What Are You Doing Right Now
-
@Minion-Queen said in What Are You Doing Right Now:
@dafyre said in What Are You Doing Right Now:
@Minion-Queen said in What Are You Doing Right Now:
He had a 3000# concrete form fall on his foot just before Christmas. He is out of work, can't play and has months of recovery and multiple surgeries to go. So we are doing our best to raise some $$ for him and his girlfriend to cover lost income for the next few months.
Owch! No Workman's comp?
yeah but 1/4 of his normal income
*whistles* I didn't realize that it would be like that.
-
@Minion-Queen said in What Are You Doing Right Now:
@dafyre said in What Are You Doing Right Now:
@Minion-Queen said in What Are You Doing Right Now:
He had a 3000# concrete form fall on his foot just before Christmas. He is out of work, can't play and has months of recovery and multiple surgeries to go. So we are doing our best to raise some $$ for him and his girlfriend to cover lost income for the next few months.
Owch! No Workman's comp?
yeah but 1/4 of his normal income
Sadly the expectation of people is that they should sustain their lives on 1/4 of what they actually earn, and be banking the rest of it.
I can chip in 5 bucks (just need a way to get it over to you)
-
@RojoLoco said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
After lunch, the virtualization project begins! I think I have everything set to get the hyper v 2016 installed to a USB. Still waiting on drives and RAMs, but I might as well get going.
OH, is that now supported through documentation outside of OEMs?
I'm not sure, but I know how to find out. I saw an older thread on SW where @scottalanmiller and @Dashrender were discussing the pitfalls of installing hyper v to USB or SD... I find an article showing how to do it w hyper v 2016, so we will see.
We've had that same discussion here, along with @brrrbill but it was around XenServer and how challenging it is to get the logs saved to another location and never writing on the SD card.
I have a feeling I'll be putting a couple of drives in a RAID 1 for the hypervisor. Or would I be better off going OBR10 and a small partition?
OBR10 and a small partition. Hypervisors are very light on IOPS, and what few they do require is almost all reads on boot.
Now if only XS7 would play nice with those log files
-
Sadly they were barely making ends meet on full income with both of them. So this is a HUGE issue for them.
-
@travisdh1 said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
After lunch, the virtualization project begins! I think I have everything set to get the hyper v 2016 installed to a USB. Still waiting on drives and RAMs, but I might as well get going.
OH, is that now supported through documentation outside of OEMs?
I'm not sure, but I know how to find out. I saw an older thread on SW where @scottalanmiller and @Dashrender were discussing the pitfalls of installing hyper v to USB or SD... I find an article showing how to do it w hyper v 2016, so we will see.
We've had that same discussion here, along with @brrrbill but it was around XenServer and how challenging it is to get the logs saved to another location and never writing on the SD card.
I have a feeling I'll be putting a couple of drives in a RAID 1 for the hypervisor. Or would I be better off going OBR10 and a small partition?
OBR10 and a small partition. Hypervisors are very light on IOPS, and what few they do require is almost all reads on boot.
Now if only XS7 would play nice with those log files
Ah, good info. Thanks. Wish I could be helpful w the XS7 stuff, but that's out of my wheelhouse.
-
@RojoLoco said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
After lunch, the virtualization project begins! I think I have everything set to get the hyper v 2016 installed to a USB. Still waiting on drives and RAMs, but I might as well get going.
OH, is that now supported through documentation outside of OEMs?
I'm not sure, but I know how to find out. I saw an older thread on SW where @scottalanmiller and @Dashrender were discussing the pitfalls of installing hyper v to USB or SD... I find an article showing how to do it w hyper v 2016, so we will see.
We've had that same discussion here, along with @brrrbill but it was around XenServer and how challenging it is to get the logs saved to another location and never writing on the SD card.
I have a feeling I'll be putting a couple of drives in a RAID 1 for the hypervisor. Or would I be better off going OBR10 and a small partition?
OBR10 and small partition.
If your server supports an internal SSD (normally m.2) you could install Hyper-V to that, and use the RAID'ed drives as normal.
