Quick LSI RAID Question
-
@scottalanmiller darn so my only real choice to use over 2TB on my RAID volume is to upgrade my server or split the boot drive off the RAID?
-
@Brains said in Quick LSI RAID Question:
Reason being, my motherboard isnt UEFI, and I need to have over 2TB addressable on my file server partition. My understanding is that GPT disk can't boot without UEFI, but Windows can use GPT disks without UEFI as long as it is not the boot volume.
Windows shouldn't see the storage directly from the RAID card, however. Let your hypervisor do its job and abstract this away so even if the LSI card cannot do this, it won't matter to your Windows VM.
-
@Brains said in Quick LSI RAID Question:
@scottalanmiller darn so my only real choice to use over 2TB on my RAID volume is to upgrade my server or split the boot drive off the RAID?
I was too slow on the virtualization post. It's your hypervisor's job to handle this, not the OS.
-
@scottalanmiller unfortunately no VMs in this conversation. IT Director is opposed to virtualization
-
@Brains said in Quick LSI RAID Question:
@scottalanmiller unfortunately no VMs in this conversation. IT Director is opposed to virtualization
Then the IT Director is your technological failure in this instance. Windows isn't suppose to handle this situation and neither is the LSI. There is a layer meant to handle this and it's meant to be there every time. Unfortunately, your choices are bandaid it by doing something like adding extra drives, not using Windows as your OS or buying a different RAID controller or fix the actual problem and run it by the CEO that your director isn't capable of making technical decisions, is wasting company resources on a personal mission and is putting the company at risk without benefit.
-
Unfortunately, in this day and age, all enterprise class systems, like LSI RAID and Windows, have been assuming virtualization for so long that there really are no accommodations for systems without the proper abstraction layer. There are, of course, very special cases where you need to be physical with an install but they are less than .01% of all installs and are so unique that this would not be a real issue and would almost never involved Windows as the OS (only really large use case for this is low latency systems and Windows isn't capable of doing that.) So no vendor on either side of the equation addresses this because the problem doesn't actually exist, for all intents and purposes.
-
Of the remaining insanely unlikely physical Windows install necessities, you also can rule out any that don't need super large disks and any that boot from SAN (which is essentially all in the enterprise space.) So put that all together and the need for this just gets to be so nominal that in the rare remaining case, you just buy extra hardware to work around it.
-
@Brains said in Quick LSI RAID Question:
@scottalanmiller unfortunately no VMs in this conversation. IT Director is opposed to virtualization
I know it's to late now, but that's a "Thanks for taking the time to interview me, but I doubt I'll be accepting the position." if they're not willing to budge in the interview process.
-
Even though the RAID controller won't provide the partitions for you, does that matter? Assuming that the OS will see the entire 5 TB partition, Windows should allow you to create a 350 GB boot partition that you install Windows to, then format the rest as GPT and call it a night.
-
@Dashrender said in Quick LSI RAID Question:
Even though the RAID controller won't provide the partitions for you, does that matter? Assuming that the OS will see the entire 5 TB partition, Windows should allow you to create a 350 GB boot partition that you install Windows to, then format the rest as GPT and call it a night.
It wont work. Windows cant boot to a GPT disk if there is no UEFI motherboard installed. Im going to just add a couple more disks and setup disks as the boot volume. Then use GPT on the existing 5TB volume.
My next problem is to figure out how to get this card to allow me to connect 6 drives in the cheapest, most efficient way possible while not sacrificing performance. I have a SF8087->4 SATA connector breakout cable right now. Sounds simple, huh?
-
@Brains said in Quick LSI RAID Question:
@Dashrender said in Quick LSI RAID Question:
Even though the RAID controller won't provide the partitions for you, does that matter? Assuming that the OS will see the entire 5 TB partition, Windows should allow you to create a 350 GB boot partition that you install Windows to, then format the rest as GPT and call it a night.
It wont work. Windows cant boot to a GPT disk if there is no UEFI motherboard installed. Im going to just add a couple more disks and setup disks as the boot volume. Then use GPT on the existing 5TB volume.
Yeah, sadly no simple work around without the extra disks or a SAN to provide a boot LUN.
-
@Brains said in Quick LSI RAID Question:
@Dashrender said in Quick LSI RAID Question:
Even though the RAID controller won't provide the partitions for you, does that matter? Assuming that the OS will see the entire 5 TB partition, Windows should allow you to create a 350 GB boot partition that you install Windows to, then format the rest as GPT and call it a night.
It wont work. Windows cant boot to a GPT disk if there is no UEFI motherboard installed. Im going to just add a couple more disks and setup disks as the boot volume. Then use GPT on the existing 5TB volume.
My next problem is to figure out how to get this card to allow me to connect 6 drives in the cheapest, most efficient way possible while not sacrificing performance. I have a SF8087->4 SATA connector breakout cable right now. Sounds simple, huh?
You need a port multiplier to connect more than 4 drives with that card. (Marvell 9715 chipset is the one I know is used by Backblaze. Not exactly the greatest storage setup, but it'll work.)
-
You could make a big array, then when youre installing windows make a 350GB partition for the windows install, then use the rest as another disk(data i guess) for that server.
-
@momurda said in Quick LSI RAID Question:
You could make a big array, then when youre installing windows make a 350GB partition for the windows install, then use the rest as another disk(data i guess) for that server.
