Python WSGI adapter module for Apache
    libapache2-mod-wsgi-py3 - Python 3 WSGI adapter module for Apache
    libapache2-mod-xsendfile - Serve large static files efficiently from web applications
    libapache2-modsecurity - Dummy transitional package
    libapache2-mpm-itk - multiuser module for Apache
    libapache2-reload-perl - module for reloading Perl modules when changed on disk
    libapache2-request-perl - generic Apache request library - Perl modules
    libapache2-sitecontrol-perl - perl web site authentication/authorization system
    libapache2-svn - Apache Subversion server modules for Apache httpd (dummy package)
    libapache2-webauth - Transitional package for WebAuth Apache modules
    libapache2-webkdc - Transitional package for WebAuth authentication KDC
    liblinux-pid-perl - wrapper around the getpid() and getppid() C functions
    libocamlnet-ocaml-dev - OCaml application-level Internet libraries - core development libraries
    mapcache-cgi - tile caching server - CGI binary
    mono-apache-server2 - ASP.NET 2.0 backend for mod_mono2 Apache module
    mono-apache-server4 - ASP.NET 4.5 backend for mod_mono Apache module
    mono-fastcgi-server2 - ASP.NET 2.0 backend for FastCGI webservers
    mono-fastcgi-server4 - ASP.NET 4.0 backend for FastCGI webservers
    mono-fpm-server - ASP.NET backend for FastCGI Process Manager
    php5-cgi - server-side, HTML-embedded scripting language (CGI binary)
    php5-fpm - server-side, HTML-embedded scripting language (FPM-CGI binary)
    shibboleth-sp2-utils - Federated web single sign-on system (daemon and utilities)
    subversion-dbg - Debug symbols for Apache Subversion
    
    


  • Looks like you need to add the php7 repo. Check the link in my last post.



  • It's definitely PHP 7. This is a thing that occurs with the newer versions of NextCloud.



  • well now I have a page that looks like this:

    0_1484169662237_2017-01-11 16_20_46-Nextcloud.png

    But I just finished @coliver page and am back to the NextCloud install



  • @gjacobse said in Nextcloud Running on Raspian:

    well now I have a page that looks like this:

    0_1484169662237_2017-01-11 16_20_46-Nextcloud.png

    But I just finished @coliver page and am back to the NextCloud install

    From memory this is a permissions issue. it's the chmod/chown part of JB's guide I think if you check that out (obviously changing some of the info to match whatever directories you created etc)

    https://mangolassi.it/topic/10963/install-nextcloud-10-x-on-centos-7-minimal



  • @wirestyle22 said in Nextcloud Running on Raspian:

    @gjacobse said in Nextcloud Running on Raspian:

    well now I have a page that looks like this:

    0_1484169662237_2017-01-11 16_20_46-Nextcloud.png

    But I just finished @coliver page and am back to the NextCloud install

    From memory this is a permissions issue. it's the chmod/chown part of JB's guide I think if you check that out (obviously changing some of the info to match whatever directories you created etc)

    https://mangolassi.it/topic/10963/install-nextcloud-10-x-on-centos-7-minimal

    Just off the top of my head

    chown -R apache2:apache2 /var/www/html


  • @travisdh1 said in Nextcloud Running on Raspian:

    @wirestyle22 said in Nextcloud Running on Raspian:

    @gjacobse said in Nextcloud Running on Raspian:

    well now I have a page that looks like this:

    0_1484169662237_2017-01-11 16_20_46-Nextcloud.png

    But I just finished @coliver page and am back to the NextCloud install

    From memory this is a permissions issue. it's the chmod/chown part of JB's guide I think if you check that out (obviously changing some of the info to match whatever directories you created etc)

    https://mangolassi.it/topic/10963/install-nextcloud-10-x-on-centos-7-minimal

    Just off the top of my head

    chown -R apache2:apache2 /var/www/html
    
    sudo chown -R apache2:apache2 /var/www/html
    chown: invalid user: ‘apache2:apache2’
    


  • @gjacobse said in Nextcloud Running on Raspian:

    @travisdh1 said in Nextcloud Running on Raspian:

    @wirestyle22 said in Nextcloud Running on Raspian:

    @gjacobse said in Nextcloud Running on Raspian:

    well now I have a page that looks like this:

    0_1484169662237_2017-01-11 16_20_46-Nextcloud.png

    But I just finished @coliver page and am back to the NextCloud install

    From memory this is a permissions issue. it's the chmod/chown part of JB's guide I think if you check that out (obviously changing some of the info to match whatever directories you created etc)

    https://mangolassi.it/topic/10963/install-nextcloud-10-x-on-centos-7-minimal

    Just off the top of my head

    chown -R apache2:apache2 /var/www/html
    
    sudo chown -R apache2:apache2 /var/www/html
    chown: invalid user: ‘apache2:apache2’
    

    Must have a different user for the html server than I'm used to on Debian.



  • Started from Zero and and going step by step with this new information. It would have taken ME longer to find and remove all the files and folders from Nextcloud,... so starting from a fresh install was easier and faster.

    Apache2 is running and confirmed. someone want a rematch on AOE II right now.



