Using dpkg to install on Raspberry Pi

gjacobse

@stacksofplates said in Using dpkg to install on Raspberry Pi:

Can you use gdebi?

yes

pi@raspberrypi:~ $ sudo gdebi --apt-line wspr_2.00r1714_i386.deb
Reading package lists... Done
Building dependency tree
Reading state information... Done
Building data structures... Done
Failed to open the software package
The package might be corrupted or you are not allowed to open the file. Check the permissions of the file.

stacksofplates

@gjacobse said in Using dpkg to install on Raspberry Pi:

@stacksofplates said in Using dpkg to install on Raspberry Pi:

Can you use gdebi?

yes

pi@raspberrypi:~ $ sudo gdebi --apt-line wspr_2.00r1714_i386.deb
Reading package lists... Done
Building dependency tree
Reading state information... Done
Building data structures... Done
Failed to open the software package
The package might be corrupted or you are not allowed to open the file. Check the permissions of the file.

I tried to run it with dpkg and it failed for me also, however it was a different error. They might have just packaged it badly.

gjacobse

@stacksofplates said in Using dpkg to install on Raspberry Pi:

@gjacobse said in Using dpkg to install on Raspberry Pi:
@stacksofplates said in Using dpkg to install on Raspberry Pi:

Can you use gdebi?

yes
pi@raspberrypi:~ $ sudo gdebi --apt-line wspr_2.00r1714_i386.deb
Reading package lists... Done
Building dependency tree
Reading state information... Done
Building data structures... Done
Failed to open the software package
The package might be corrupted or you are not allowed to open the file. Check the permissions of the file.
I tried to run it with dpkg and it failed for me also, however it was a different error. They might have just packaged it badly.

so may not be the nut behind the keyboard,...

stacksofplates

Here's what I got:

jhooks@megatron:~/Downloads$ sudo gdebi wspr_2.00r1714_i386.deb 
[sudo] password for jhooks: 
Reading package lists... Done
Building dependency tree        
Reading state information... Done
Reading state information... Done
This package is uninstallable
Cannot install 'python-tk:i386'

gjacobse

Well there is another package available

pi@raspberrypi:~ $ wget http://physics.princeton.edu/pulsar/K1JT/wspr_2.11r2263_i386.deb
--2016-10-26 19:51:40--  http://physics.princeton.edu/pulsar/K1JT/wspr_2.11r2263_i386.deb
Resolving physics.princeton.edu (physics.princeton.edu)... 128.112.100.6
Connecting to physics.princeton.edu (physics.princeton.edu)|128.112.100.6|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 648034 (633K) [text/plain]
Saving to: ‘wspr_2.11r2263_i386.deb’

wspr_2.11r2263_i386.deb           100%[============================================================>] 632.85K   322KB/s   in 2.0s

2016-10-26 19:51:42 (322 KB/s) - ‘wspr_2.11r2263_i386.deb’ saved [648034/648034]

However:


pi@raspberrypi:~ $ sudo gdebi --apt-line wspr_2.11r2263_i386.deb
Reading package lists... Done
Building dependency tree
Reading state information... Done
Building data structures... Done
This package is uninstallable
Wrong architecture 'i386'
pi@raspberrypi:~ $

gjacobse

Guess it's not meant to be for now. Meh,.. come back tomorrow and poke at it. I hear the TV calling.

thwr

@gjacobse said in Using dpkg to install on Raspberry Pi:

Trying to install the WSPR - Weak Signal Propagation Report software on the rPi3 and running into a small error.
pi@raspberrypi:~ $ sudo dpkg --instdir=. -i wspr_2.00r1714_i386.deb
dpkg-deb: error: `wspr_2.00r1714_i386.deb' is not a debian format archive
dpkg: error processing archive wspr_2.00r1714_i386.deb (--install):
 subprocess dpkg-deb --control returned error exit status 2
Errors were encountered while processing:
 wspr_2.00r1714_i386.deb
Pretty sure @scottalanmiller (or others) can spot the issue in a moment,.. but I'm not seeing it.

