POTS line replacement
-
@pmoncho said in POTS line replacement:
We have one fax line from our VOIP company that uses one port on an ATA (don't know the correct terminology here) and then two other POTS line for another fax. Those all go into modems connecting to our Hylafax server. This has been good but when its acts up, your right, it is a PITA.
Yeah, that CAN work, but that's what we try to avoid. That's replicating a POTS line in house. That transition process causes problems.
-
@pmoncho said in POTS line replacement:
I looked at the total faxes pages for the last 45 days and we have roughly 9000 pages of faxes.
wow
-
@pmoncho said in POTS line replacement:
I have been pushing my clients with MFP's scan/print to PDF and send via encrypted email. Just cannot seem to convince the remaining clients to change.
When you say "encrypted", do you mean normal email (which is encrypted.) Or what people call "encrypted email" which isn't email at all and is often a huge pain.
-
@pmoncho said in POTS line replacement:
I looked at the total faxes pages for the last 45 days and we have roughly 9000 pages of faxes.
I just can't recall how many pages a month we do when I last looked, but I do recall the monthly charge from a 'fax service' was going to be around $900/month. I didn't even bother bringing that to management - there was less than 1% chance of that happening.
Bringing in faxes to our own physical machines, then saving to a network share was costing around $30/month per line (we have three). We might be able to save money moving to using full on VOIP from VOIP.ms or Skyetel, but that project has been to high on the tree. I say full on VOIP because Cox (our local dial tone provider) is all VOIP behind the equipment they drop on our doorstep, from there it's analog. We have had the typical VOIP related issues - Cox's network had a HUGE amount of line noise on coax causing packet loss which caused faxes to fail like crazy - after 6 months they finally found some bad taps at neighbors up the street and fixed the cable issue, which fixed our fax failure issue.
-
@scottalanmiller said in POTS line replacement:
@pmoncho said in POTS line replacement:
I have been pushing my clients with MFP's scan/print to PDF and send via encrypted email. Just cannot seem to convince the remaining clients to change.
When you say "encrypted", do you mean normal email (which is encrypted.) Or what people call "encrypted email" which isn't email at all and is often a huge pain.
This is oversimplifying things. While the number is small, and getting smaller - some email providers still do not support SSL/TLS SMTP connections. Of course - the OP could setup their own rule saying, if someone tries to sent them email that isn't on SSL/TLS, don't accept, he'd likely need management approval for that.
-
@Dashrender said in POTS line replacement:
@scottalanmiller said in POTS line replacement:
@pmoncho said in POTS line replacement:
I have been pushing my clients with MFP's scan/print to PDF and send via encrypted email. Just cannot seem to convince the remaining clients to change.
When you say "encrypted", do you mean normal email (which is encrypted.) Or what people call "encrypted email" which isn't email at all and is often a huge pain.
This is oversimplifying things. While the number is small, and getting smaller - some email providers still do not support SSL/TLS SMTP connections. Of course - the OP could setup their own rule saying, if someone tries to sent them email that isn't on SSL/TLS, don't accept, he'd likely need management approval for that.
It's not. In the same way someone using "encrypted mail" could unencrypt it and distribute things on their end. In both cases, once you hand off, the issue is theirs not yours. That's all encryption ever means. You never control it once they've take responsibility for it.
-
@scottalanmiller said in POTS line replacement:
@Dashrender said in POTS line replacement:
@scottalanmiller said in POTS line replacement:
@pmoncho said in POTS line replacement:
I have been pushing my clients with MFP's scan/print to PDF and send via encrypted email. Just cannot seem to convince the remaining clients to change.
When you say "encrypted", do you mean normal email (which is encrypted.) Or what people call "encrypted email" which isn't email at all and is often a huge pain.
This is oversimplifying things. While the number is small, and getting smaller - some email providers still do not support SSL/TLS SMTP connections. Of course - the OP could setup their own rule saying, if someone tries to sent them email that isn't on SSL/TLS, don't accept, he'd likely need management approval for that.
It's not. In the same way someone using "encrypted mail" could unencrypt it and distribute things on their end. In both cases, once you hand off, the issue is theirs not yours. That's all encryption ever means. You never control it once they've take responsibility for it.
You're missing the whole encrypted part - not even talking about the sharing shit part.
if you don't have SSL/TLS encryption on transmission, then you don't have HIPAA compliance - so to say all email is encrypted is wrong. - sure 99%+ is because most SMTP now allow for opportunistic TLS, but not all do.
-
@Dashrender said in POTS line replacement:
@scottalanmiller said in POTS line replacement:
@Dashrender said in POTS line replacement:
@scottalanmiller said in POTS line replacement:
@pmoncho said in POTS line replacement:
I have been pushing my clients with MFP's scan/print to PDF and send via encrypted email. Just cannot seem to convince the remaining clients to change.
When you say "encrypted", do you mean normal email (which is encrypted.) Or what people call "encrypted email" which isn't email at all and is often a huge pain.