  • Okay - got to this stage:

    Next we’ll test PHP. Run the following command to create a test file:

    echo "<?php phpinfo();" >> /var/www/html/phpinfo.php
    

    and get:

    pi:~ $ echo "<?php phpinfo();" >> /var/www/html/phpinfo.php
    -bash: /var/www/html/phpinfo.php: Permission denied
    
    pi:~ $ sudo echo "<?php phpinfo();" >> /var/www/html/phpinfo.php
    -bash: /var/www/html/phpinfo.php: Permission denied
    

    trying

    sudo chmod -R o+rw /var/www
    

    That worked.



  • Have it good perfomance?

    Previous versions of Owncloud were very slow in Raspberry.

    Regards



  • I'm willing to bet that even with the Raspberry Pi 3 it's still on the slower side. Glad you got it working @gjacobse



  • @iroal said in Nextcloud Running on Raspian:

    Have it good perfomance?

    Previous versions of Owncloud were very slow in Raspberry.

    Regards

    Good performance != Raspberry Pi, ever.



  • I had to step back from this last night before unpacking NC and proceeding with the next step(s).

    Right now I am at the point of doing the Apache Configuration:


    On Debian, Ubuntu, and their derivatives, Apache installs with a useful configuration so all you have to do is create a /etc/apache2/sites-available/nextcloud.conf file with these lines in it, replacing the Directory and other filepaths with your own filepaths:

    Alias /nextcloud "/var/www/nextcloud/"
    
    <Directory /var/www/nextcloud/>
      Options +FollowSymlinks
      AllowOverride All
    
     <IfModule mod_dav.c>
      Dav off
     </IfModule>
    
     SetEnv HOME /var/www/nextcloud
     SetEnv HTTP_HOME /var/www/nextcloud
    
    </Directory>
    

    When I try to do this, I get [error writing /etc/apache2/site-avialable/nextcloud.conf: no such file or directory]



  • @gjacobse said in Nextcloud Running on Raspian:

    I had to step back from this last night before unpacking NC and proceeding with the next step(s).

    Right now I am at the point of doing the Apache Configuration:


    On Debian, Ubuntu, and their derivatives, Apache installs with a useful configuration so all you have to do is create a /etc/apache2/sites-available/nextcloud.conf file with these lines in it, replacing the Directory and other filepaths with your own filepaths:

    Alias /nextcloud "/var/www/nextcloud/"
    
    <Directory /var/www/nextcloud/>
      Options +FollowSymlinks
      AllowOverride All
    
     <IfModule mod_dav.c>
      Dav off
     </IfModule>
    
     SetEnv HOME /var/www/nextcloud
     SetEnv HTTP_HOME /var/www/nextcloud
    
    </Directory>
    

    When I try to do this, I get [error writing /etc/apache2/site-avialable/nextcloud.conf: no such file or directory]

    @gjacobse said in Nextcloud Running on Raspian:

    I had to step back from this last night before unpacking NC and proceeding with the next step(s).

    Right now I am at the point of doing the Apache Configuration:


    On Debian, Ubuntu, and their derivatives, Apache installs with a useful configuration so all you have to do is create a /etc/apache2/sites-available/nextcloud.conf file with these lines in it, replacing the Directory and other filepaths with your own filepaths:

    Alias /nextcloud "/var/www/nextcloud/"
    
    <Directory /var/www/nextcloud/>
      Options +FollowSymlinks
      AllowOverride All
    
     <IfModule mod_dav.c>
      Dav off
     </IfModule>
    
     SetEnv HOME /var/www/nextcloud
     SetEnv HTTP_HOME /var/www/nextcloud
    
    </Directory>
    

    When I try to do this, I get [error writing /etc/apache2/site-avialable/nextcloud.conf: no such file or directory]

    Make sure it's sites-available ... ?



  • ran this thinking it would allow me to create the file

    sudo chmod -R o+rw /etc/apache2/sites-available/
    

    same issue.. unable to create the file



  • @dafyre said in Nextcloud Running on Raspian:

    Alias /nextcloud "/var/www/nextcloud/"

    <Directory /var/www/nextcloud/>
    Options +FollowSymlinks
    AllowOverride All

    <IfModule mod_dav.c>
    Dav off
    </IfModule>

    SetEnv HOME /var/www/nextcloud
    SetEnv HTTP_HOME /var/www/nextcloud

    </Directory>

    Ah - thanks - didn't catch that.



  • Looks like I missed something...

    0_1484231937878_2017-01-12 09_38_21-Nextcloud.png

    Starting with a simple reboot - then will step backwards



  • @gjacobse said in Nextcloud Running on Raspian:

    Looks like I missed something...

    0_1484231937878_2017-01-12 09_38_21-Nextcloud.png

    Starting with a simple reboot - then will step backwards

    Might have to manually install all of those, the meta-package may not be working in Rasbian 😕



  • @travisdh1

    That is what I am doing now. Thanks to @coliver command:

    apt-cache search php
    

    I see the full context of the module.



  • 0_1484232978557_2017-01-12 09_56_03-Nextcloud.png

    Boom!



Looks like your connection to MangoLassi was lost, please wait while we try to reconnect.