NAS or SAM-SD?
-
@coliver said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@wirestyle22 said in NAS or SAM-SD?:
Is a SAM-SD a Software Defined Network that is Scott Alan Miller compliant?
All an enterprise NAS is is a SAM-SD that someone built as a black box for you
If someone were to build a white box, or maybe a green box, would that still be compliant?
A white box device cannot be a NAS. Blackbox is part of the definition of a NAS.
White boxes cannot be enterprise (no support) so doesn't qualify as SAM-SD. That would just be a hobby class file server.
SAM-SD still requires enterprise hardware and support, but does not allow for black boxing as that is what it replaces.
So I'm 100% clear (my post was sarcasm if you didn't pick up on that, but there was a good point about white boxes I'll take note of), black boxes have parts that individually have enterprise support? Your RAID controller has support from one vendor, the main board has support from another vendor, and so on. Whereas a white box has zero support whatsoever?
You'll rarely get enterprise support from a RAID card vendor. If you have an issue and request a replacement it can take weeks to get them. Whereas buying from HP or Dell you can get parts in as little as 4 hours.
FAR less than four hours. I can get replacement parts in as little as fifteen minutes installed with HP.
-
@dafyre said in NAS or SAM-SD?:
The main concern is for this to be a place for a department to store photos... One place... not 10 individual 1TB drives.
I've already done some price checking, and building a SAM-SD comes in at about half the price of a Synology for similar sizes going by straight up list prices... and this includes the 3 year NBD parts warranty from xByte.
For such a tiny project, why not get a two bay Synology and two RAID 10 drives in RAID 1. Or a four bay with four 6TB drives in RAID 10. These will be really cheap, cheaper than you can do a SAM-SD.
-
The limitation on a SAM-SD is that you need enterprise gear, and enterprise gear has costs associated with it. But at 10TB you are not yet into the category of using rack mount gear unless reliability warrants it. And for photo storage, why go even that far?
Desktop units, because they are non-enterprise class, go cheaper than SAM-SDs can go because only non-enterprise gear has that form factor. So SMB class Synology or ReadyNAS are your cost performers here.
-
@scottalanmiller said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@wirestyle22 said in NAS or SAM-SD?:
Is a SAM-SD a Software Defined Network that is Scott Alan Miller compliant?
All an enterprise NAS is is a SAM-SD that someone built as a black box for you
If someone were to build a white box, or maybe a green box, would that still be compliant?
A white box device cannot be a NAS. Blackbox is part of the definition of a NAS.
White boxes cannot be enterprise (no support) so doesn't qualify as SAM-SD. That would just be a hobby class file server.
SAM-SD still requires enterprise hardware and support, but does not allow for black boxing as that is what it replaces.
So I'm 100% clear (my post was sarcasm if you didn't pick up on that, but there was a good point about white boxes I'll take note of), black boxes have parts that individually have enterprise support? Your RAID controller has support from one vendor, the main board has support from another vendor, and so on. Whereas a white box has zero support whatsoever?
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@wirestyle22 said in NAS or SAM-SD?:
Is a SAM-SD a Software Defined Network that is Scott Alan Miller compliant?
All an enterprise NAS is is a SAM-SD that someone built as a black box for you
If someone were to build a white box, or maybe a green box, would that still be compliant?
A white box device cannot be a NAS. Blackbox is part of the definition of a NAS.
White boxes cannot be enterprise (no support) so doesn't qualify as SAM-SD. That would just be a hobby class file server.
SAM-SD still requires enterprise hardware and support, but does not allow for black boxing as that is what it replaces.
So I'm 100% clear (my post was sarcasm if you didn't pick up on that, but there was a good point about white boxes I'll take note of), black boxes have parts that individually have enterprise support? Your RAID controller has support from one vendor, the main board has support from another vendor, and so on. Whereas a white box has zero support whatsoever?
Black box by definition has to have a single point of support because you don't know what components it has - hence black box. You can't support a black box, what's under the hood is abstracted from you.
When you buy a black box you commit 100% to relying on external support to tell you everything. That's the benefit, and the caveat, of appliances (aka black boxes.)
You can basically use the terms appliance or black box interchangeably.
Oh haha, I read that completely backwards... You were saying a black box is something that someone built FOR you, not that you built yourself. So if everything is abstract to you in a black box, how does a white box not fit into SAM-SD? You build it yourself for better performance and maybe less money, you have support on individual parts should they fail...
