Setting Up Samba for Use with Plex (CentOS 7.2 Minimal)

travisdh1

@wirestyle22 said in Setting Up Samba for Use with Plex (CentOS 7.2 Minimal):

@stacksofplates Very helpful. How would I go about performing the actual resize? I have never done that before.

Is it actually mounted anywhere yet? Could you show us?

df -h

Might just need to change the mount point from /home.

wirestyle22

travisdh1

@wirestyle22 said in Setting Up Samba for Use with Plex (CentOS 7.2 Minimal):

Yep, you just need to change the line in /etc/fstab that starts

/dev/mapper/centos-home /home

to

/dev/mapper/centos-home /home/samba

Sure, you could resize the partition, but if the box isn't used for anything else it won't cause a problem. /home is normally put on it's own partition to keep users from bringing the OS down due to running out of drive space. If users aren't going to be using anything but the samba share, then that's not going to become an issue.

wirestyle22

@travisdh1 Thanks! Testing in a minute.

travisdh1

@travisdh1 I might rename the logical volume as well, make sure to unmount /home first.

umount /home
lvrename /dev/centos/home /dev/centos/samba
mount -a

travisdh1

@travisdh1 I'm going to fast while multi-tasking tonight, can you tell? Don't forget to put the correct path in /etc/fstab if you rename the logical volume.

scottalanmiller

You are going to fast? Religious thing?

travisdh1

@scottalanmiller said in Setting Up Samba for Use with Plex (CentOS 7.2 Minimal):

You are going to fast? Religious thing?

Weight loss

scottalanmiller

@travisdh1 said in Setting Up Samba for Use with Plex (CentOS 7.2 Minimal):

@scottalanmiller said in Setting Up Samba for Use with Plex (CentOS 7.2 Minimal):

You are going to fast? Religious thing?

Weight loss

I've had nothing but salads and beer today.

wirestyle22

@travisdh1 So I did that as seen below, but I'm still running into that space issue. It's putting everything into the root folder. I'm sure this is something obvious but I'm not seeing it. Any ideas?

travisdh1

@wirestyle22 We have to figure out where the files are going then, since they are not going into /home/samba like we thought. 'du -h' is what I'd use for this, it will show you the amount of storage used in the current directory and sub-directories.

wirestyle22

@travisdh1 Figured it out. Thanks!

NashBrydges

So...any thoughts on best practice for Plex setup but with >30TB of content?