This is oversimplifying things. While the number is small, and getting smaller - some email providers still do not support SSL/TLS SMTP connections. Of course - the OP could setup their own rule saying, if someone tries to sent them email that isn't on SSL/TLS, don't accept, he'd likely need management approval for that.
It's not. In the same way someone using "encrypted mail" could unencrypt it and distribute things on their end. In both cases, once you hand off, the issue is theirs not yours. That's all encryption ever means. You never control it once they've take responsibility for it.
You're missing the whole encrypted part - not even talking about the sharing shit part.
if you don't have SSL/TLS encryption on transmission, then you don't have HIPAA compliance - so to say all email is encrypted is wrong. - sure 99%+ is because most SMTP now allow for opportunistic TLS, but not all do.
Sure, but it's a pointless argument. Set your email correctly and voila, as you know. You should not have your email set up incorrectly. It's that simple.
-
@scottalanmiller said in POTS line replacement:
@Dashrender said in POTS line replacement:
@scottalanmiller said in POTS line replacement:
@Dashrender said in POTS line replacement:
@scottalanmiller said in POTS line replacement:
@pmoncho said in POTS line replacement:
I have been pushing my clients with MFP's scan/print to PDF and send via encrypted email. Just cannot seem to convince the remaining clients to change.
When you say "encrypted", do you mean normal email (which is encrypted.) Or what people call "encrypted email" which isn't email at all and is often a huge pain.
This is oversimplifying things. While the number is small, and getting smaller - some email providers still do not support SSL/TLS SMTP connections. Of course - the OP could setup their own rule saying, if someone tries to sent them email that isn't on SSL/TLS, don't accept, he'd likely need management approval for that.
It's not. In the same way someone using "encrypted mail" could unencrypt it and distribute things on their end. In both cases, once you hand off, the issue is theirs not yours. That's all encryption ever means. You never control it once they've take responsibility for it.
You're missing the whole encrypted part - not even talking about the sharing shit part.
if you don't have SSL/TLS encryption on transmission, then you don't have HIPAA compliance - so to say all email is encrypted is wrong. - sure 99%+ is because most SMTP now allow for opportunistic TLS, but not all do.
Sure, but it's a pointless argument. Set your email correctly and voila, as you know. You should not have your email set up incorrectly. It's that simple.
uh - what? You don't get to control the other side, only your own side - and I'm guessing that you don't reject all non SSL/TLS connected transmissions, which would be the only thing you could control.
-
@Dashrender said in POTS line replacement:
@pmoncho said in POTS line replacement:
I have been pushing my clients with MFP's scan/print to PDF and send via encrypted email. Just cannot seem to convince the remaining clients to change.
Sadly that is entirely to much effort for them to invest. If their IT can make it happen, the device could send to an email address of their own- then run a process that then emails any attachments to that address to you via encrypted email.
another option - one my EMR is investigating - IF their MFP support scan to secure FTP - you could setup a secure FTP site, provide credentials to your customers (different for each) and your customers could update the MFP to save to the secure FTP site. This leaves the amount of work for the end users to be exactly the same - choose your company from the phonebook, drop the pages on the ADF, press go - done. Should be the same as faxing.
Ohhhh. This is something to look into. I have a client that just may want to test this out.
-
@scottalanmiller said in POTS line replacement:
@pmoncho said in POTS line replacement:
I looked at the total faxes pages for the last 45 days and we have roughly 9000 pages of faxes.
wow
I know. Tell me about it. Trying to work with the LOB app developer to figure out how the heck we can cut that down.
-
@scottalanmiller said in POTS line replacement:
@pmoncho said in POTS line replacement:
I have been pushing my clients with MFP's scan/print to PDF and send via encrypted email. Just cannot seem to convince the remaining clients to change.
When you say "encrypted", do you mean normal email (which is encrypted.) Or what people call "encrypted email" which isn't email at all and is often a huge pain.
The latter. We use Barracuda for email scanning and with the service we can use their web portal to upload/download any attachments.
EDIT: Expanding on this after reading the discussion between Dash and Scott.
When we send out "encrypted" email with some form of the word "Encrypt" in the subject line, our internal email uses SSL/TLS to Barracuda and then Barracuda stores the email. Our user logs into Barracuda website to retrieve the download if needed.
-
@Dashrender said in POTS line replacement:
@pmoncho said in POTS line replacement:
I looked at the total faxes pages for the last 45 days and we have roughly 9000 pages of faxes.
I just can't recall how many pages a month we do when I last looked, but I do recall the monthly charge from a 'fax service' was going to be around $900/month. I didn't even bother bringing that to management - there was less than 1% chance of that happening.
Bringing in faxes to our own physical machines, then saving to a network share was costing around $30/month per line (we have three). We might be able to save money moving to using full on VOIP from VOIP.ms or Skyetel, but that project has been to high on the tree. I say full on VOIP because Cox (our local dial tone provider) is all VOIP behind the equipment they drop on our doorstep, from there it's analog. We have had the typical VOIP related issues - Cox's network had a HUGE amount of line noise on coax causing packet loss which caused faxes to fail like crazy - after 6 months they finally found some bad taps at neighbors up the street and fixed the cable issue, which fixed our fax failure issue.