-
@Minion-Queen :frowning2:
-
-
Yeah his girlfriend has 2 kids living with them. He has a son as well. So money doesn't go as far as they would like. And while his medical bills are paid for. There are lots of other costs associated with being injured so....
-
@Dashrender said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
After lunch, the virtualization project begins! I think I have everything set to get the hyper v 2016 installed to a USB. Still waiting on drives and RAMs, but I might as well get going.
OH, is that now supported through documentation outside of OEMs?
I'm not sure, but I know how to find out. I saw an older thread on SW where @scottalanmiller and @Dashrender were discussing the pitfalls of installing hyper v to USB or SD... I find an article showing how to do it w hyper v 2016, so we will see.
We've had that same discussion here, along with @brrrbill but it was around XenServer and how challenging it is to get the logs saved to another location and never writing on the SD card.
I have a feeling I'll be putting a couple of drives in a RAID 1 for the hypervisor. Or would I be better off going OBR10 and a small partition?
OBR10 and small partition.
If your server supports an internal SSD (normally m.2) you could install Hyper-V to that, and use the RAID'ed drives as normal.
I'll check on the m.2 slot, that might be the way to go.
-
@Minion-Queen said in What Are You Doing Right Now:
Yeah his girlfriend has 2 kids living with them. He has a son as well. So money doesn't go as far as they would like. And while his medical bills are paid for. There are lots of other costs associated with being injured so....
Yeah, I just paid off a major one of those from when my wife passed 4 years ago. All the medical expenses were taken care of, but you still have to eat, pay the mortgage, etc.
-
Just got our FireTV hooked up.
-
@travisdh1 said in What Are You Doing Right Now:
@Minion-Queen said in What Are You Doing Right Now:
Yeah his girlfriend has 2 kids living with them. He has a son as well. So money doesn't go as far as they would like. And while his medical bills are paid for. There are lots of other costs associated with being injured so....
Yeah, I just paid off a major one of those from when my wife passed 4 years ago. All the medical expenses were taken care of, but you still have to eat, pay the mortgage, etc.
Exactly! So that's why we are home from TX early and why we are doing the benefit, to help him out!
-
@RojoLoco said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
After lunch, the virtualization project begins! I think I have everything set to get the hyper v 2016 installed to a USB. Still waiting on drives and RAMs, but I might as well get going.
OH, is that now supported through documentation outside of OEMs?
I'm not sure, but I know how to find out. I saw an older thread on SW where @scottalanmiller and @Dashrender were discussing the pitfalls of installing hyper v to USB or SD... I find an article showing how to do it w hyper v 2016, so we will see.
We've had that same discussion here, along with @brrrbill but it was around XenServer and how challenging it is to get the logs saved to another location and never writing on the SD card.
I have a feeling I'll be putting a couple of drives in a RAID 1 for the hypervisor. Or would I be better off going OBR10 and a small partition?
OBR10 and small partition is the way to go.
-
@scottalanmiller said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
After lunch, the virtualization project begins! I think I have everything set to get the hyper v 2016 installed to a USB. Still waiting on drives and RAMs, but I might as well get going.
OH, is that now supported through documentation outside of OEMs?
I'm not sure, but I know how to find out. I saw an older thread on SW where @scottalanmiller and @Dashrender were discussing the pitfalls of installing hyper v to USB or SD... I find an article showing how to do it w hyper v 2016, so we will see.
We've had that same discussion here, along with @brrrbill but it was around XenServer and how challenging it is to get the logs saved to another location and never writing on the SD card.
I have a feeling I'll be putting a couple of drives in a RAID 1 for the hypervisor. Or would I be better off going OBR10 and a small partition?
OBR10 and small partition is the way to go.
Then that's the plan. I will probably install to these 2 spare drives to test, if successful then I'll make an image and then restore to the small partition.
Am I way off base by ordering 8x 1.2TB / 10k rpm / 2.5" drives to fill this box? They were the biggest/fastest SAS drives I could find. That would give 4.8TB in a RAID10.
-
Also, @scottalanmiller, how small should the hypervisor partition be? 20-30gb?
I should start a thread....
