Exchange Online Migration From POP3
-
From your test machine, open a command prompt and type ping autodiscover.xyz.com does it resolve to outlook.xyz.com and then an IP?
-
@Dashrender said:
From your test machine, open a command prompt and type ping autodiscover.xyz.com does it resolve to outlook.xyz.com and then an IP?
Still points to the POP3...assuming it is still propagating...though I thought the SRV records would be updated by now...
-
@Dashrender said:
@scottalanmiller said:
As always I highly recommend that DNS not be tied to a Registrar. The system is designed to protect you and putting the two together eliminates a critical separation of duties.
Given that better DNS providers are free, why use the registrar?
My recommendation is CloudFlare.
I'm only working toward moving DNS back to his registrar for simplicity - I do understand your point on the separation.
No simpler. More complex most likely. CloudFlare is so easy and has such a nice interface.
-
@garak0410 said:
@Dashrender said:
@JaredBusch said:
@garak0410 said:
And it is OK to proceed with CloudFlare now or better to wait until this evening?
If everything is imported matching the POP3 provider, I would just do it now. because it will be transparent.
Agreed, as long as the settings are all the same, computers on the internet won't really see a difference.
I noticed CloudFlare did not bring over autoconfig and autodiscover of the POP3 provider DNS settings...will add those with my autodiscover for O365.
DNS can't be completely auto-discovered. Always some manual bits unless you have nothing but email and www records.
-
@garak0410 said:
Wondering if I should make the name autodiscover.outlook.com as well as the value, since I already have that autodiscover....or will that not work?
Only use the identical entry to what Microsoft provides.
-
@garak0410 said:
@Dashrender said:
@garak0410 said:
I had to manually enter the autodiscover info from the existing POP3 provider into CloudFlare because it didn't carry over...did that...went to add the O365 AutoDiscover info and that's when I got the error...
And both were entered autodiscover.domainname.com
OK hold on a second.. was there an autodiscover record in your old POP3 CP? was it something like A record Autodiscover xxx.xxx.xxx.xxx?
If so, you can't have two records with the same name. That old autodiscover record points to your old POP3 setup... You'll need to delete that record and create a new CNAME pointing to the one provided by O365.
Correct...I brought over the old Autodiscover pointing to POP3...so it is safe to delete, add O365 and we can still receive POP3? And thanks for the patience...would rather be safe....
Yes. Necessary to delete the old, incorrect records.
-
Gonna move to another project for a short bit while I wait on propagation...just kind of excited to be close to the client end of this...
-
For reference, this is the screen I am looking at on 0365...it found these entries at first but can't see them now:
-
O365 will fail the MX record check obviously until you change it.
You don't need to worry about this page until you are ready to switch the MX record.
From your test machine if when you ping autodiscover.companyname.com you get autodiscover.outlook.com then an IP address (if it doesn't specifically say autodiscover.outlook.com then just ping autodiscover.outlook.com and the IP's should be close if not identical - round robin DNS could give you a different address, but I would expect them to be somewhat close in range (though there is no reason for this to be the case - something I know Scott might point out))
-
@Dashrender said:
O365 will fail the MX record check obviously until you change it.
You don't need to worry about this page until you are ready to switch the MX record.
From your test machine if when you ping autodiscover.companyname.com you get autodiscover.outlook.com then an IP address (if it doesn't specifically say autodiscover.outlook.com then just ping and the IP's should be close if not identical - round robin DNS could give you a different address, but I would expect them to be somewhat close in range (though there is no reason for this to be the case - something I know Scott might point out))
Right...I was just wondering why I couldn't connect to Lync even and with it showing "X" on this page, made me wonder about the propagation.
Pinging autodiscover.companyname.com still goes to the IP that was associated with my POP3...pinging autodiscover.outlook.com brings up autodiscover-namsouth.outlook.com and a 157. IP address...
-
Tom Petty's "The Waiting" just keeps going through my head as I wait to do more with this...at a standstill right now...
-
This could be why I am either confused or impatient...I see this screen shows where Lync and other O365 services are fine on the DNS...
Yet that other screen shot I provided shows problems with Lync...I thought I could actually test Lync right now...
Also, if I proceed with setting up the clients, what is the email server name that I use? Just mail.domainame.com? Outlook.domainname.com? I thought I had asked that question but couldn't remember...and didn't find much help online...
-
What is your PC using for DNS? I assume one of your AD servers, what are they using for DNS upstream resolution?
Try clearing the cache on your server, that might make it find the new internet DNS server faster.
-
Since O365 is now seeing the correct information for DNS records regarding Lync, once your PC does as well, it should work.
-
@Dashrender said:
What is your PC using for DNS? I assume one of your AD servers, what are they using for DNS upstream resolution?
Try clearing the cache on your server, that might make it find the new internet DNS server faster.
@Dashrender said:
Since O365 is now seeing the correct information for DNS records regarding Lync, once your PC does as well, it should work.
Yes...our Domain Controller is also our DNS server...it still pings to the old autodiscover...and also did a test account setup in outlook for auto discovery and it still attempted to go back to the POP3.
I just tried the Lync app on my phone via a 4G connection...can't find the server...so goes beyond our network?
-
Since chat is broken here, hit me up on google chat
dashrender @ gmail dot cm
yes the o is missing from com to keep the scammers at a bit of bay
-
Looks like MS will be doing a webinar for free next Tuesday.
http://www.microsoftvirtualacademy.com/liveevents/getting-the-most-out-of-your-office-365-trial
I think I'm going to try to attend myself.
-
Good Morning...
I woke up this morning, tried Lync on my phone and Wi-Fi connection with my main email and it worked...guess it was propagation. Got to work and after a few failed sign in attempts, was able to sign into Lync...looks like some major progress can be made today.
-
You were able to add O365 to your account following either Jared's or my instructions?
Just wondering, which are you doing?
-
@Dashrender said:
You were able to add O365 to your account following either Jared's or my instructions?
Just wondering, which are you doing?
I did some Lync accounts first...came into several "fires" I had to put out. I just added my O365 account with autodiscover and it works. So, currently, I have my POP3 and O365 account now in Outlook. I can get this set up for the rest of my users now and then, as you suggested, do the rest tomorrow night.