I understand that since each part has it's own vendor, and not a single point, that is not SAM-SD compliant... but if a Synology is a black box, and SAM-SD is a counter part (white box) then how do you get what is essentially a white box with a single point of contact for support?
-
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@wirestyle22 said in NAS or SAM-SD?:
Is a SAM-SD a Software Defined Network that is Scott Alan Miller compliant?
All an enterprise NAS is is a SAM-SD that someone built as a black box for you
If someone were to build a white box, or maybe a green box, would that still be compliant?
A white box device cannot be a NAS. Blackbox is part of the definition of a NAS.
White boxes cannot be enterprise (no support) so doesn't qualify as SAM-SD. That would just be a hobby class file server.
SAM-SD still requires enterprise hardware and support, but does not allow for black boxing as that is what it replaces.
So I'm 100% clear (my post was sarcasm if you didn't pick up on that, but there was a good point about white boxes I'll take note of), black boxes have parts that individually have enterprise support? Your RAID controller has support from one vendor, the main board has support from another vendor, and so on. Whereas a white box has zero support whatsoever?
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@wirestyle22 said in NAS or SAM-SD?:
Is a SAM-SD a Software Defined Network that is Scott Alan Miller compliant?
All an enterprise NAS is is a SAM-SD that someone built as a black box for you
If someone were to build a white box, or maybe a green box, would that still be compliant?
A white box device cannot be a NAS. Blackbox is part of the definition of a NAS.
White boxes cannot be enterprise (no support) so doesn't qualify as SAM-SD. That would just be a hobby class file server.
SAM-SD still requires enterprise hardware and support, but does not allow for black boxing as that is what it replaces.
So I'm 100% clear (my post was sarcasm if you didn't pick up on that, but there was a good point about white boxes I'll take note of), black boxes have parts that individually have enterprise support? Your RAID controller has support from one vendor, the main board has support from another vendor, and so on. Whereas a white box has zero support whatsoever?
Black box by definition has to have a single point of support because you don't know what components it has - hence black box. You can't support a black box, what's under the hood is abstracted from you.
When you buy a black box you commit 100% to relying on external support to tell you everything. That's the benefit, and the caveat, of appliances (aka black boxes.)
You can basically use the terms appliance or black box interchangeably.
Oh haha, I read that completely backwards... You were saying a black box is something that someone built FOR you, not that you built yourself. So if everything is abstract to you in a black box, how does a white box not fit into SAM-SD? You build it yourself for better performance and maybe less money, you have support on individual parts should they fail...
I understand that since each part has it's own vendor, and not a single point, that is not SAM-SD compliant... but if a Synology is a black box, and SAM-SD is a counter part (white box) then how do you get what is essentially a white box with a single point of contact for support?
Because you design the system with HP or Dell or whoever building it / testing it with you. You actively participate in the design of the system.
-
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@wirestyle22 said in NAS or SAM-SD?:
Is a SAM-SD a Software Defined Network that is Scott Alan Miller compliant?
All an enterprise NAS is is a SAM-SD that someone built as a black box for you
If someone were to build a white box, or maybe a green box, would that still be compliant?
A white box device cannot be a NAS. Blackbox is part of the definition of a NAS.
White boxes cannot be enterprise (no support) so doesn't qualify as SAM-SD. That would just be a hobby class file server.
SAM-SD still requires enterprise hardware and support, but does not allow for black boxing as that is what it replaces.
So I'm 100% clear (my post was sarcasm if you didn't pick up on that, but there was a good point about white boxes I'll take note of), black boxes have parts that individually have enterprise support? Your RAID controller has support from one vendor, the main board has support from another vendor, and so on. Whereas a white box has zero support whatsoever?
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@wirestyle22 said in NAS or SAM-SD?:
Is a SAM-SD a Software Defined Network that is Scott Alan Miller compliant?
All an enterprise NAS is is a SAM-SD that someone built as a black box for you
If someone were to build a white box, or maybe a green box, would that still be compliant?
A white box device cannot be a NAS. Blackbox is part of the definition of a NAS.
White boxes cannot be enterprise (no support) so doesn't qualify as SAM-SD. That would just be a hobby class file server.
SAM-SD still requires enterprise hardware and support, but does not allow for black boxing as that is what it replaces.
