@jaredbusch I wasn't suggesting me... Maybe he is close with someone in the community he would trust...

Not sure, but I think if we modification the script inside /etc/init.d/openfire file it may work.

I have tried to replace the openfire file with openfire 4.1 version under /etc/init.d, now the pid error is not there and starting the service but after 3-4 sec its Shutting down openfire

Starting SYSV: Openfire is an XMPP server, which is a server that facilitates XML based communication, such as chat....
su[1614]: (to root) root on none
openfire[1601]: Starting openfire:
systemd[1]: Started SYSV: Openfire is an XMPP server, which is a server that facilitates XML based communication, such as chat....
..........................
openfire[1649]: Shutting down openfire: [FAILED]

Here is a good example of why this is complex even for blind swap hardware RAID... it's not always clear what it is supposed to do.

https://mangolassi.it/topic/17314/replaced-drive-in-pe-t410-not-adding-to-virtual-disk/

@jaredbusch said in NextCloud as a Win10 VM:

@scottalanmiller said in NextCloud as a Win10 VM:

@gjacobse said in NextCloud as a Win10 VM:

As an experiment - could you run Nextcloud as a VM on Windows 10, use the Windows file system for storage?

Can you run NextCloud on Windows 10?

Not officially, the pieces needed for it are not available. You can get around 1. by porting or writing all of the necessary pieces for it on Windows. Using the Windows FS is not the same as running on Windows. This couldn't possibly have a purpose. Windows 10 licensing would likely prohibit this due to the range of capabilities in NextCloud.

He is not running it on windows 10. He is running it in a VM under Hyper-V on windows 10.

Well that's just silly, it'll run the same as it does under Hyper-V on Server 2016 using Windows NTFS under it. That's what he has already.

If you ever need to report a Microsoft partner for ethics breaches, you can email [email protected]

@kelly said in Google DNS Issues and Super Slow Office 365 Portal- Anyone Else?:

For future reference, doing a traceroute and noting what the typical path is for your traffic can help you when it slows down. Then you can rerun the trace and see if the path is different. If a node goes down or has issues you may be rerouted on the larger internet. This doesn't work as well as it did in the past as we move into virtualized networks and things appear and disappear on demand, but it may work for you. I would usually choose a target logically closer than a public DNS.

Yeah, I did a tracert to see if there was any obvious issue at the various hops, but it came back with reasonable results at first.

@obsolesce It's called paravirtualization. And Xen has done it since the 1990s 🙂 Only Xen could do it for the entire VM, not just the drivers.

Yeah after my limited experience with this, not sure I would ever trust using a non-DELL drive.

At least on a production system.

selinux is disabled, and I have all of the ports listed in their documentation added to firewalld. . .

@jaredbusch said in Windows VMs on Linux VPS. Possible?:

@siringo said in Windows VMs on Linux VPS. Possible?:

@jaredbusch said in Windows VMs on Linux VPS. Possible?:

@siringo said in Windows VMs on Linux VPS. Possible?:

@obsolesce said in Windows VMs on Linux VPS. Possible?:

Visit spice space and install the guest tools in your VM.

Thanks for the suggestion, but that's outside my area of competance ATM.

https://www.spice-space.org/download/windows/spice-guest-tools/spice-guest-tools-latest.exe

I had another look at this last night.
I've installed, sorry if this sounds a little confused, I'm not a Linux user, KVM/QEMU onto my Fedora laptop and managed to install a copy of Server 2016 as a VM. Only problem is I cannot get the mouse & keyboard to switch from physical to virtual hosts, it's a real mess, very very frustrating, so frustrating in fact I nuked Fedora & installed Ubuntu. But that's as far as I got last night.
I'm going to try my luck with Virtualbox on Ubuntu.

What is it with Fedora anyway? Seems like a darn fiddly thing to use.

Did you install the spice driver into the windows instance? If not, of course nothing works.

No mate I didn't, I wasn't sure what to do and it was getting late so I just changed plans. This entire thing is about learning new bits and pieces, so there's no grief with any of it.

Thanks everyone for all the help so far.

@obsolesce said in Fedora 28 and network share:

smb://server/share

Thanks - I'll give that a go in the future.

@jaredbusch said in ScreenConnect High CPU Usage:

@scottalanmiller said in ScreenConnect High CPU Usage:

Have another system doing this this week. Been about eight hours so far. We are thinking that it is just doing the database rebuild and compression work. But it is insane how much CPU gets used for this.

Do you not have it doing this on a regular schedule?

Not my system, it was moved to a different server and had to be rebuilt.

This really old post gives a clue on what the structure is for their firmware numbering.

http://forum.yealink.com/forum/showthread.php?tid=1661

The template of Firmware name of Yealink phone is X1.X2.X3.X4

(1) X1 means the Phone Model

X1- Phone Model

T4 Series
35 - T48G
28 - T46G
29 - T42G
36 - T41P

(2) X2 means the Major version number

X2-Major version number
61 - V61
70 - V70
71 - V71
72 - V72

(3) X3 means the Custom or Neutral version

0 or 1 means Neutral version
Non 0 or 1 means Custom version

(4) X4 means the Minor version
Yealink will release some minor versions after solving some bugs.

The lawyer and I got a bit nastier and finally someone in tech support gave up the "real" legal contact info after all kinds of run around. We've had their attorney respond now, after a month of going after them. They only responded when we got a bit more angry and included their upstream vendor in the conversation (they resell Tucows) so they had their partner watching them because they knew we'd be knocking on their door next to ask Sherweb to be shut down.

@wrx7m said in Raised Floor budget estimate:

@coliver said in Raised Floor budget estimate:

Best option would be to get someone in to quote it out. I'm not a fan of raised floor systems I prefer overhead and if you have the space for a raised floor you often have the space to go overhead as well.

I have never dealt with a raised floor system, but I definitely don't want to crawl around if I can stand on a short step ladder instead. I had a very basic overhead ladder system installed in our server room and it is super easy to route new cables or pull old ones out.

Agreed. Though a raised floor looks much nicer, it is going to be less convenient for any maintenance. Usually aesthetics doesn't go along with convenience in my experience.

@emad-r said in Trying to correctly understand core licensing in a vmware environment:

@dave247

maybe this was answered here, but I was wondering if someone can correct me on this

If i put WIndows server VM with 2 cores on Hypervisor any brand which has 8 cores.

Do i need to license windows server VM for 2 cores or 8 cores ?

There are no cores at the VM level, those are vCPUs. Windows is licensed by cores, not by vCPUs. Cores are always physical, and the minimum is 16. No matter how you configure the VMs and vCPUs, you have to license 16 cores at a minimum.

A single vCPU could use sixteen cores or more to power it, the licensing is by the available power, not the configuration.

@scottalanmiller said in Multiple switches - connection:

@ccwtech said in Multiple switches - connection:

For connecting multiple switches (3 in this case), if your router has Gigabit LAN, is it best to to have a cord from 3 different ports on the router to each switch or to have the router go into 1 switch and then daisy chain the switches... or... does it really matter?

Neither. Router to Switch at the hub, then spoke other switches.

Correct. that is what I said, in a slightly more technical way.

The problem is solved after the below changes on the Databases:

SET GLOBAL TRANSACTION ISOLATION LEVEL READ COMMITTED; SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;

To verify :

SELECT @@GLOBAL.tx_isolation, @@tx_isolation

@scottalanmiller said in Anyone running Exchange 2016 on Server 2016?:

This is MS' bread and butter. While I've not tried it, if it is officially supported I'd have little concern.

0_1527484744157_430b78c9-7eee-4e5f-bc84-fcbdfdf77a3e-image.png