Final Call ... XenServer Boot Media
-
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
XS rewrote the rsyslog.conf every time.
Ah, I never saw that mentioned and that means that you were addressing the wrong thing. You needed to stop it changing rsyslog.conf. What did you do to stop it from doing that?
Nothing. I followed the instructions in the above mentioned article.
If this article isn't for doing what you want, why expect it to do something different than it is intended to do?
I'm not.
I don't understand your question/comment.
-
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
XS rewrote the rsyslog.conf every time.
Ah, I never saw that mentioned and that means that you were addressing the wrong thing. You needed to stop it changing rsyslog.conf. What did you do to stop it from doing that?
Nothing. I followed the instructions in the above mentioned article.
If this article isn't for doing what you want, why expect it to do something different than it is intended to do?
I'm not.
I don't understand your question/comment.
Why were you following the instructions in that article? What was the end goal?
-
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
XS rewrote the rsyslog.conf every time.
Ah, I never saw that mentioned and that means that you were addressing the wrong thing. You needed to stop it changing rsyslog.conf. What did you do to stop it from doing that?
Nothing. I followed the instructions in the above mentioned article.
If this article isn't for doing what you want, why expect it to do something different than it is intended to do?
I'm not.
I don't understand your question/comment.
Why were you following the instructions in that article? What was the end goal?
To prevent XS from logging locally when I have it set up to log externally.
In XS it was an issue because the smaller logging partition filled up. So that article touched on how to use log rotating, or just simply disable local logging.
Their tips did not work for everyone, as evidenced by me and it the comments. They they suggesyed just making the file read-only.
Let me check how XS7 does logs. Maybe it is totally different.
I know @DustinB3403 had a thread about the logging as well.
I'd love to get this figured out and make it into a XS best practice, because it seems like every week there is a thread about it.
-
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
XS rewrote the rsyslog.conf every time.
Ah, I never saw that mentioned and that means that you were addressing the wrong thing. You needed to stop it changing rsyslog.conf. What did you do to stop it from doing that?
Nothing. I followed the instructions in the above mentioned article.
If this article isn't for doing what you want, why expect it to do something different than it is intended to do?
I'm not.
I don't understand your question/comment.
Why were you following the instructions in that article? What was the end goal?
To prevent XS from logging locally when I have it set up to log externally.
But the files to do that were not yet modified, right? So we aren't up to step one yet. That's my point. There are config files that make this happen, but those were not changed. Only the ones that they change, were changed, but that won't do anything.
-
@BRRABill said in Final Call ... XenServer Boot Media:
Their tips did not work for everyone, as evidenced by me and it the comments. They they suggesyed just making the file read-only.
Sounds like they were just clueless and not even looking into the problem.
-
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
XS rewrote the rsyslog.conf every time.
Ah, I never saw that mentioned and that means that you were addressing the wrong thing. You needed to stop it changing rsyslog.conf. What did you do to stop it from doing that?
Nothing. I followed the instructions in the above mentioned article.
If this article isn't for doing what you want, why expect it to do something different than it is intended to do?
I'm not.
I don't understand your question/comment.
Why were you following the instructions in that article? What was the end goal?
To prevent XS from logging locally when I have it set up to log externally.
But the files to do that were not yet modified, right? So we aren't up to step one yet. That's my point. There are config files that make this happen, but those were not changed. Only the ones that they change, were changed, but that won't do anything.
Step one is to point XS loggin external. I did that.
Step two is two edit the config file (which is different in XS as we have seen) to remove the sections that still reference local logging. By doing this, XS should never log locally.
However, this file keeps getting overwritten with an original copy.
-
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
Their tips did not work for everyone, as evidenced by me and it the comments. They they suggesyed just making the file read-only.
Sounds like they were just clueless and not even looking into the problem.
Very possible. Or maybe a hotfix or something broke what they originally found to work.
-
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
XS rewrote the rsyslog.conf every time.
Ah, I never saw that mentioned and that means that you were addressing the wrong thing. You needed to stop it changing rsyslog.conf. What did you do to stop it from doing that?