So I'm 100% clear (my post was sarcasm if you didn't pick up on that, but there was a good point about white boxes I'll take note of), black boxes have parts that individually have enterprise support? Your RAID controller has support from one vendor, the main board has support from another vendor, and so on. Whereas a white box has zero support whatsoever?
Black box by definition has to have a single point of support because you don't know what components it has - hence black box. You can't support a black box, what's under the hood is abstracted from you.
When you buy a black box you commit 100% to relying on external support to tell you everything. That's the benefit, and the caveat, of appliances (aka black boxes.)
You can basically use the terms appliance or black box interchangeably.
Oh haha, I read that completely backwards... You were saying a black box is something that someone built FOR you, not that you built yourself. So if everything is abstract to you in a black box, how does a white box not fit into SAM-SD? You build it yourself for better performance and maybe less money, you have support on individual parts should they fail...
I understand that since each part has it's own vendor, and not a single point, that is not SAM-SD compliant... but if a Synology is a black box, and SAM-SD is a counter part (white box) then how do you get what is essentially a white box with a single point of contact for support?
By purchasing from an enterprise vendor.
-
@DustinB3403 said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@wirestyle22 said in NAS or SAM-SD?:
Is a SAM-SD a Software Defined Network that is Scott Alan Miller compliant?
All an enterprise NAS is is a SAM-SD that someone built as a black box for you
If someone were to build a white box, or maybe a green box, would that still be compliant?
A white box device cannot be a NAS. Blackbox is part of the definition of a NAS.
White boxes cannot be enterprise (no support) so doesn't qualify as SAM-SD. That would just be a hobby class file server.
SAM-SD still requires enterprise hardware and support, but does not allow for black boxing as that is what it replaces.
So I'm 100% clear (my post was sarcasm if you didn't pick up on that, but there was a good point about white boxes I'll take note of), black boxes have parts that individually have enterprise support? Your RAID controller has support from one vendor, the main board has support from another vendor, and so on. Whereas a white box has zero support whatsoever?
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@wirestyle22 said in NAS or SAM-SD?:
Is a SAM-SD a Software Defined Network that is Scott Alan Miller compliant?
All an enterprise NAS is is a SAM-SD that someone built as a black box for you
If someone were to build a white box, or maybe a green box, would that still be compliant?
A white box device cannot be a NAS. Blackbox is part of the definition of a NAS.
White boxes cannot be enterprise (no support) so doesn't qualify as SAM-SD. That would just be a hobby class file server.
SAM-SD still requires enterprise hardware and support, but does not allow for black boxing as that is what it replaces.
So I'm 100% clear (my post was sarcasm if you didn't pick up on that, but there was a good point about white boxes I'll take note of), black boxes have parts that individually have enterprise support? Your RAID controller has support from one vendor, the main board has support from another vendor, and so on. Whereas a white box has zero support whatsoever?
Black box by definition has to have a single point of support because you don't know what components it has - hence black box. You can't support a black box, what's under the hood is abstracted from you.
When you buy a black box you commit 100% to relying on external support to tell you everything. That's the benefit, and the caveat, of appliances (aka black boxes.)
You can basically use the terms appliance or black box interchangeably.
Oh haha, I read that completely backwards... You were saying a black box is something that someone built FOR you, not that you built yourself. So if everything is abstract to you in a black box, how does a white box not fit into SAM-SD? You build it yourself for better performance and maybe less money, you have support on individual parts should they fail...
I understand that since each part has it's own vendor, and not a single point, that is not SAM-SD compliant... but if a Synology is a black box, and SAM-SD is a counter part (white box) then how do you get what is essentially a white box with a single point of contact for support?
Because you design the system with HP or Dell or whoever building it / testing it with you. You actively participate in the design of the system.
So like a build-to-buy?
-
@BBigford said in NAS or SAM-SD?:
@DustinB3403 said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@wirestyle22 said in NAS or SAM-SD?:
Is a SAM-SD a Software Defined Network that is Scott Alan Miller compliant?
All an enterprise NAS is is a SAM-SD that someone built as a black box for you
If someone were to build a white box, or maybe a green box, would that still be compliant?
A white box device cannot be a NAS. Blackbox is part of the definition of a NAS.
White boxes cannot be enterprise (no support) so doesn't qualify as SAM-SD. That would just be a hobby class file server.
SAM-SD still requires enterprise hardware and support, but does not allow for black boxing as that is what it replaces.