Downloading the package doesn't take long, as it's only about 2MB.

Are you sure you want to install an i386 package on armhf? I don't know the software, but it could be a native compiled binary for x86 as the name suggests. You can't run that directly on ARM (except for some emulation in between like QEMU).

Solution: Use an ARM version

thwr

@gjacobse said in Using dpkg to install on Raspberry Pi:

...
Wrong architecture 'i386'
...

Oh, you already found the failure

stacksofplates

@thwr said in Using dpkg to install on Raspberry Pi:

@gjacobse said in Using dpkg to install on Raspberry Pi:
...
Wrong architecture 'i386'
...
Oh, you already found the failure

I glossed over that ha.

gjacobse

Okay so, not likely to get running-

Ah well.. It was a thought. It's not like I don't have several other options on running that software. Just thought it would be interesting to see what I could do with it... Part of the fun - Experimentation

aidan_walsh

According to this article you should be able to compile it for ARM pretty easily on the Pi.

gjacobse

@aidan_walsh said in Using dpkg to install on Raspberry Pi:

According to this article you should be able to compile it for ARM pretty easily on the Pi.

Had not found that yet....

Guess I know what I am doing for the next bit...well,.. in between trying to resolve a Windows 8.1 File Explorer issue on (gasp) another MS Surface.

gjacobse

My guess is that it didn't compile correctly:

pi@raspberrypi:~/wspr $ ./wspr
Traceback (most recent call last):
  File "wspr.py", line 38, in <module>
    import Image, ImageTk, ImageDraw
ImportError: No module named Image

aidan_walsh

Missing a dependency?

gjacobse

@aidan_walsh said in Using dpkg to install on Raspberry Pi:

Missing a dependency?

Sudo apt-get update

was run prior to starting

aidan_walsh

Didi you grab the branch the article refers to or the latest?

And

sudo apt-get install build-essential subversion python2.7-dev python-numpy python-imaging-tk python-pmw libportaudio2 portaudio19-dev libsamplerate0-dev gfortran cl-fftw3 python-dev hamlib-utils

?

gjacobse

@aidan_walsh

Yes - that was done. Went line by line.

gjacobse

Going at it again... going line by line of this page:

http://wsprnet.org/drupal/node/5353

sudo apt-get update
Get:1 http://archive.raspberrypi.org jessie InRelease [13.2 kB]
Hit http://mirrordirector.raspbian.org jessie InRelease
Hit http://mirrordirector.raspbian.org jessie/main armhf Packages
Get:2 http://archive.raspberrypi.org jessie/main armhf Packages [106 kB]
Hit http://mirrordirector.raspbian.org jessie/contrib armhf Packages
Hit http://mirrordirector.raspbian.org jessie/non-free armhf Packages
Hit http://mirrordirector.raspbian.org jessie/rpi armhf Packages
Get:3 http://archive.raspberrypi.org jessie/ui armhf Packages [52.7 kB]
Ign http://archive.raspberrypi.org jessie/main Translation-en_US
Ign http://archive.raspberrypi.org jessie/main Translation-en
Ign http://archive.raspberrypi.org jessie/ui Translation-en_US
Ign http://archive.raspberrypi.org jessie/ui Translation-en
Ign http://mirrordirector.raspbian.org jessie/contrib Translation-en_US
Ign http://mirrordirector.raspbian.org jessie/contrib Translation-en
Ign http://mirrordirector.raspbian.org jessie/main Translation-en_US
Ign http://mirrordirector.raspbian.org jessie/main Translation-en
Ign http://mirrordirector.raspbian.org jessie/non-free Translation-en_US
Ign http://mirrordirector.raspbian.org jessie/non-free Translation-en
Ign http://mirrordirector.raspbian.org jessie/rpi Translation-en_US
Ign http://mirrordirector.raspbian.org jessie/rpi Translation-en
Fetched 172 kB in 6s (25.0 kB/s)
Reading package lists... Done

