What Are You Doing Right Now
-
@rojoloco said in What Are You Doing Right Now:
@rojoloco said in What Are You Doing Right Now:
@coliver said in What Are You Doing Right Now:
@rojoloco said in What Are You Doing Right Now:
WTF, Unifi controller??? I've pressed "reset password" at least a dozen times from 3 different browsers, yet you have sent me zero emails.
Is this normal behavior or am I going to need to blast it out and start all over?
Did you setup smtp? You have to configure the mail routing piece of it before it will send and email. I've had to do it on mine previously and it worked as expected.
I don't think I had set smtp up yet, but I could have sworn that I had to reset the password once before. Perhaps I was remembering incorrectly. So it's nuke and pave time?
Wow, you can put a bunch of wrong passwords in and still not get locked out. I had my username wrong (derp).
That username might have gotten locked out.
-
@scottalanmiller only 1 user so far, just my first name (I usually do FirstLast). This is all still being tested by development, so even if I had to start over, it's no biggie.
It's much too Friday for me to remember such minute details.
-
@rojoloco said in What Are You Doing Right Now:
@scottalanmiller only 1 user so far, just my first name (I usually do FirstLast). This is all still being tested by development, so even if I had to start over, it's no biggie.
It's much too Friday for me to remember such minute details.
I meant that the user that would get locked out is the mistyped one. Not the actual one.
-
Finally getting my first coffee.
-
@rojoloco No, no need for nuke and pave. You can reset it with mongodb
mongo --port 27117 ace --eval "db.admin.find().forEach(printjson);" -
@dbeato said in What Are You Doing Right Now:
@rojoloco No, no need for nuke and pave. You can reset it with mongodb
mongo --port 27117 ace --eval "db.admin.find().forEach(printjson);"Good to know for the future. Copied and pasted.
-
@dashrender said in What Are You Doing Right Now:
@dustinb3403 said in What Are You Doing Right Now:
@dashrender said in What Are You Doing Right Now:
@nerdydad said in What Are You Doing Right Now:
Trying to keep us safe from Krack. Firmware for AP's are scheduled to be updated during lunch and KB4041676 are being pushed out to clients.
Kids...don't do krack.
Apparently MS and Apple products weren't subject to this because they both implemented the spec incorrectly. LOL
WTF. . .
The businesses that often write the specifications can't even follow the specifications. . . .
Pretty sure they didn't write the specs in this case. But in this rare instance, it was good that they didn't because it kept Windows PCs, MAC PCs and iPhones safe.
That wasn't what I said. I clearly said that they often write specifications and can't follow specifications.
Not even remotely the thing you turned it into. .
-
@dashrender said in What Are You Doing Right Now:
@nerdydad said in What Are You Doing Right Now:
Trying to keep us safe from Krack. Firmware for AP's are scheduled to be updated during lunch and KB4041676 are being pushed out to clients.
Kids...don't do krack.
Apparently MS and Apple products weren't subject to this because they both implemented the spec incorrectly. LOL
So their fail actually saved them? Isn't that a happy accident?
-
Polycom IP6000 now on the latest firmware and application (no longer using firmware and application from 2009). Lo and behold, I put in necessay SIP information within the web config, and it talks to Freepbx without missing a beat.
-
@eddiejennings said in What Are You Doing Right Now:
Polycom IP6000 now on the latest firmware and application (no longer using firmware and application from 2009). Lo and behold, I put in necessay SIP information within the web config, and it talks to Freepbx without missing a beat.
Those phones are ugly, get the Yealink C960.
-
@dustinb3403 said in What Are You Doing Right Now:
@eddiejennings said in What Are You Doing Right Now:
Polycom IP6000 now on the latest firmware and application (no longer using firmware and application from 2009). Lo and behold, I put in necessay SIP information within the web config, and it talks to Freepbx without missing a beat.
Those phones are ugly, get the Yealink C960.
Unfortunately, the price point won't pass the laugh test right now :(.
-
Just finished pulling out Cisco small business APs and replacing them with Ubiquiti.
Good times.
-
@kelly said in What Are You Doing Right Now:
Just finished pulling out Cisco small business APs and replacing them with Ubiquiti.
Good times.
We need some more public reviews of the Ubiquiti kit as I'm trying to get this pushed through myself.
-
Shutting down all systems for building electrical maintenance tomorrow... then I'm off to drink on the company dime!!!
-
@dustinb3403 said in What Are You Doing Right Now:
@kelly said in What Are You Doing Right Now:
Just finished pulling out Cisco small business APs and replacing them with Ubiquiti.
Good times.
We need some more public reviews of the Ubiquiti kit as I'm trying to get this pushed through myself.
The price was low enough to justify getting a demo unit and switch. The demo unit played much more nicely with RADIUS, and then Krack put the final nail in the coffin. UBNT had a patch out the day of the announcement, and Cisco hasn't released anything new for our old system in several months with no official word on the eta of a patch. It is just listed as TBD in the Cisco blog post about Krack.
-
The wife is cooking, I'm just wrapping up status emails.
-
It's a pizza + "Fuller House" family evening.
-
Assisting on C++ Homework... Long time no see for this programming...
-
Just browsed the SW forums for a few minutes since I haven't done that in a while. Back to my happy place with a Linux book.
-
@kelly said in What Are You Doing Right Now:
@dustinb3403 said in What Are You Doing Right Now:
@kelly said in What Are You Doing Right Now:
Just finished pulling out Cisco small business APs and replacing them with Ubiquiti.
Good times.
We need some more public reviews of the Ubiquiti kit as I'm trying to get this pushed through myself.
The price was low enough to justify getting a demo unit and switch. The demo unit played much more nicely with RADIUS, and then Krack put the final nail in the coffin. UBNT had a patch out the day of the announcement, and Cisco hasn't released anything new for our old system in several months with no official word on the eta of a patch. It is just listed as TBD in the Cisco blog post about Krack.
That’s what I am worrying about at my job.
