Yealink Device Management Platform

JaredBusch

@DustinB3403 said in Yealink Device Management Platform:

Yeah, this worked well enough. I had no complaints with it. And since we're going full tilt with SfB I'll be looking to purchase a license for this.

Oh you were using it because of SfB? I guess I missed that part.

How hard was it to get a trial license?

DustinB3403

@JaredBusch said in Yealink Device Management Platform:

@DustinB3403 said in Yealink Device Management Platform:

Yeah, this worked well enough. I had no complaints with it. And since we're going full tilt with SfB I'll be looking to purchase a license for this.

Oh you were using it because of SfB? I guess I missed that part.

How hard was it to get a trial license?

You get a trial when you install it.

JaredBusch

@DustinB3403 said in Yealink Device Management Platform:

@JaredBusch said in Yealink Device Management Platform:

@DustinB3403 said in Yealink Device Management Platform:

Yeah, this worked well enough. I had no complaints with it. And since we're going full tilt with SfB I'll be looking to purchase a license for this.

Oh you were using it because of SfB? I guess I missed that part.

How hard was it to get a trial license?

You get a trial when you install it.

Well hopefully I won't be too drunk after D&D tonight to get something going.

JaredBusch

So for a SfB phone with no Yealink Device Management set up, this is all the phone has when dumped.


### This file is the exported MAC-all.cfg.

### For security, the following parameters with password haven't been display in this file.
###static.account.1.password = 
###static.account.sfb.1.password = 
features.power_saving.off_hour.idle_timeout = 5
features.power_saving.office_hour.idle_timeout = 15
phone_setting.inter_digit_time = 5
sfb.hot_desking.enable = 0
sip.btoe.enable = 0
sip.btoe.pairing_mode = 1
voice.handfree.spk_vol = 15
voice.handfree.tone_vol = 9
voice.ring_vol = 2
###  Static Configuration  ###
static.account.1.auth_name = [email protected]
static.account.1.codec.pcmu.priority = 1
static.account.1.codec.pcma.priority = 2
static.account.1.codec.g729.priority = 3
static.account.1.codec.g722.priority = 0
static.account.1.display_name = User Full Name
static.account.1.enable = 1
static.account.1.label = User Full Name
static.account.1.sip_server.1.address = domain.com
static.account.1.user_name = username
static.account.sfb.1.server = [email protected]
static.account.sfb.1.user_name = [email protected]
static.auto_provision.server.username = PlcmSpIp
static.features.device_update_auto.enable = 1
static.network.internet_port.gateway = 192.168.100.1
static.network.internet_port.ip = 192.168.100.222
static.network.internet_port.mask = 255.255.255.0
static.network.internet_port.type = 2
static.network.primary_dns = 192.168.1.200
static.phone_setting.phone_lock.lock_key_type = 10
static.voice_mail.number.1 = sip:[email protected];opaque=app:voicemail

JaredBusch

This thing requires 8 cores and 16GB RAM on CentOS 7.

My home KVM box doesn't have enough.. so look how bad it runs.

Constantly puking out of memory errors.

JaredBusch

But it did install

@scottalanmiller or @DustinB3403 add tag Yealink DMP or full name Yealink Device Management Platform

scottalanmiller

That's insanity.

travisdh1

@JaredBusch That's nuts!