So I'm 100% clear (my post was sarcasm if you didn't pick up on that, but there was a good point about white boxes I'll take note of), black boxes have parts that individually have enterprise support? Your RAID controller has support from one vendor, the main board has support from another vendor, and so on. Whereas a white box has zero support whatsoever?
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@wirestyle22 said in NAS or SAM-SD?:
Is a SAM-SD a Software Defined Network that is Scott Alan Miller compliant?
All an enterprise NAS is is a SAM-SD that someone built as a black box for you
If someone were to build a white box, or maybe a green box, would that still be compliant?
A white box device cannot be a NAS. Blackbox is part of the definition of a NAS.
White boxes cannot be enterprise (no support) so doesn't qualify as SAM-SD. That would just be a hobby class file server.
SAM-SD still requires enterprise hardware and support, but does not allow for black boxing as that is what it replaces.
So I'm 100% clear (my post was sarcasm if you didn't pick up on that, but there was a good point about white boxes I'll take note of), black boxes have parts that individually have enterprise support? Your RAID controller has support from one vendor, the main board has support from another vendor, and so on. Whereas a white box has zero support whatsoever?
Black box by definition has to have a single point of support because you don't know what components it has - hence black box. You can't support a black box, what's under the hood is abstracted from you.
When you buy a black box you commit 100% to relying on external support to tell you everything. That's the benefit, and the caveat, of appliances (aka black boxes.)
You can basically use the terms appliance or black box interchangeably.
Oh haha, I read that completely backwards... You were saying a black box is something that someone built FOR you, not that you built yourself. So if everything is abstract to you in a black box, how does a white box not fit into SAM-SD? You build it yourself for better performance and maybe less money, you have support on individual parts should they fail...
I understand that since each part has it's own vendor, and not a single point, that is not SAM-SD compliant... but if a Synology is a black box, and SAM-SD is a counter part (white box) then how do you get what is essentially a white box with a single point of contact for support?
Because you design the system with HP or Dell or whoever building it / testing it with you. You actively participate in the design of the system.
So like a build-to-buy?
Or by actually talking to a sales rep. xByte would be included in this as well.
-
@coliver said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@DustinB3403 said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@wirestyle22 said in NAS or SAM-SD?:
Is a SAM-SD a Software Defined Network that is Scott Alan Miller compliant?
All an enterprise NAS is is a SAM-SD that someone built as a black box for you
If someone were to build a white box, or maybe a green box, would that still be compliant?
A white box device cannot be a NAS. Blackbox is part of the definition of a NAS.
White boxes cannot be enterprise (no support) so doesn't qualify as SAM-SD. That would just be a hobby class file server.
SAM-SD still requires enterprise hardware and support, but does not allow for black boxing as that is what it replaces.
So I'm 100% clear (my post was sarcasm if you didn't pick up on that, but there was a good point about white boxes I'll take note of), black boxes have parts that individually have enterprise support? Your RAID controller has support from one vendor, the main board has support from another vendor, and so on. Whereas a white box has zero support whatsoever?
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@wirestyle22 said in NAS or SAM-SD?:
Is a SAM-SD a Software Defined Network that is Scott Alan Miller compliant?
All an enterprise NAS is is a SAM-SD that someone built as a black box for you
If someone were to build a white box, or maybe a green box, would that still be compliant?
A white box device cannot be a NAS. Blackbox is part of the definition of a NAS.
White boxes cannot be enterprise (no support) so doesn't qualify as SAM-SD. That would just be a hobby class file server.
SAM-SD still requires enterprise hardware and support, but does not allow for black boxing as that is what it replaces.
So I'm 100% clear (my post was sarcasm if you didn't pick up on that, but there was a good point about white boxes I'll take note of), black boxes have parts that individually have enterprise support? Your RAID controller has support from one vendor, the main board has support from another vendor, and so on. Whereas a white box has zero support whatsoever?
Black box by definition has to have a single point of support because you don't know what components it has - hence black box. You can't support a black box, what's under the hood is abstracted from you.
When you buy a black box you commit 100% to relying on external support to tell you everything. That's the benefit, and the caveat, of appliances (aka black boxes.)
You can basically use the terms appliance or black box interchangeably.
Oh haha, I read that completely backwards... You were saying a black box is something that someone built FOR you, not that you built yourself. So if everything is abstract to you in a black box, how does a white box not fit into SAM-SD? You build it yourself for better performance and maybe less money, you have support on individual parts should they fail...
