EdgeRouter not handing out addresses on VLAN

JaredBusch

are you sure you have your switch setup right?

What is port 24 plugged into?

Which port were you plugged into with the manual config that worked?

Mike Davis

@jaredbusch Port 24 on the switch is plugged in to the EdgeRouter Eth1.

Mike Davis

@jaredbusch said in EdgeRouter not handing out addresses on VLAN:

Which port were you plugged into with the manual config that worked?

Same ports for everything.

JaredBusch

Keep the switch out of the picture.

Plug something into eth1 directly does it pull DHCP on vlan1?

Force that device to VLAN 80 and plug it in to eth1. Does it get the DHCP then?

JaredBusch

@mike-davis said in EdgeRouter not handing out addresses on VLAN:

@jaredbusch said in EdgeRouter not handing out addresses on VLAN:

Which port were you plugged into with the manual config that worked?

Same ports for everything.

That is not the correct answer.

Mike Davis

@jaredbusch good idea. Forgot I could force something to a VLAN.

Mike Davis

@jaredbusch said in EdgeRouter not handing out addresses on VLAN:

Plug something into eth1 directly does it pull DHCP on vlan1?
Force that device to VLAN 80 and plug it in to eth1. Does it get the DHCP then?

Did this and not getting an IP. Doing the old stare and compare with your config to see what is different.

JaredBusch

@mike-davis said in EdgeRouter not handing out addresses on VLAN:

@jaredbusch said in EdgeRouter not handing out addresses on VLAN:

Plug something into eth1 directly does it pull DHCP on vlan1?
Force that device to VLAN 80 and plug it in to eth1. Does it get the DHCP then?

Did this and not getting an IP. Doing the old stare and compare with your config to see what is different.

my LAN scope is disabled in that. It is only there for failover if the windows AD server with all the roles fails.

JaredBusch

You can also tell your switch to use VLAN 80 to get it's IP for management. not sure where. Notlogged into an ES atm.

Mike Davis

@jaredbusch said in EdgeRouter not handing out addresses on VLAN:

my LAN scope is disabled in that. It is only there for failover if the windows AD server with all the roles fails.

That explains this line:

set service dhcp-server shared-network-name FSL_LAN disable

What about this:

set service dhcp-server shared-network-name FSL_LAN authoritative disable

Mike Davis

@mike-davis said in EdgeRouter not handing out addresses on VLAN:

What about this:
set service dhcp-server shared-network-name FSL_LAN authoritative disable

That was it. Thanks @JaredBusch - you the man.