Nothing. I followed the instructions in the above mentioned article.
If this article isn't for doing what you want, why expect it to do something different than it is intended to do?
I'm not.
I don't understand your question/comment.
Why were you following the instructions in that article? What was the end goal?
To prevent XS from logging locally when I have it set up to log externally.
But the files to do that were not yet modified, right? So we aren't up to step one yet. That's my point. There are config files that make this happen, but those were not changed. Only the ones that they change, were changed, but that won't do anything.
Step one is to point XS loggin external. I did that.
Did you? Unless it was in the right file, you didn't. You tried to, but that's not the same as doing it.
-
@BRRABill said in Final Call ... XenServer Boot Media:
Step two is two edit the config file (which is different in XS as we have seen) to remove the sections that still reference local logging. By doing this, XS should never log locally.
Should be both in the same file.
-
@BRRABill said in Final Call ... XenServer Boot Media:
However, this file keeps getting overwritten with an original copy.
That's because it's the wrong file in this case. The first step is to find the right one. Then each of your steps is done in that file and their step numbers should be +1.
-
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
XS rewrote the rsyslog.conf every time.
Ah, I never saw that mentioned and that means that you were addressing the wrong thing. You needed to stop it changing rsyslog.conf. What did you do to stop it from doing that?
Nothing. I followed the instructions in the above mentioned article.
If this article isn't for doing what you want, why expect it to do something different than it is intended to do?
I'm not.
I don't understand your question/comment.
Why were you following the instructions in that article? What was the end goal?
To prevent XS from logging locally when I have it set up to log externally.
But the files to do that were not yet modified, right? So we aren't up to step one yet. That's my point. There are config files that make this happen, but those were not changed. Only the ones that they change, were changed, but that won't do anything.
Step one is to point XS loggin external. I did that.
Did you? Unless it was in the right file, you didn't. You tried to, but that's not the same as doing it.
Yes, I did.
This is accomplished by setting the external logging server in XenCenter.
Or are you saying THAT is incorrect?
-
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
XS rewrote the rsyslog.conf every time.
Ah, I never saw that mentioned and that means that you were addressing the wrong thing. You needed to stop it changing rsyslog.conf. What did you do to stop it from doing that?
Nothing. I followed the instructions in the above mentioned article.
If this article isn't for doing what you want, why expect it to do something different than it is intended to do?
I'm not.
I don't understand your question/comment.
Why were you following the instructions in that article? What was the end goal?
To prevent XS from logging locally when I have it set up to log externally.
But the files to do that were not yet modified, right? So we aren't up to step one yet. That's my point. There are config files that make this happen, but those were not changed. Only the ones that they change, were changed, but that won't do anything.
Step one is to point XS loggin external. I did that.
Did you? Unless it was in the right file, you didn't. You tried to, but that's not the same as doing it.
Yes, I did.
This is accomplished by setting the external logging server in XenCenter.
Or are you saying THAT is incorrect?
Well, WAS it correct? DId it work through a reboot? Did you set it where you now know that you were supposed to or where you now know that it would not work?
-
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
XS rewrote the rsyslog.conf every time.
Ah, I never saw that mentioned and that means that you were addressing the wrong thing. You needed to stop it changing rsyslog.conf. What did you do to stop it from doing that?
Nothing. I followed the instructions in the above mentioned article.
If this article isn't for doing what you want, why expect it to do something different than it is intended to do?
I'm not.
I don't understand your question/comment.
Why were you following the instructions in that article? What was the end goal?
To prevent XS from logging locally when I have it set up to log externally.
But the files to do that were not yet modified, right? So we aren't up to step one yet. That's my point. There are config files that make this happen, but those were not changed. Only the ones that they change, were changed, but that won't do anything.
How was @BRRABill suppose to know that he's editing the wrong files? I guess it's called RTFM.
-
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
XS rewrote the rsyslog.conf every time.
Ah, I never saw that mentioned and that means that you were addressing the wrong thing. You needed to stop it changing rsyslog.conf. What did you do to stop it from doing that?
Nothing. I followed the instructions in the above mentioned article.
