What are your thoughts about HP Instant Ink?
-
@thanksaj said:
Depends on what you're printing. For 4x6 and 5x7, MUCH cheaper to send them out. However, you doing something like A3+, or 13x19 like I used to do, and it's cheaper to do them home...
Really? But then you need really expensive printers, right?
-
@dominica used to support Fuji printers used commercially.
-
@scottalanmiller said:
@thanksaj said:
Depends on what you're printing. For 4x6 and 5x7, MUCH cheaper to send them out. However, you doing something like A3+, or 13x19 like I used to do, and it's cheaper to do them home...
Really? But then you need really expensive printers, right?
Generally. The cheapest printer I've ever seen that does A3+ is between $200 and 300. A good one is $500+. That's full retail of course...
-
@thanksaj said:
Generally. The cheapest printer I've ever seen that does A3+ is between $200 and 300. A good one is $500+. That's full retail of course...
General business and home use does not print anything other than Letter or Legal (US sizing). So right off the bat here you are discussing a non-standard fringe case. That is an exception unto itself and is by no means what you should use to make general printer/ink decisions.
You are using very flawed logic to support your arguments
http://en.wikipedia.org/wiki/Paper_size#mediaviewer/File:A_size_illustration2_with_letter_and_legal.svg -
@JaredBusch said:
@thanksaj said:
Generally. The cheapest printer I've ever seen that does A3+ is between $200 and 300. A good one is $500+. That's full retail of course...
General business and home use does not print anything other than Letter or Legal (US sizing). So right off the bat here you are discussing a non-standard fringe case. That is an exception unto itself and is by no means what you should use to make general printer/ink decisions.
You are using very flawed logic to support your arguments
http://en.wikipedia.org/wiki/Paper_size#mediaviewer/File:A_size_illustration2_with_letter_and_legal.svgI never claimed the average user is printing A3+...
@thanksaj said:
Then again, most people don't print that size...or have the equipment to print that size...however, ask @NetworkNerdWifey about printing that size...it's addicting..
See??
-
But do you still support the purchasing of OEM only ink for normal home users considering the current paradigm?
-
@Dashrender said:
But do you still support the purchasing of OEM only ink for normal home users considering the current paradigm?
For the average home user, I won't deny that third-party is cheaper and can reflect serious cost savings. Personally, I'd still buy OEM. I've seen too many issues from 3rd party cartridges in my time in retail. It's a decision each person much make but I'd still buy OEM. But that's me.
-
@thanksaj said:
@Dashrender said:
But do you still support the purchasing of OEM only ink for normal home users considering the current paradigm?
For the average home user, I won't deny that third-party is cheaper and can reflect serious cost savings. Personally, I'd still buy OEM. I've seen too many issues from 3rd party cartridges in my time in retail. It's a decision each person much make but I'd still buy OEM. But that's me.
I can understand one's desire to stick by what they've seen, but when you can clearly see a substantial savings... but at least we're all on the same page now, I think
-
@Dashrender said:
@thanksaj said:
@Dashrender said:
But do you still support the purchasing of OEM only ink for normal home users considering the current paradigm?
For the average home user, I won't deny that third-party is cheaper and can reflect serious cost savings. Personally, I'd still buy OEM. I've seen too many issues from 3rd party cartridges in my time in retail. It's a decision each person much make but I'd still buy OEM. But that's me.
I can understand one's desire to stick by what they've seen, but when you can clearly see a substantial savings... but at least we're all on the same page now, I think
I won't deny that if you have 1 bad batch of ink that ruins a printer and it happens to be after 9 good batches that saved you a ton of money, that's fine. But what if that bad batch is on the first or second round? It can happen. OEM will always work. Is it possible to get a leaky cartridge or something with an OEM? Yes. But it's FAR more rare than remans or 3rd party cartridges. Most 3rd party cartridges are remans anyways, which is also why I won't use them.
For basic documents, etc, it's fine. But never use 3rd party in a photo printer being used for photos, or anything high quality...
-
@thanksaj said:
@Dashrender said:
@thanksaj said:
@Dashrender said:
But do you still support the purchasing of OEM only ink for normal home users considering the current paradigm?
For basic documents, etc, it's fine. But never use 3rd party in a photo printer being used for photos, or anything high quality...
Why do they use cheaper ink?
-
@IRJ said:
@thanksaj said:
@Dashrender said:
@thanksaj said:
@Dashrender said:
But do you still support the purchasing of OEM only ink for normal home users considering the current paradigm?
For basic documents, etc, it's fine. But never use 3rd party in a photo printer being used for photos, or anything high quality...
Why do they use cheaper ink?