Well that is interesting. Some fax service I looked at were capped at around 3000 pages for $100 then per page goes nuts after that. Still looking though.
Using our Hylafax server with a Samba Share has worked well for a while especially when we were getting even more faxes but the lines only costed us $24 per line which included calling anywhere in the 48 States.
-
@pmoncho said in POTS line replacement:
Using our Hylafax server with a Samba Share has worked well for a while especially when we were getting even more faxes but the lines only costed us $24 per line which included calling anywhere in the 48 States.
Exactly - no service comes even close in cost for the amount of faxes that you and I are looking at - I want to say I was north of 7000 pages a month when I was last looking.
I have a few small clients who receive their faxes through their FreePBX. FreePBX then emails it to their O365 tenant, where a powerautomation script runs, pulls out the attachment and puts it into a sharepoint site.
The users all have that folder in sharepoint pinned in their OneDrive for Business - in the end, the users just see files showing up in a 'network share' - which they can easily upload into their EMR.
-
Of course that doesn't solve the sending issue. People just don't want to deal with scanning a document, then uploading to a service, then sending from that service, etc...
They want to walk to the machine choose from the address book and hit send.
-
We are lucky - our EMR includes faxing service (in and out). While we still have a not insignificant amount of physical paper to send out, the EMR handing that is generally pretty nice - expect when there are problems, then they blame it 100% on the sending/receiving side, it's never a problem on my EMR's side. /sigh.
-
@Dashrender said in POTS line replacement:
@scottalanmiller said in POTS line replacement:
@Dashrender said in POTS line replacement:
@scottalanmiller said in POTS line replacement:
@Dashrender said in POTS line replacement:
@scottalanmiller said in POTS line replacement:
@pmoncho said in POTS line replacement:
I have been pushing my clients with MFP's scan/print to PDF and send via encrypted email. Just cannot seem to convince the remaining clients to change.
When you say "encrypted", do you mean normal email (which is encrypted.) Or what people call "encrypted email" which isn't email at all and is often a huge pain.
This is oversimplifying things. While the number is small, and getting smaller - some email providers still do not support SSL/TLS SMTP connections. Of course - the OP could setup their own rule saying, if someone tries to sent them email that isn't on SSL/TLS, don't accept, he'd likely need management approval for that.
It's not. In the same way someone using "encrypted mail" could unencrypt it and distribute things on their end. In both cases, once you hand off, the issue is theirs not yours. That's all encryption ever means. You never control it once they've take responsibility for it.
You're missing the whole encrypted part - not even talking about the sharing shit part.
if you don't have SSL/TLS encryption on transmission, then you don't have HIPAA compliance - so to say all email is encrypted is wrong. - sure 99%+ is because most SMTP now allow for opportunistic TLS, but not all do.
Sure, but it's a pointless argument. Set your email correctly and voila, as you know. You should not have your email set up incorrectly. It's that simple.
uh - what? You don't get to control the other side, only your own side - and I'm guessing that you don't reject all non SSL/TLS connected transmissions, which would be the only thing you could control.
Exactly, you only control your offer of security, nothing more. Ever.
-
@pmoncho said in POTS line replacement:
@scottalanmiller said in POTS line replacement:
@pmoncho said in POTS line replacement:
I have been pushing my clients with MFP's scan/print to PDF and send via encrypted email. Just cannot seem to convince the remaining clients to change.
When you say "encrypted", do you mean normal email (which is encrypted.) Or what people call "encrypted email" which isn't email at all and is often a huge pain.
The latter. We use Barracuda for email scanning and with the service we can use their web portal to upload/download any attachments.
EDIT: Expanding on this after reading the discussion between Dash and Scott.
When we send out "encrypted" email with some form of the word "Encrypt" in the subject line, our internal email uses SSL/TLS to Barracuda and then Barracuda stores the email. Our user logs into Barracuda website to retrieve the download if needed.
Yeah, as a user (either side) I hate that stuff. First, it isn't an email so I hate receiving that stuff because obviously it's just a web page with my files, it should be called that. Pretending it is email isn't cool. But also, it's a pain to use. I'm in email because I want email and I have secure email so that stuff like this never needs to happen. There is a reason why end users balk at that fake email marketing stuff.
-
@Dashrender said in POTS line replacement:
Of course that doesn't solve the sending issue. People just don't want to deal with scanning a document, then uploading to a service, then sending from that service, etc...
They want to walk to the machine choose from the address book and hit send.
Which only happens if you have paper already, start by solving that and that paper based machine gets super complicated.
-
@scottalanmiller said in POTS line replacement:
@Dashrender said in POTS line replacement:
Of course that doesn't solve the sending issue. People just don't want to deal with scanning a document, then uploading to a service, then sending from that service, etc...
They want to walk to the machine choose from the address book and hit send.
Which only happens if you have paper already, start by solving that and that paper based machine gets super complicated.
I can't demand other parties not use the forms they force on us. And I'm in no position to force the company to use another vendor who has better processes (and clearly most management won't either).