Doesnt work. Windows sees the single RAID volume as 1 "disk" and since that disk has over 2TB partition, it has to be GPT. Per SWJ, I cant create 2 volumes on the same raid array
Thanks for the help though
-
@travisdh1 said in Quick LSI RAID Question:
@Brains said in Quick LSI RAID Question:
@Dashrender said in Quick LSI RAID Question:
Even though the RAID controller won't provide the partitions for you, does that matter? Assuming that the OS will see the entire 5 TB partition, Windows should allow you to create a 350 GB boot partition that you install Windows to, then format the rest as GPT and call it a night.
It wont work. Windows cant boot to a GPT disk if there is no UEFI motherboard installed. Im going to just add a couple more disks and setup disks as the boot volume. Then use GPT on the existing 5TB volume.
My next problem is to figure out how to get this card to allow me to connect 6 drives in the cheapest, most efficient way possible while not sacrificing performance. I have a SF8087->4 SATA connector breakout cable right now. Sounds simple, huh?
You need a port multiplier to connect more than 4 drives with that card. (Marvell 9715 chipset is the one I know is used by Backblaze. Not exactly the greatest storage setup, but it'll work.)
Thanks Travis! I looked around and couldnt really find one with that chipset. Do you have any other recommendations? Also what is the performance impact of using the port multiplier card?
I see good reviews for a company "IO Crest" on Amazon. Anyone heard of them before? I can order through Insight if anyone has a good recommended card that isnt available on consumer sites.
-
@Brains said in Quick LSI RAID Question:
@travisdh1 said in Quick LSI RAID Question:
@Brains said in Quick LSI RAID Question:
@Dashrender said in Quick LSI RAID Question:
Even though the RAID controller won't provide the partitions for you, does that matter? Assuming that the OS will see the entire 5 TB partition, Windows should allow you to create a 350 GB boot partition that you install Windows to, then format the rest as GPT and call it a night.
It wont work. Windows cant boot to a GPT disk if there is no UEFI motherboard installed. Im going to just add a couple more disks and setup disks as the boot volume. Then use GPT on the existing 5TB volume.
My next problem is to figure out how to get this card to allow me to connect 6 drives in the cheapest, most efficient way possible while not sacrificing performance. I have a SF8087->4 SATA connector breakout cable right now. Sounds simple, huh?
You need a port multiplier to connect more than 4 drives with that card. (Marvell 9715 chipset is the one I know is used by Backblaze. Not exactly the greatest storage setup, but it'll work.)
Thanks Travis! I looked around and couldnt really find one with that chipset. Do you have any other recommendations? Also what is the performance impact of using the port multiplier card?
I see good reviews for a company "IO Crest" on Amazon. Anyone heard of them before? I can order through Insight if anyone has a good recommended card that isnt available on consumer sites.
They don't actually say on the blog page. I haven't actually used any myself, but you do have one options that I found.
Amazon 1 to 5 port.Next time I'd just get a card that has enough ports on it already, or a server case that included the needed backplane.
Performance wise, you will only get a max of 6Gb/s per port, no matter how many drives are connected to the port.
-
@travisdh1 said in Quick LSI RAID Question:
@Brains said in Quick LSI RAID Question:
@travisdh1 said in Quick LSI RAID Question:
@Brains said in Quick LSI RAID Question:
@Dashrender said in Quick LSI RAID Question:
Even though the RAID controller won't provide the partitions for you, does that matter? Assuming that the OS will see the entire 5 TB partition, Windows should allow you to create a 350 GB boot partition that you install Windows to, then format the rest as GPT and call it a night.
It wont work. Windows cant boot to a GPT disk if there is no UEFI motherboard installed. Im going to just add a couple more disks and setup disks as the boot volume. Then use GPT on the existing 5TB volume.
My next problem is to figure out how to get this card to allow me to connect 6 drives in the cheapest, most efficient way possible while not sacrificing performance. I have a SF8087->4 SATA connector breakout cable right now. Sounds simple, huh?
You need a port multiplier to connect more than 4 drives with that card. (Marvell 9715 chipset is the one I know is used by Backblaze. Not exactly the greatest storage setup, but it'll work.)
Thanks Travis! I looked around and couldnt really find one with that chipset. Do you have any other recommendations? Also what is the performance impact of using the port multiplier card?
I see good reviews for a company "IO Crest" on Amazon. Anyone heard of them before? I can order through Insight if anyone has a good recommended card that isnt available on consumer sites.
They don't actually say on the blog page. I haven't actually used any myself, but you do have one options that I found.
Amazon 1 to 5 port.Next time I'd just get a card that has enough ports on it already, or a server case that included the needed backplane.
Performance wise, you will only get a max of 6Gb/s per port, no matter how many drives are connected to the port.
Thanks. Unfortunately this is an upgrade instead of new build, so buying a $4-500 replacement card wasnt needed untill I ran into these GPT problems.
I am open to purchasing a new case w/ backplane if anyone has any good suggestions.
-
Is this a custom server? Never saw a model number mentioned.
-
A newer motherboard with uefi would be cheaper than a newer rackmount case with backplane. cases like that worth buying cost $500.
-
@tiagom said in Quick LSI RAID Question:
Is this a custom server? Never saw a model number mentioned.
yea its custom build using an Antec 900 Case