The ink isn't typically up to snuff, but it also has to do with the cartridge itself. Most 3rd party cartridges are remans. They buy used up <insert brand here> cartridges and rework the chip on them and refill them with their own ink. Some ink is pretty close, other ink is not even in the parking lot of the rival's ballpark...it depends and it's completely luck of the draw figuring out which is good and which is bad...
The cartridges you buy for inkjets have a life built-in...after they use up the ink in them, the cartridge itself is generally pretty well shot too, not just out of ink. That's how they're designed. 3rd party basically takes something used up and broken and tries to make it work again. This is why 3rd party cartridges, as a rule, have so many issues and are so unreliable. OEM works because they are always new and always use what is best for that given make and model of machine.
The only exception to using 3rd party vs OEM is when you do things like print with edible ink, for cakes, etc. OEM doesn't make that, so 3rd party is the only way to go. That being said, most people know what they're getting into with that and are prepared for it...
-
@thanksaj said:
@Dashrender said:
But do you still support the purchasing of OEM only ink for normal home users considering the current paradigm?
For the average home user, I won't deny that third-party is cheaper and can reflect serious cost savings. Personally, I'd still buy OEM. I've seen too many issues from 3rd party cartridges in my time in retail. It's a decision each person much make but I'd still buy OEM. But that's me.
If you accept that it is cheaper, what's the reason that you would throw away money on the OEM? It feels like you are emotionally tied to the OEM vendors. You've figure out that third party is better in nearly all cases, but aren't willing to let go of the OEMs getting your money. You state that you've seen too many issues, but what does "too many" mean when in the sentence before you stated that third party was cheaper which means that the issues weren't too many since they were not enough to make it more expensive. I feel like there is a conflict in your thinking here.
-
@thanksaj said:
I won't deny that if you have 1 bad batch of ink that ruins a printer and it happens to be after 9 good batches that saved you a ton of money, that's fine. But what if that bad batch is on the first or second round? It can happen.
Wearing a seatbelt can kill you by trapping you in a burning car, it happens. It's rare. But, on average, wearing a seatbelt saves lives, a lot of them. You don't put your life at risk 99% of the time in the fear of surviving the one rare case where the seatbelt is what endangers you. Same here. You take the path that, on average, saves you money.
It's like Best Buy insurance. Everyone knows that it is a rip off. Sure, your equipment might die and it might have saved you, but on average it costs you an arm and a leg. You have to look at the average, not the fear factor.
Both crappy insurance and OEM ink rely on emotion and irrational thinking to make sales by scaring people into not doing the math. It doesn't matter if you get hit with your "bad ink" on the first or tenth time, it's the average over all ink that you ever buy that saves you the money. If you buy OEM ink, you are guaranteeing that you will lose, just not necessarily on day one.
-
@thanksaj said:
@IRJ said:
@thanksaj said:
@Dashrender said:
@thanksaj said:
@Dashrender said:
But do you still support the purchasing of OEM only ink for normal home users considering the current paradigm?
For basic documents, etc, it's fine. But never use 3rd party in a photo printer being used for photos, or anything high quality...
Why do they use cheaper ink?
The ink isn't typically up to snuff, but it also has to do with the cartridge itself. Most 3rd party cartridges are remans. They buy used up <insert brand here> cartridges and rework the chip on them and refill them with their own ink. Some ink is pretty close, other ink is not even in the parking lot of the rival's ballpark...it depends and it's completely luck of the draw figuring out which is good and which is bad...
The cartridges you buy for inkjets have a life built-in...after they use up the ink in them, the cartridge itself is generally pretty well shot too, not just out of ink. That's how they're designed. 3rd party basically takes something used up and broken and tries to make it work again. This is why 3rd party cartridges, as a rule, have so many issues and are so unreliable. OEM works because they are always new and always use what is best for that given make and model of machine.
The only exception to using 3rd party vs OEM is when you do things like print with edible ink, for cakes, etc. OEM doesn't make that, so 3rd party is the only way to go. That being said, most people know what they're getting into with that and are prepared for it...
The reasons why third party are bad aren't actually relevant and I think dwelling on them is what misleads you. At the end of the day it is the cost calculation and nothing else that matters. And that calculation appears to show that third party ink is the huge winner, no real room for error as it appears to win by a landslide financially. At least with the printers and ink in the examples. Looking into why third party ink fails is getting into details that are already included in the cost calculation so while it is a point of interest, it doesn't change the actual decision which showed that third party ink was cheaper - even when it fails more than usual.
-
@StrongBad Or compare it to the lotto. It's really the lottery in reverse. People will often play the lotto thinking "but I might get lucky" and one in a million really do get lucky, but you are more likely to be hit by falling airplane debris. The same with buying OEM ink. Sure, you might get lucky, but the odds are against you. The solid, rational decision is to not play the lotto at all and while you might not strike it rich you are guaranteed not to lose unnecessary money and the reality is that you were never going to actually win and never buy OEM ink because third party ink is cheap and mostly reliable. Playing the lott and buying OEM ink are betting against solid odds and yeah, someone might get lucky, but chances are it won't be you.