 sudo apt-get install build-essential subversion python2.7-dev python-numpy python-imaging-tk python-pmw libportaudio2 portaudio19-dev libsamplerate0-dev gfortran cl-fftw3 python-dev hamlib-utils
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'libhamlib-utils' instead of 'hamlib-utils'
build-essential is already the newest version.
cl-fftw3 is already the newest version.
gfortran is already the newest version.
libhamlib-utils is already the newest version.
libportaudio2 is already the newest version.
libsamplerate0-dev is already the newest version.
portaudio19-dev is already the newest version.
python-dev is already the newest version.
python-imaging-tk is already the newest version.
python-numpy is already the newest version.
python-pmw is already the newest version.
python2.7-dev is already the newest version.
subversion is already the newest version.
The following packages were automatically installed and are no longer required:
  libboost-atomic1.55.0 libboost-filesystem1.55.0 libboost-program-options1.55.0 libboost-regex1.55.0
  libboost-thread1.55.0 libcwiid1 libjs-prettify libqscintilla2-11 libqscintilla2-l10n libqt4-network
  libqt4-xmlpatterns libqtwebkit4 libruby1.9.1 libruby1.9.1-dbg libruby2.1 libscsynth1 libtcl8.5 libtcltk-ruby1.9.1
  libtk8.5 libyaml-0-2 ri1.9.1 ruby ruby1.9.1 ruby1.9.1-dev ruby1.9.1-examples ruby1.9.1-full ruby1.9.3 ruby2.1
  rubygems-integration supercollider supercollider-common supercollider-ide supercollider-language
  supercollider-server supercollider-supernova tcl8.5 tk8.5
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 72 not upgraded.

Thus far nothing has changed or updated.