I understand that since each part has it's own vendor, and not a single point, that is not SAM-SD compliant... but if a Synology is a black box, and SAM-SD is a counter part (white box) then how do you get what is essentially a white box with a single point of contact for support?
Because you design the system with HP or Dell or whoever building it / testing it with you. You actively participate in the design of the system.
So like a build-to-buy?
Or by actually talking to a sales rep. xByte would be included in this as well.
How is that any different then just going to your business portal and picking out what you want? I'm failing to see the difference between different black boxes by definition... I know Synology isn't an enterprise class storage vendor, so is this essentially SAM-SD vs. Synology/etc? Since SAM-SD is more of a concept than an actual device...
-
@scottalanmiller said in NAS or SAM-SD?:
@dafyre said in NAS or SAM-SD?:
The main concern is for this to be a place for a department to store photos... One place... not 10 individual 1TB drives.
I've already done some price checking, and building a SAM-SD comes in at about half the price of a Synology for similar sizes going by straight up list prices... and this includes the 3 year NBD parts warranty from xByte.
For such a tiny project, why not get a two bay Synology and two RAID 10 drives in RAID 1. Or a four bay with four 6TB drives in RAID 10. These will be really cheap, cheaper than you can do a SAM-SD.
I'm shooting for reliability on these boxes because they are dealing with the University's Photo Archive. I'm not quite so concerned about throughput as I am being able to not lose data when a drive dies, lol.
Doing a 4-Bay in RAID 10 gives us 12 TB usable... That's an extra 2TB of growth, but I'm not sure what the growth rate is, and we have a new person in the position that does things differently than the last person, so we don't really know what the growth rate will be... I don't want to have to come back next year and go "Oops".
I'm just researching right now anyhow. But I'd rather slightly overbuild now, than have to come back and do this again in a year's time.
For ~$3k, I can get a SAM-SD with 36TB (12 x 3TB drives) and get 18TB of usable space... that should tide us over for a while.
I am planning to meet with the person so I can get some more details about all this. I just found out about it this morning, lol.
-
@coliver said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@DustinB3403 said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@wirestyle22 said in NAS or SAM-SD?:
Is a SAM-SD a Software Defined Network that is Scott Alan Miller compliant?
All an enterprise NAS is is a SAM-SD that someone built as a black box for you
If someone were to build a white box, or maybe a green box, would that still be compliant?
A white box device cannot be a NAS. Blackbox is part of the definition of a NAS.
White boxes cannot be enterprise (no support) so doesn't qualify as SAM-SD. That would just be a hobby class file server.
SAM-SD still requires enterprise hardware and support, but does not allow for black boxing as that is what it replaces.
So I'm 100% clear (my post was sarcasm if you didn't pick up on that, but there was a good point about white boxes I'll take note of), black boxes have parts that individually have enterprise support? Your RAID controller has support from one vendor, the main board has support from another vendor, and so on. Whereas a white box has zero support whatsoever?
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@wirestyle22 said in NAS or SAM-SD?:
Is a SAM-SD a Software Defined Network that is Scott Alan Miller compliant?
All an enterprise NAS is is a SAM-SD that someone built as a black box for you
If someone were to build a white box, or maybe a green box, would that still be compliant?
A white box device cannot be a NAS. Blackbox is part of the definition of a NAS.
White boxes cannot be enterprise (no support) so doesn't qualify as SAM-SD. That would just be a hobby class file server.
SAM-SD still requires enterprise hardware and support, but does not allow for black boxing as that is what it replaces.
So I'm 100% clear (my post was sarcasm if you didn't pick up on that, but there was a good point about white boxes I'll take note of), black boxes have parts that individually have enterprise support? Your RAID controller has support from one vendor, the main board has support from another vendor, and so on. Whereas a white box has zero support whatsoever?
Black box by definition has to have a single point of support because you don't know what components it has - hence black box. You can't support a black box, what's under the hood is abstracted from you.
When you buy a black box you commit 100% to relying on external support to tell you everything. That's the benefit, and the caveat, of appliances (aka black boxes.)
You can basically use the terms appliance or black box interchangeably.
Oh haha, I read that completely backwards... You were saying a black box is something that someone built FOR you, not that you built yourself. So if everything is abstract to you in a black box, how does a white box not fit into SAM-SD? You build it yourself for better performance and maybe less money, you have support on individual parts should they fail...