-
@RojoLoco said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
After lunch, the virtualization project begins! I think I have everything set to get the hyper v 2016 installed to a USB. Still waiting on drives and RAMs, but I might as well get going.
OH, is that now supported through documentation outside of OEMs?
I'm not sure, but I know how to find out. I saw an older thread on SW where @scottalanmiller and @Dashrender were discussing the pitfalls of installing hyper v to USB or SD... I find an article showing how to do it w hyper v 2016, so we will see.
We've had that same discussion here, along with @brrrbill but it was around XenServer and how challenging it is to get the logs saved to another location and never writing on the SD card.
I have a feeling I'll be putting a couple of drives in a RAID 1 for the hypervisor. Or would I be better off going OBR10 and a small partition?
OBR10 and small partition is the way to go.
Then that's the plan. I will probably install to these 2 spare drives to test, if successful then I'll make an image and then restore to the small partition.
Am I way off base by ordering 8x 1.2TB / 10k rpm / 2.5" drives to fill this box? They were the biggest/fastest SAS drives I could find. That would give 4.8TB in a RAID10.
You're asking the wrong question - or rather looking at it wrong.
What will this box do? what is needed?
Perhaps you need 8 SSDs in RAID 10 because of your IOP load, perhaps you only need 2 drives in RAID 1, again because of IOP load.
Granted a VM host is definitely much harder to know what you need outside the current expected workload, if there is assumed room for growth on that same host.
-
@RojoLoco said in What Are You Doing Right Now:
Also, @scottalanmiller, how small should the hypervisor partition be? 20-30gb?
I should start a thread....
Pretty small generally, but Hyper-V 2016 I'm not sure.
-
@Dashrender said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
@scottalanmiller said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
@Dashrender said in What Are You Doing Right Now:
@RojoLoco said in What Are You Doing Right Now:
After lunch, the virtualization project begins! I think I have everything set to get the hyper v 2016 installed to a USB. Still waiting on drives and RAMs, but I might as well get going.
OH, is that now supported through documentation outside of OEMs?
I'm not sure, but I know how to find out. I saw an older thread on SW where @scottalanmiller and @Dashrender were discussing the pitfalls of installing hyper v to USB or SD... I find an article showing how to do it w hyper v 2016, so we will see.
We've had that same discussion here, along with @brrrbill but it was around XenServer and how challenging it is to get the logs saved to another location and never writing on the SD card.
I have a feeling I'll be putting a couple of drives in a RAID 1 for the hypervisor. Or would I be better off going OBR10 and a small partition?
OBR10 and small partition is the way to go.
Then that's the plan. I will probably install to these 2 spare drives to test, if successful then I'll make an image and then restore to the small partition.
Am I way off base by ordering 8x 1.2TB / 10k rpm / 2.5" drives to fill this box? They were the biggest/fastest SAS drives I could find. That would give 4.8TB in a RAID10.
You're asking the wrong question - or rather looking at it wrong.
What will this box do? what is needed?
Perhaps you need 8 SSDs in RAID 10 because of your IOP load, perhaps you only need 2 drives in RAID 1, again because of IOP load.
Granted a VM host is definitely much harder to know what you need outside the current expected workload, if there is assumed room for growth on that same host.
Currently, this is simply a test environment / proof of concept for virtualizing our infrastructure, etc. Since I'm not sure exactly which current machines will get the P2V treatment, I'm not sure about IOPs. I have the link to the "how to measure IOPs in Windows" article, but I don't know what to run it on (we have an embarrassing number of physical machines). So for this box, I want maximum local storage while remaining somewhat cost efficient. So no flash yet. I have to show the bosses that these existing servers can be run virtually until they can be migrated to newer OSes or absorbed and decommissioned. They will buy 8 drives for this box before they will buy an HBA to connect to the gi-normous DAS storage box we have. Hopefully, the ability to virtualize will dazzle them into giving me the right number of physical hosts to run all (or most) of our current servers, and at that point I will be allocated a chunk of the ~80TB storage monster. But for now, I have an R430 with 8 drive bays that will house a number of different VHDs before we roll out a real solution.
-
Since it's a test box, why not just purchase a SSD or two, unless you need a ton of storage for testing?