gjacobse

 svn co svn://svn.code.sf.net/p/wsjt/wsjt/branches/wspr -r2840
A    wspr/set.f
A    wspr/wfile5.f
A    wspr/wspr0_rx.f90
A    wspr/geodist.f
A    wspr/cs_stubs.f90
A    wspr/calibrate.f90
A    wspr/WSPRcode.f90
A    wspr/gocal
A    wspr/rx.f90
A    wspr/WSPR.iss
A    wspr/start_threads.c
A    wspr/averms.f90
A    wspr/ptt_unix.c
A    wspr/Wspr_Howto_MacOSX_10.6.html
A    wspr/Makefile.MinGW
A    wspr/hftoa.f90
A    wspr/BUGS
A    wspr/configure.ac
A    wspr/libsamplerate.a
A    wspr/pa.lib
A    wspr/paterminate.f90
A    wspr/win_stdint.h
A    wspr/db.f
A    wspr/getfile.f90
A    wspr/hash.f90
A    wspr/Makefile_10.6
A    wspr/gofmt.bat
A    wspr/WSPR_Announcement.TXT
A    wspr/wspr_tr.in0
A    wspr/thnix.f90
A    wspr/supported_rigs.txt
A    wspr/setup.py
A    wspr/ptt.c
A    wspr/hamlib_rig_numbers
A    wspr/ccf.f90
A    wspr/resample.c
A    wspr/sync162.f
A    wspr/wspr
A    wspr/libhamlib-2.dll
A    wspr/acom1.f90
A    wspr/WsprModNoGui
A    wspr/WsprModNoGui/iq.py
A    wspr/WsprModNoGui/options.py
A    wspr/WsprModNoGui/__init__.py
A    wspr/WsprModNoGui/palettes.py
A    wspr/WsprModNoGui/hopping.py
A    wspr/WsprModNoGui/advanced.py
A    wspr/WsprModNoGui/g.py
A    wspr/calobs.f90
A    wspr/fchisq.f
A    wspr/startrx.f90
A    wspr/unpacktext2.f90
A    wspr/f2py.py
A    wspr/packgrid.f
A    wspr/encode232.f
A    wspr/wspr1.f90
A    wspr/giss.bat
A    wspr/deg2grid.f
A    wspr/sort.f
A    wspr/tkrep.py
A    wspr/g2.bat
A    wspr/wsprrc
A    wspr/libfftw3f_win.a
A    wspr/four2a.f
A    wspr/wspr.py
A    wspr/samplerate.h
A    wspr/wspr0_tx.f90
A    wspr/read_wav.f90
A    wspr/hamlib-tentec.dll
A    wspr/fil1.f90
A    wspr/tx.f90
A    wspr/packpfx.f90
A    wspr/DFINC.MAK
A    wspr/gocal.bat
A    wspr/hamlib-yaesu.dll
A    wspr/xfft.f
A    wspr/packcall.f
A    wspr/libfftw3f.a
A    wspr/pack50.f
A    wspr/wspr_nogui.txt
A    wspr/wsprrc.win
A    wspr/packname.f90
A    wspr/rh.bat
A    wspr/unpackname.f90
A    wspr/azdist.f
A    wspr/wqdecode.f90
A    wspr/rxtxcoord.f90
A    wspr/0230.bat
A    wspr/qth.f90
A    wspr/Makefile.CVF
A    wspr/DEB
A    wspr/unpackmept.f
A    wspr/decode162.f
A    wspr/fmeasure.f90
A    wspr/starttx.f90
A    wspr/spec162.f
A    wspr/afc2.f90
A    wspr/getsound.c
A    wspr/unpackgrid.f
A    wspr/fcal.dat
A    wspr/libportaudio.a
A    wspr/fmtiq.f90
A    wspr/aclocal.m4
A    wspr/install-sh
A    wspr/t1.f90
A    wspr/speciq.f90
A    wspr/Makefile.in
A    wspr/nhash.c
A    wspr/wspr_nogui.py
A    wspr/ftn_quit.f90
A    wspr/getutc.f90
A    wspr/libpthreadGC2.a
A    wspr/ss.bat
A    wspr/inter_mept.f
A    wspr/padevsub.c
A    wspr/hamlib-icom.dll
A    wspr/portaudio.h
A    wspr/audiodev.f90
A    wspr/pthreadGC2.dll
A    wspr/Hamlib.Rigs
A    wspr/unpackcall.f
A    wspr/wqencode.f90
A    wspr/fcal.f90
A    wspr/rigctl.exe
A    wspr/startdec.f90
A    wspr/twkfreq.f
A    wspr/sched_w32.h
A    wspr/configure_10.6.ac
A    wspr/pthread_w32.h
A    wspr/peakup.f
A    wspr/mix162.f
A    wspr/fmtave.f90
A    wspr/iqdemod.f90
A    wspr/msgtrim.f90
A    wspr/nchar.f
A    wspr/conv232.f
A    wspr/decode.f90
A    wspr/hamlib-flexradio.dll
A    wspr/genwspr.f90
A    wspr/WSPR_Quick_Start.TXT
A    wspr/0230
A    wspr/chklevel.f90
A    wspr/0215.bat
A    wspr/acom2.f90
A    wspr/wsjt.ico
A    wspr/wspr_rxtest.f90
A    wspr/write_wav.f90
A    wspr/wspr0.f90
A    wspr/phasetx.f90
A    wspr/hamlib-kenwood.dll
A    wspr/wspr2.f90
A    wspr/packprop.f90
A    wspr/g1.bat
A    wspr/WSPR0_Instructions.TXT
A    wspr/clean.f90
A    wspr/unpackprop.f90
A    wspr/configure
A    wspr/mept162.f
A    wspr/user_hardware.py
A    wspr/genmept.f
A    wspr/fmt.f90
A    wspr/gran.f90
A    wspr/configure_10.6
A    wspr/ffa.f90
A    wspr/hamlib-kit.dll
A    wspr/WsprMod
A    wspr/WsprMod/specjt.py
A    wspr/WsprMod/iq.py
A    wspr/WsprMod/options.py
A    wspr/WsprMod/__init__.py
A    wspr/WsprMod/smeter.py
A    wspr/WsprMod/palettes.py
A    wspr/WsprMod/PmwColor.py
A    wspr/WsprMod/Pmw.py
A    wspr/WsprMod/hopping.py
A    wspr/WsprMod/PmwBlt.py
A    wspr/WsprMod/advanced.py
A    wspr/WsprMod/g.py
A    wspr/fthread.c
A    wspr/save
A    wspr/save/dummy
A    wspr/LICENSE.TXT
A    wspr/ccf2.f
A    wspr/xcor162.f90
A    wspr/packtext2.f90
A    wspr/pctile.f
A    wspr/gencwid.f
A    wspr/sound.c
A    wspr/libusb0.dll
A    wspr/unpack50.f
A    wspr/fftw3.f
A    wspr/wwv.f90
A    wspr/four2.f
A    wspr/thnix_stub.f90
A    wspr/gmtime2.c
A    wspr/getrms.f
A    wspr/fold1pps.f90
A    wspr/rxtest.f90
A    wspr/unpackpfx.f90
A    wspr/flat3.f
A    wspr/fano232.f
A    wspr/ssort.f
A    wspr/ps162.f
A    wspr/playsound.c
A    wspr/user_hardware.bat
A    wspr/slope.f
A    wspr/thcvf.f90
A    wspr/morse.f
A    wspr/grid2deg.f
Checked out revision 2840.