I understand that since each part has it's own vendor, and not a single point, that is not SAM-SD compliant... but if a Synology is a black box, and SAM-SD is a counter part (white box) then how do you get what is essentially a white box with a single point of contact for support?
Because you design the system with HP or Dell or whoever building it / testing it with you. You actively participate in the design of the system.
So like a build-to-buy?
Or by actually talking to a sales rep. xByte would be included in this as well.
Yepp! I'm already talking with @BradfromxByte
-
@BBigford said in NAS or SAM-SD?:
Oh haha, I read that completely backwards... You were saying a black box is something that someone built FOR you, not that you built yourself. So if everything is abstract to you in a black box, how does a white box not fit into SAM-SD? You build it yourself for better performance and maybe less money, you have support on individual parts should they fail...
Because white box is non-enterprise and a SAM-SD specifically requires enterprise gear and processes to be a considered a SAM-SD. The point of a SAM-SD is to create a counterpoint for business cases. That's what makes it a SAM-SD rather than "I just built a random file serving device."
Most people assume cheap non-enterprise white boxing and zero support when talking about NAS alternatives; that's why the SAM-SD specs were brought about to show how that was marketing and how the SAM-SD approach is basically the "always better" one outside of the reasons stated above for why it might not be beneficial.
-
@dafyre said in NAS or SAM-SD?:
For ~$3k, I can get a SAM-SD with 36TB (12 x 3TB drives) and get 18TB of usable space... that should tide us over for a while.
What are you looking at specifically, from xByte? I'm curious myself as we're going to be looking into the same thing about 6 months from now.
-
@BBigford said in NAS or SAM-SD?:
I understand that since each part has it's own vendor, and not a single point, that is not SAM-SD compliant... but if a Synology is a black box, and SAM-SD is a counter part (white box) then how do you get what is essentially a white box with a single point of contact for support?
I think you are misusing white box. Black boxes and white boxes are both niche. Neither is the standard case that a business would normally use. Enterprises either buy from an enterprise vendor like HPE, Dell, IBM, Oracle, Fujitsu or SuperMicro or they get into the building business, become and enterprise OEM and do it themselves (Facebook and Google.)
White box is not the counter to black box.
-
@BBigford said in NAS or SAM-SD?:
@coliver said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@DustinB3403 said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@wirestyle22 said in NAS or SAM-SD?:
Is a SAM-SD a Software Defined Network that is Scott Alan Miller compliant?
All an enterprise NAS is is a SAM-SD that someone built as a black box for you
If someone were to build a white box, or maybe a green box, would that still be compliant?
A white box device cannot be a NAS. Blackbox is part of the definition of a NAS.
White boxes cannot be enterprise (no support) so doesn't qualify as SAM-SD. That would just be a hobby class file server.
SAM-SD still requires enterprise hardware and support, but does not allow for black boxing as that is what it replaces.
So I'm 100% clear (my post was sarcasm if you didn't pick up on that, but there was a good point about white boxes I'll take note of), black boxes have parts that individually have enterprise support? Your RAID controller has support from one vendor, the main board has support from another vendor, and so on. Whereas a white box has zero support whatsoever?
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@wirestyle22 said in NAS or SAM-SD?:
Is a SAM-SD a Software Defined Network that is Scott Alan Miller compliant?
All an enterprise NAS is is a SAM-SD that someone built as a black box for you
If someone were to build a white box, or maybe a green box, would that still be compliant?
A white box device cannot be a NAS. Blackbox is part of the definition of a NAS.
White boxes cannot be enterprise (no support) so doesn't qualify as SAM-SD. That would just be a hobby class file server.
SAM-SD still requires enterprise hardware and support, but does not allow for black boxing as that is what it replaces.
So I'm 100% clear (my post was sarcasm if you didn't pick up on that, but there was a good point about white boxes I'll take note of), black boxes have parts that individually have enterprise support? Your RAID controller has support from one vendor, the main board has support from another vendor, and so on. Whereas a white box has zero support whatsoever?
Black box by definition has to have a single point of support because you don't know what components it has - hence black box. You can't support a black box, what's under the hood is abstracted from you.
When you buy a black box you commit 100% to relying on external support to tell you everything. That's the benefit, and the caveat, of appliances (aka black boxes.)
You can basically use the terms appliance or black box interchangeably.
Oh haha, I read that completely backwards... You were saying a black box is something that someone built FOR you, not that you built yourself. So if everything is abstract to you in a black box, how does a white box not fit into SAM-SD? You build it yourself for better performance and maybe less money, you have support on individual parts should they fail...