If this article isn't for doing what you want, why expect it to do something different than it is intended to do?
I'm not.
I don't understand your question/comment.
Why were you following the instructions in that article? What was the end goal?
To prevent XS from logging locally when I have it set up to log externally.
But the files to do that were not yet modified, right? So we aren't up to step one yet. That's my point. There are config files that make this happen, but those were not changed. Only the ones that they change, were changed, but that won't do anything.
Step one is to point XS loggin external. I did that.
Did you? Unless it was in the right file, you didn't. You tried to, but that's not the same as doing it.
Yes, I did.
This is accomplished by setting the external logging server in XenCenter.
Or are you saying THAT is incorrect?
Well, WAS it correct? DId it work through a reboot? Did you set it where you now know that you were supposed to or where you now know that it would not work?
To expand upon this - when you made the change to send to an external log server in the first file (the one that keeps getting overwritten) did those changes stay through a reboot? and after a reboot, were logs actually going to the external log server?
-
@Dashrender said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
XS rewrote the rsyslog.conf every time.
Ah, I never saw that mentioned and that means that you were addressing the wrong thing. You needed to stop it changing rsyslog.conf. What did you do to stop it from doing that?
Nothing. I followed the instructions in the above mentioned article.
If this article isn't for doing what you want, why expect it to do something different than it is intended to do?
I'm not.
I don't understand your question/comment.
Why were you following the instructions in that article? What was the end goal?
To prevent XS from logging locally when I have it set up to log externally.
But the files to do that were not yet modified, right? So we aren't up to step one yet. That's my point. There are config files that make this happen, but those were not changed. Only the ones that they change, were changed, but that won't do anything.
How was @BRRABill suppose to know that he's editing the wrong files? I guess it's called RTFM.
Well it was getting overwritten. That's a pretty big give away. Something else was changing his configuration. So that wasn't the final configuration. When you look at the documents, they do tell you that that isn't the file in this case and that there is a separate master file that controls that one.
What if he had just opened an editor and made his own file in /tmp/mychanges.txt and wrote in it "don't write logs locally?" That also would not work. But we might say "how was he supposed to know that he had to modify a specific file?"
It's clear that he tried and made a good guess. But it is also clear that the actual configuration was not done correctly and that the first step has to be identifying the right place to make the changes. Instead, changes were made and failure concluded before looking to see which file needed to be modified.
-
@Danp said in Final Call ... XenServer Boot Media:
@BRRABill said in Final Call ... XenServer Boot Media:
Nothing. I followed the instructions in the above mentioned article.
That's a really old post from well before XS7 came out. According to this recent post by a Citrix employee, the proper file to be editing is /etc/rsyslog.d/xenserver.conf
Did you try editing this file?
-
@stacksofplates No, I haven't attempted it yet.
-
@scottalanmiller said in Final Call ... XenServer Boot Media:
Well it was getting overwritten. That's a pretty big give away. Something else was changing his configuration. So that wasn't the final configuration. When you look at the documents, they do tell you that that isn't the file in this case and that there is a separate master file that controls that one.
To which I reply - fraking OS. While it's not impossible so see something like this on Windows, I don't personally recall seeing a file that edits a file like this.
But now I'm just complaining! back to the issue at hand.
-
@Danp said in Final Call ... XenServer Boot Media:
@stacksofplates No, I haven't attempted it yet.
Sorry I was referring to @BRRABill to see if it worked.
-
@Dashrender said in Final Call ... XenServer Boot Media:
@scottalanmiller said in Final Call ... XenServer Boot Media:
Well it was getting overwritten. That's a pretty big give away. Something else was changing his configuration. So that wasn't the final configuration. When you look at the documents, they do tell you that that isn't the file in this case and that there is a separate master file that controls that one.
To which I reply - fraking OS. While it's not impossible so see something like this on Windows, I don't personally recall seeing a file that edits a file like this.
But now I'm just complaining! back to the issue at hand.
This isn't the OS. This is a file that was added to overwrite changes made. Without looking at an XS system, I'm assuming it's a boot script.