gjacobse

./configure --with-portaudio-include-dir=/usr/include --with-portaudio-lib-dir=/usr/lib/arm-linux-gnueabihf
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for g77... no
checking for xlf... no
checking for f77... f77
checking whether we are using the GNU Fortran 77 compiler... yes
checking whether f77 accepts -g... yes
./configure: line 3074: test: =: unary operator expected
checking uname -s... no
checking for g95... no
checking for gfortran... /usr/bin/gfortran
*** gfortran compiler found at /usr/bin/gfortran
*** No g95 compiler found
checking for a v19 portaudio ... checking for Pa_GetVersion in -lportaudio... yes
checking if gcc is Apple GCC... no
checking for library containing strerror... none required
checking for inline... inline
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking whether gcc needs -traditional... no
checking whether make sets $(MAKE)... yes
checking for a BSD-compatible install... /usr/bin/install -c
checking for rm... /bin/rm
checking for cp... /bin/cp
checking for mv... /bin/mv
checking for ln... /bin/ln
checking for sed... /bin/sed
checking for ar... /usr/bin/ar
checking for ld... /usr/bin/ld
checking for test... /usr/bin/test
checking for python... /usr/bin/python
checking for f2py... /usr/bin/f2py
checking OS... checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for inttypes.h... (cached) yes
checking for stdint.h... (cached) yes
checking sys/resource.h usability... yes
checking sys/resource.h presence... yes
checking for sys/resource.h... yes
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking sys/syslog.h usability... yes
checking sys/syslog.h presence... yes
checking for sys/syslog.h... yes
checking stddef.h usability... yes
checking stddef.h presence... yes
checking for stddef.h... yes
checking libgen.h usability... yes
checking libgen.h presence... yes
checking for libgen.h... yes
checking sys/wait.h usability... yes
checking sys/wait.h presence... yes
checking for sys/wait.h... yes
checking wait.h usability... yes
checking wait.h presence... yes
checking for wait.h... yes
checking stdio.h usability... yes
checking stdio.h presence... yes
checking for stdio.h... yes
checking termios.h usability... yes
checking termios.h presence... yes
checking for termios.h... yes
checking for sys/resource.h... (cached) yes
checking linux/ppdev.h usability... yes
checking linux/ppdev.h presence... yes
checking for linux/ppdev.h... yes
checking dev/ppbus/ppi.h usability... no
checking dev/ppbus/ppi.h presence... no
checking for dev/ppbus/ppi.h... no
checking for sys/stat.h... (cached) yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking whether time.h and sys/time.h may both be included... yes
checking samplerate.h usability... yes
checking samplerate.h presence... yes
checking for samplerate.h... yes
checking whether string.h and strings.h may both be included... yes
checking stdarg.h usability... yes
checking stdarg.h presence... yes
checking for stdarg.h... yes

configure: creating ./config.status
config.status: creating Makefile


Using gfortran as fortran compiler.


Compiling wspr 1.11

Installing into: /usr/local/