-
@StrongBad said:
@thanksaj said:
@IRJ said:
@thanksaj said:
@Dashrender said:
@thanksaj said:
@Dashrender said:
But do you still support the purchasing of OEM only ink for normal home users considering the current paradigm?
For basic documents, etc, it's fine. But never use 3rd party in a photo printer being used for photos, or anything high quality...
Why do they use cheaper ink?
The ink isn't typically up to snuff, but it also has to do with the cartridge itself. Most 3rd party cartridges are remans. They buy used up <insert brand here> cartridges and rework the chip on them and refill them with their own ink. Some ink is pretty close, other ink is not even in the parking lot of the rival's ballpark...it depends and it's completely luck of the draw figuring out which is good and which is bad...
The cartridges you buy for inkjets have a life built-in...after they use up the ink in them, the cartridge itself is generally pretty well shot too, not just out of ink. That's how they're designed. 3rd party basically takes something used up and broken and tries to make it work again. This is why 3rd party cartridges, as a rule, have so many issues and are so unreliable. OEM works because they are always new and always use what is best for that given make and model of machine.
The only exception to using 3rd party vs OEM is when you do things like print with edible ink, for cakes, etc. OEM doesn't make that, so 3rd party is the only way to go. That being said, most people know what they're getting into with that and are prepared for it...
The reasons why third party are bad aren't actually relevant and I think dwelling on them is what misleads you. At the end of the day it is the cost calculation and nothing else that matters. And that calculation appears to show that third party ink is the huge winner, no real room for error as it appears to win by a landslide financially. At least with the printers and ink in the examples. Looking into why third party ink fails is getting into details that are already included in the cost calculation so while it is a point of interest, it doesn't change the actual decision which showed that third party ink was cheaper - even when it fails more than usual.
To each their own. My inkjets have always been photo printers, so I stick to OEM.
-
@thanksaj said:
To each their own. My inkjets have always been photo printers, so I stick to OEM.
"To each their own" is another way of stating that you are avoiding rational thinking and are looking for a justification for it. It's a financial business decision, if there isn't a reason for OEM ink, why buy it? If you know that you are wasting money and getting nothing for it, why do it? There should be a reason for your decision making. If you are struggling to rationalize it, do some self reflection and look for "reverse rationalization" - the thing that the mind does when we make an emotional decision but the brain attempts to rationalize something, after the fact, that wasn't rational up front. It's a standard thing that all people do. You have to tackle it to learn to improve your own decision making processes.
Now if you are really doing nothing but photo printing, but is that the case? I tried this and it was insane. It was so expensive that I could do Walgreens for 10% of the price, even including the gas to drive there. It was several dollars per page to print at home with an HP Proto Printer.
-
A great book that talks about reverse rationalization and how humans make decisions faster than our brains can rationalize but, being human, we can't accept being non-rational and then faking rational thought after the fact is Predictably Irrational. I highly recommend it. It helped me to step back and recognize my own irrationality and accept that all people are irrational unless forced not to be and it really opened my eyes. Reading forums like this the amount that I see of people defending decisions that obviously had little thought into them in the first place with tons and tons of failed logic after the fact or just attempting to justify decisions that were made long ago because they won't accept that they could have made a bad decision was staggering.
It's helped me accept that I've made tons of bad decisions in the past. Tons and tons. But instead of denying them and covering them up I embrace them and learn not only to make better decisions, but to allow my brain to recognize emotionally driven decision making and circumvent it.
-
Another thing that the book taught me about was "middle" marketing. How you can give people fake, insane options on a product and "force" them to buy something they didn't want because it is better than something they obviously would never want. It was really interesting. To the point where they told a Harvard MBA class that they were going to do it and the irrational thinking in the class, even with warning, was so strong that they were still able to maneuver them with the tactic.
And also the idea of the endearment of "objects that we own." If you own a car today and are offered another car of equal value, in every way, nearly all people will passionately want to keep their existing car. It's an emotional thing. The car isn't better, but it is "ours." People do this with houses all of the time. Even when we get something equal or even a little better in return we experience a sense of loss over losing the old item even though it wasn't something we particularly liked. It makes people into hoarders and makes people make bad life decisions, especially around things like housing and investments. They think of those things as treasured possessions rather than as investments that need to maintain value.
-
@thanksaj said:
Then again, most people don't print that size...or have the equipment to print that size...however, ask @NetworkNerdWifey about printing that size...it's addicting..
Well I have yet to print that size at home.....