I understand that since each part has it's own vendor, and not a single point, that is not SAM-SD compliant... but if a Synology is a black box, and SAM-SD is a counter part (white box) then how do you get what is essentially a white box with a single point of contact for support?
Because you design the system with HP or Dell or whoever building it / testing it with you. You actively participate in the design of the system.
So like a build-to-buy?
Or by actually talking to a sales rep. xByte would be included in this as well.
How is that any different then just going to your business portal and picking out what you want? I'm failing to see the difference between different black boxes by definition... I know Synology isn't an enterprise class storage vendor, so is this essentially SAM-SD vs. Synology/etc? Since SAM-SD is more of a concept than an actual device...
SAM-SD is essentially a concept but one for which specific specifications have been made for reference implementations.
The SAM-SD Zero and the SAM-SD 1 were both very real, very spec'd devices. But SAM-SD on its own is a concept to provide the enterprise standard alternative to NAS blackboxing.
-
@BBigford said in NAS or SAM-SD?:
@coliver said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@DustinB3403 said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@wirestyle22 said in NAS or SAM-SD?:
Is a SAM-SD a Software Defined Network that is Scott Alan Miller compliant?
All an enterprise NAS is is a SAM-SD that someone built as a black box for you
If someone were to build a white box, or maybe a green box, would that still be compliant?
A white box device cannot be a NAS. Blackbox is part of the definition of a NAS.
White boxes cannot be enterprise (no support) so doesn't qualify as SAM-SD. That would just be a hobby class file server.
SAM-SD still requires enterprise hardware and support, but does not allow for black boxing as that is what it replaces.
So I'm 100% clear (my post was sarcasm if you didn't pick up on that, but there was a good point about white boxes I'll take note of), black boxes have parts that individually have enterprise support? Your RAID controller has support from one vendor, the main board has support from another vendor, and so on. Whereas a white box has zero support whatsoever?
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@wirestyle22 said in NAS or SAM-SD?:
Is a SAM-SD a Software Defined Network that is Scott Alan Miller compliant?
All an enterprise NAS is is a SAM-SD that someone built as a black box for you
If someone were to build a white box, or maybe a green box, would that still be compliant?
A white box device cannot be a NAS. Blackbox is part of the definition of a NAS.
White boxes cannot be enterprise (no support) so doesn't qualify as SAM-SD. That would just be a hobby class file server.
SAM-SD still requires enterprise hardware and support, but does not allow for black boxing as that is what it replaces.
So I'm 100% clear (my post was sarcasm if you didn't pick up on that, but there was a good point about white boxes I'll take note of), black boxes have parts that individually have enterprise support? Your RAID controller has support from one vendor, the main board has support from another vendor, and so on. Whereas a white box has zero support whatsoever?
Black box by definition has to have a single point of support because you don't know what components it has - hence black box. You can't support a black box, what's under the hood is abstracted from you.
When you buy a black box you commit 100% to relying on external support to tell you everything. That's the benefit, and the caveat, of appliances (aka black boxes.)
You can basically use the terms appliance or black box interchangeably.
Oh haha, I read that completely backwards... You were saying a black box is something that someone built FOR you, not that you built yourself. So if everything is abstract to you in a black box, how does a white box not fit into SAM-SD? You build it yourself for better performance and maybe less money, you have support on individual parts should they fail...
I understand that since each part has it's own vendor, and not a single point, that is not SAM-SD compliant... but if a Synology is a black box, and SAM-SD is a counter part (white box) then how do you get what is essentially a white box with a single point of contact for support?
Because you design the system with HP or Dell or whoever building it / testing it with you. You actively participate in the design of the system.
So like a build-to-buy?
Or by actually talking to a sales rep. xByte would be included in this as well.
How is that any different then just going to your business portal and picking out what you want? I'm failing to see the difference between different black boxes by definition... I know Synology isn't an enterprise class storage vendor, so is this essentially SAM-SD vs. Synology/etc? Since SAM-SD is more of a concept than an actual device...
It's not. Picking to purchase and talking to a sales rep are essentially the same thing. The sales rep has the added expertise of knowing their product and what will and won't work, to an extent, with it.
Think of appliance (black boxes) vs commodity servers. The appliance comes with the hardware and software tied together and you have no actual control of the underlying system outside of what the management interface allows. With a commodity server, from an enterprise vendor, you choose the underlying hardware, the operating system, and the software that is running on that operating system. Everything is in your control and accessible to you.
