Weird telnet Issue
-
You want to know what's even weirder?! If I SSH into my box, while I'm ON that box (ssh 127.0.0.1), I can start a telnet session without any sort of delay.
What...the...heck???
-
Super strange.. Some super weird routing issue?
Capture it with and without a delay and see for any differences?
-
@anthonyh said in Weird telnet Issue:
@travisdh1 I always use the IP, so DNS should be out of the mix. SSH does not have this issue.
It doesn't matter if you go by IP, the daemon will still try to resolve your IP to host. I'd check to see if there's a configuration issue, seeing how DNS look ups can be turned off for sshd, I imagine that's true with telnetd as well, and that may be why you're having the problem with telnet, but not ssh. As far as machines go, depending on subnets and further configuration, as well as DNS server response/cache time (many people forget to add forwarders and only use the root ones, making it all slow), this could also make the issue only happen with certain machines, but not with others.
-
Maybe it is a bit of coincidence and really there is a DNS round robin involved.
-
Here is where I'm boggled that I think some are missing...
If I am using telnet directly on my workstation, I get a 10 or so second delay before the session starts.
If I SSH into my workstation, then use telnet, the session starts instantly.
If I SSH into my workstation, from my workstation (e.g. ssh 127.0.0.1), then use telnet, the session starts instantly.
What would an SSH session change to remove the delay?
-
@anthonyh said in Weird telnet Issue:
Here is where I'm boggled that I think some are missing...
If I am using telnet directly on my workstation, I get a 10 or so second delay before the session starts.
If I SSH into my workstation, then use telnet, the session starts instantly.
If I SSH into my workstation, from my workstation (e.g. ssh 127.0.0.1), then use telnet, the session starts instantly.
What would an SSH session change to remove the delay?
Have you checked the DNS lookup configuration for sshd_config? Because 127.0.0.1 is in the hosts file so there is no look up time, ditto with telnetd.
This delay issue is almost always related to DNS queries, with very few exceptions. It doesn't matter what machine you are coming from or going to, if the "remote" machine doesn't have your connecting IP in its hosts file and it's configured to look up the host, you'll get a delay, especially with slow DNS queries, typically that 10 seconds means it probably timed out the request.
-
That makes sense, but I still don't understand how an SSH session changes the behavior of telnet. Wouldn't be the same as if I'm executing telnet on the workstation itself?
-
@anthonyh said in Weird telnet Issue:
That makes sense, but I still don't understand how an SSH session changes the behavior of telnet. Wouldn't be the same as if I'm executing telnet on the workstation itself?
When you go through SSH and execute in the shell, it's probably using a different connecting IP, I'd check that to see if you're getting the same result. Plus also you could just do:
Edit /etc/ssh/sshd_config
Change UseDNS to No
restart sshd
And I haven't used telnetd in about 15 years, but a potential solution, which may or may not work any more or for Fedora (I mostly use FreeBSD):
Edit /etc/hosts.allow
Add to a new line:
in.telnetd: ALLRestart via inetd or xinetd or whatever you're using, unless it has its own service controller. Telnet is pretty much obsolete because it's plaintext.
-
This post is deleted! -
Hmm. Something I just discovered is that even running "telnet --help" gives me the exact same delay.