The big difference between a white-box and a commodity server is that the commodity server has a single point of support. For instance purchasing from Dell will allow you to contact Dell if any single piece goes bad, from a hard drive to a CPU you contact Dell for literally everything. Not only that but Dell can get you parts in a fraction of the time.
-
@scottalanmiller said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
I understand that since each part has it's own vendor, and not a single point, that is not SAM-SD compliant... but if a Synology is a black box, and SAM-SD is a counter part (white box) then how do you get what is essentially a white box with a single point of contact for support?
I think you are misusing white box. Black boxes and white boxes are both niche. Neither is the standard case that a business would normally use. Enterprises either buy from an enterprise vendor like HPE, Dell, IBM, Oracle, Fujitsu or SuperMicro or they get into the building business, become and enterprise OEM and do it themselves (Facebook and Google.)
White box is not the counter to black box.
So then this falls into the category of a black box? By simply spec'ing it out myself and having a single point of contact... http://configure.us.dell.com/dellstore/config.aspx?oc=pe_r830_1190&model_id=poweredge-r830&c=us&l=en&s=bsd&cs=04
-
@BBigford said in NAS or SAM-SD?:
@scottalanmiller said in NAS or SAM-SD?:
@BBigford said in NAS or SAM-SD?:
I understand that since each part has it's own vendor, and not a single point, that is not SAM-SD compliant... but if a Synology is a black box, and SAM-SD is a counter part (white box) then how do you get what is essentially a white box with a single point of contact for support?
I think you are misusing white box. Black boxes and white boxes are both niche. Neither is the standard case that a business would normally use. Enterprises either buy from an enterprise vendor like HPE, Dell, IBM, Oracle, Fujitsu or SuperMicro or they get into the building business, become and enterprise OEM and do it themselves (Facebook and Google.)
White box is not the counter to black box.
So then this falls into the category of a black box? By simply spec'ing it out myself and having a single point of contact... http://configure.us.dell.com/dellstore/config.aspx?oc=pe_r830_1190&model_id=poweredge-r830&c=us&l=en&s=bsd&cs=04
Nope, that's an enterprise server.
-
@BBigford said in NAS or SAM-SD?:
@dafyre said in NAS or SAM-SD?:
For ~$3k, I can get a SAM-SD with 36TB (12 x 3TB drives) and get 18TB of usable space... that should tide us over for a while.
What are you looking at specifically, from xByte? I'm curious myself as we're going to be looking into the same thing about 6 months from now.
R510, and 12 x 3TB NL-SAS drives, Front Bezel, Rail Kit, and 3 Year NBD Parts Warranty... Comes out to ~$2,750 -- that's list price on their site.
Also, I am going to take a moment to tell @BradfromxByte : Be sure to pass 1,000 Thank Yous and Well Wishes to the Web Developers and whoever it was that makes the pricing information so easy to find on your site!
-
@dafyre said in NAS or SAM-SD?:
Doing a 4-Bay in RAID 10 gives us 12 TB usable... That's an extra 2TB of growth, but I'm not sure what the growth rate is, and we have a new person in the position that does things differently than the last person, so we don't really know what the growth rate will be... I don't want to have to come back next year and go "Oops".
Then just don't say "oops." That's the only problem there that I see. If you buy more than this and you DON'T grow too much in a year, will you go to management and say "oops, we bought too much last year?" If not, you are forcing a bad decision based on a weird way to respond to management.
http://www.smbitjournal.com/2012/10/you-arent-gonna-need-it/
Storage especially is something you don't buy proactively unless you really, really know what your growth rate is. This example already builds in 20% cushion more than your original stated spec. That's huge. If you are growing faster than that can accommodate, then any planning you do now is going to be reckless or wrong and you need time to figure out what you need. If you are not growing faster, then this is the right decision anyway.
The highest risk, biggest mistake decision is spending a lot today for growth you do not expect tomorrow. That's the biggest "oops." If you grow slowly, you lose. If you grow quickly, you lose. You only win with a tiny, nearly impossible to hit growth number and even then, given the time value of money and the time cost reduction of storage you might lose regardless.
All you do is go to management and say "we need to grow", don't say oops. Don't suggest oops. In fact, point out what a great decision it was now that leads to needing more storage later. The only oops is not having to buy more down the road.